Hey Matt, I love the videos, they’ve been quick, clear and direct info to these motors. Thanks a ton. Also the Australian accent mate! Keep the videos coming!
@MattBerrymotorsport4 жыл бұрын
Hi guys i've posted two great video links below, be sure to check out both of them! HOW TO BUILD YOUR OWN 4-1 COLLECTOR: kzfaq.info/get/bejne/o7J2ZMKa0Mu4hw.html FIRST START UP WITH THE NEW EXHAUST MANIFOLD: kzfaq.info/get/bejne/hraPor17vaqUoZc.html
@ep91v4 жыл бұрын
Would love one of these
@seanalexander95313 жыл бұрын
Great job Matt, that was a joy to watch!
@ellistonvaccianna91204 жыл бұрын
Loving this so much...I need one just like that
@MattBerrymotorsport4 жыл бұрын
It definitely makes life easier having ac and a big radiator!
@MrSinester1004 жыл бұрын
thanks for the showing the technique
@james139143 жыл бұрын
Hey mate so just wondering if you could comment a link for them plastic things you are using as they would be a god sent. I dont even know where to look or what they even would he called! They are so good
@lamarbayley5674 жыл бұрын
Hey Matt i need one of these manifold made man very nice
@MattBerrymotorsport4 жыл бұрын
Might start doing orders if I get enough interest.
@jacobburns29754 жыл бұрын
That’s sick bro
@megasxlv3 жыл бұрын
So underrated
@rx7tbo4 жыл бұрын
Awesome! R u looking to do more of these? I’d be interested in one with EWG flange!
@Ricerguy4 жыл бұрын
Awesome work :D
@MattBerrymotorsport4 жыл бұрын
Thanks man do you still drive your itb starlet? I've watched a few of your videos
@Ricerguy4 жыл бұрын
@@MattBerrymotorsport I drive it every day. I bought another starlet to daily but that broke... So I drive ol'faithful. It needs some love though.
@antonjimmy56363 жыл бұрын
My aircon doesn't work, and don't need it in New Zealand anyway. Just need to get a new daily then I'll see how long an NA 4E lasts... haha
@djfrankieflowers Жыл бұрын
The TD05 kit you made is amazing. Do you still sell it? I need to find your email to ask a few questions.
@tiagorocco123 жыл бұрын
It's Very good Job! Did you use a 1.1/4 schedule pipe?
@tomaszgozdz27693 жыл бұрын
Hi Matt , do you know where I can buy the rubber pipes/elbows you have used for manifold modelling? What is the name for these elements?
@r-chassisdomination87054 жыл бұрын
Hey man I'm in Darwin. How much is a manifold for a 7afe?
@dominiquehigby95372 жыл бұрын
How much will it cost to build me one of this manifold?
@fabriziopandolfi18573 жыл бұрын
Did you back purging when welding the manifold?
@mickholgate33474 жыл бұрын
Awesome stuff Matt. Been waiting for this one. Wonder if its worth laying a finishing weld over the root pass welds? Might make it stronger and tidy it up before ceramic coating.
@MattBerrymotorsport4 жыл бұрын
You are probably right Mick but seeing as I'm no certified welder, the last ones on the blue car held up so I think I'm just going to wing it this time around 😂 I have faith they will be alright, I think I need to improve my technique next time so they turn out a bit nicer
@andremiller61663 жыл бұрын
I want to turbo my stock 4efe
@luckystig12 жыл бұрын
@@andremiller6166 do it.
@UNLOCKCONNECTIONS3 жыл бұрын
How much would you sell one of those same manifold for the E engine for? I also have a 5E Engine
@jacobburns29754 жыл бұрын
But standard engine low boost?
@user-fu1ju2my4w Жыл бұрын
I whant one
@shalannaidu48354 жыл бұрын
The red plastic pieces you used to configure the bends, was that a special kit for this manifold or is it a product you can buy to make up any manifold?
@MattBerrymotorsport4 жыл бұрын
It from engineiceworks.com it's a kit that is suitable to make any manifold you like
@Virhe893 жыл бұрын
You ment www.icengineworks.com/?
@nashgautney81174 жыл бұрын
Niice welds
@MattBerrymotorsport4 жыл бұрын
Far from perfect but self taught thanks to youtube videos haha thanks mate
@alidchiken78553 жыл бұрын
Hai matt
@alidchiken78553 жыл бұрын
Do.I need to change my original piston when I use tdo4
@djfrankieflowers Жыл бұрын
Doesn’t the TD05 have a different flange compared to the GTX 7036?
@MattBerrymotorsport Жыл бұрын
Yea
@the.reuben.singh..27743 жыл бұрын
Hey Matt what diameter tube did you use for the collectors
@shangocarmods12703 жыл бұрын
Hey do those exhaust manifold sell ? I’m doing a build have a tdo4 with a 4efe setup
@kronicismygame4 жыл бұрын
love the work mate, when we gonna see the blue meanie ripping down the drags at hidden valley? also how long is it taking you to throw together this manifold you just made?
@MattBerrymotorsport4 жыл бұрын
As soon as these restrictions are lifted
@MattBerrymotorsport4 жыл бұрын
About 20 hours. I don't have a lot of experience with the Tig welder so I was painfully slow and putting it together lol
@jacobburns29754 жыл бұрын
Could you do something similar on a 2006 carolla 1.8 ?
@MattBerrymotorsport4 жыл бұрын
Yeah depends what turbo and where it has to sit. There was a lot of labour in this manifold because I was so restricted for room
@Yungltd4 жыл бұрын
Is it possible to put upgraded pistons in without dropping the engine out
@MattBerrymotorsport4 жыл бұрын
yes for sure! as long as the new pistons fitted are the same size as the ones coming out. head off, sump off, undo the rod bolts and pull the pistons and rods out the top of the block. your pistons will either be 74mm, 74.5mm or 75mm
@Yungltd4 жыл бұрын
Matt Berry how much power could I run on just upgraded pistons and rods
@Yungltd4 жыл бұрын
Matt Berry and how would find out my piston size without taking head off
@MattBerrymotorsport4 жыл бұрын
@@Yungltd i made 301 HP on 20 psi on a bone stock 5e engine for over two years with no problems however 5 years ago i had a full forged engine and destroyed it at only 200 hp because of a bad batch of fuel and trying to make big hp on small frame turbo...It all depends on your setup and what turbo you are running. In other words a Larger turbo means less back pressure at higher boost levels.
@MattBerrymotorsport4 жыл бұрын
@@Yungltd head must come off. No other way to tell
@quamiemillar4 жыл бұрын
Hey Matt, does the performance valves and springs in the 4EFE also fit the 4AFE? Been hearing they flow better.
@MattBerrymotorsport4 жыл бұрын
I am 100% sure the valves are different. I don't know about the springs though
@MattBerrymotorsport4 жыл бұрын
If you want to increase flow your best option is to buy a good set of cams and run the stock valves
@tundacat27034 жыл бұрын
Have any builds thats power steering and ac compatible with the EP91?
@MattBerrymotorsport4 жыл бұрын
Looking at the manifold in this current video, if I re route number 1 runner to go behind the oil filter it is Power steering compatible as well as a/c.
@tundacat27034 жыл бұрын
@@MattBerrymotorsport , oh yes. Went back through the video, you did mention it. Lovely work.
@MattBerrymotorsport4 жыл бұрын
@@tundacat2703 thanks mate :)
@jimarosgalanidis40643 жыл бұрын
Hey Matt i was wandering, is this tubing stainless or not. And what is the thickness of this tube?
@MattBerrymotorsport3 жыл бұрын
hi its just mild steel steam pipe. its about 4mm
@jimarosgalanidis40643 жыл бұрын
@@MattBerrymotorsportthanks Matt! Is it the diameter of the starlet exhaust ports or bigger?
@MaliSupra4 жыл бұрын
Do you sell any manifolds kits in aus
@MattBerrymotorsport4 жыл бұрын
Hi I made this one for a customer, however it depends on what exactly you want. Is it for a starlet?
@MaliSupra4 жыл бұрын
Matt Berry I have an ep82 gt starlet looking to change the manifold as my turbo is hitting the oil filter
@MattBerrymotorsport4 жыл бұрын
@@MaliSupra cool yeah I'll be looking to sell manifold eventually. What sort of turbo are you using? Internal waste gate? I estimate the cost will be around $1000.
@VTRCONCEPT4 жыл бұрын
Bro i need help to know what the best aftermarket brand of crank and rod bearings also the piston rings for rebuild my 5efe. Can you help me on this? I live in Brasil and here are fucking hard to find this. I'll import.
@MattBerrymotorsport4 жыл бұрын
Do you need standard or oversized bearings? Is it a turbo build and how much power are you trying to make? Is it a generation 1 5efe or a generation 2 5efe?
@VTRCONCEPT4 жыл бұрын
@@MattBerrymotorsport i need a oversized. I'll not instal a turbo now but i want to do soon. About generation i dont know my car is a toyota paseo 94. If you have a Instagram acount send me plesae @ovictorventura. I apreciate if you can help me on my project
@MattBerrymotorsport4 жыл бұрын
@@VTRCONCEPT I don't have Instagram sorry. Does your Paseo have distributor or does it have coil packs? That will determine what series engine it is. Is there anything wrong with the engine or you just want to rebuild it?
@VTRCONCEPT4 жыл бұрын
@@MattBerrymotorsport ohhh my engine are distributor we dont have 5efe with coil pack in brazil. My engine have no serious problem. I just wanna rebuild.
@MattBerrymotorsport4 жыл бұрын
For a stock engine you can't beat toyota bearings. If there is nothing wrong with your engine there really is no point in rebuilding it. If you just want to learn, there is no problem with just stripping it all down, cleaning all the hard carbon and old oil off everything and then re assemble it. Good luck 😊😊
@road_2_pow_r4 жыл бұрын
what is the red pipes called?
@MattBerrymotorsport4 жыл бұрын
iceengineworks.com
@road_2_pow_r4 жыл бұрын
@@MattBerrymotorsport is the website correct? i cant see it
@MattBerrymotorsport4 жыл бұрын
@@road_2_pow_r thats it sorry mate
@andraevickers4414 жыл бұрын
Can u make one for me.
@MattBerrymotorsport4 жыл бұрын
Was quite a lot of time to make this. I'd need to work out all my costs. But yes I can