I have a same problem

I love you a loooooooooooooooooooooooooooooooooooot

I have the same problem too

i have same problem to

same like you,fix that draft please

Thanks for watching

Thanks for watching

👍🏽

Long press push button then you will see selection menu and select self test.

@@ElectroRetro thanks!! Could you explain the calibration procedure in future?

Yes, actually this project is not made by me. You can see the real maker of this project in description. I just replicated this project.

@@ElectroRetro thankyou so much!

🙂

code- www.mediafire.com/file/wogykbevqauy8xv/ArduTester_1_13_%25281%2529.zip/file

No

Yeah same problem bro , lcd is not working

No

carlosjsd Hace 1 segundo plouc68000 3 months ago Hi Serlen, you are lucky, stucked home because the Covid-19 sanitary emergency, I have produced a more advanced version of the ArduTester, with most common Display drivers. This version I am Testing and then publishing as a new Project, with focusing on 4 Harware Configurations: ( Config. changes only by editing the Makefile.h, then Verify and Upload ). The UNO with 1602 LCD Parallel interface The UNO with 1602 LCD with I2C Interface The MEGA with 1602 LCD with I2C interface ( and Freq Counter ) The MEGA with Graphic Display 1306 OLED 128 X 64 with I2C interface ( and Freq. Counter ) Here the code for a UNO with a 1602 LCD with I2C interface ( adr. 0x27) create.arduino.cc/editor/plouc68000/629cf0ba-4afa-459e-8165-2407f51bbedf/preview SDA,SCL are the standart UNO Pins for I2C. SDA is A4, SCL is A5, Test Button D7, Test Pins A0..A2, RL,-RH D8..D13 Hope it works for you ! Thanks to alanpo for his inputs about the I2C for the 1602 LCD, it was all good hints ! Comentarios in: create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

This is an automatic Transistor Tester, to identify pinout and characteristics of various discrete semiconductors ( Transistors NPN, PNP, MOSFETs, etc ). It's also evaluating resistors, capacitors

You most likely forgot to put a } or ;

@@ElectroRetro But I didn't make any changes to the code, it wasn't supposed to be giving errors

@@ElectroRetro Now there is only 1 error: in function 'void setup ()': 343:14: error: return-statement with a value, in function returning 'void' [-fpermissive]

Try self test to calibrate the tester and BTW this tester can't measure voltage.

@@ElectroRetro i have added this frature

Yes

Yes, you can test inductors.

@@ElectroRetro great then... I'll definitely try this one... Thanks

Actually this project is not made by me. You can see the real maker of this project in description. I just replicated this project.

For only serial monitor output, uncomment the lines in Makefile.h

www.mediafire.com/file/v5ggtcd0mllgl68/ArduTester_1_13.zip/file

No

Make sure the LCD to Arduino pins are correct. Connect like shown in the video.

Connect like this, arduino pin 2 to lcd D7, arduino pin 3 to lcd D6, arduino pin 4 to lcd D5, arduino pin 5 to lcd D4, arduino pin 6 to lcd E, arduino pin 7 to lcd RS.

I did the same connections on proteus but it kept giving me random characters I used LCD 16x2 in proteus is there any thing I need to handle ? @@ElectroRetro

LCD 16x2 LM016L@@ElectroRetro

make sure you are connecting 1602 lcd pins to arduino the right way, arduino pin 2 to lcd D7, arduino pin 3 to lcd D6, arduino pin 4 to lcd D5, arduino pin 5 to lcd D4, arduino pin 6 to lcd E, arduino pin 7 to lcd RS.

@@ElectroRetro yes i do. But, displayed on lcd like cinese or someting else caracter

Make me a logo IMZ=●《 _Noobmasterr_》

make sure you are connecting 1602 lcd pins to arduino the right way, arduino pin 2 to lcd D7, arduino pin 3 to lcd D6, arduino pin 4 to lcd D5, arduino pin 5 to lcd D4, arduino pin 6 to lcd E, arduino pin 7 to lcd RS.

@@ElectroRetro can you send me your email id? Mine is - sinusoidalsg@gmail.com I want to discuss something about this project. I connected properly all the components but it doesn't work!!!

You can install the required libraries from arduino library manager.

@@ElectroRetro i tried but didn't find can you provide zip of all of it on G Drive plz?

Which libraries are missing?

@@ElectroRetro i searched for first two but i didn't find , there's 23 .h files like maths.h , Makefile.h , Transistortester.h i can't find it

While compiling which library is showing as missing?

You need to make this yourself.

@@ElectroRetro no, just but i want to purchase this Instrument, for my practical work. You can make for me? Is this available in market.

megaeshop.pk/esr-t4-meter-mega328-digital-transistor-tester-diode-capacitance-meter-lcr.html

It can also test resistors

@@ElectroRetro While I appreciate your efforts, it doesn't test resistors very well.using a 220ohm resistor across pins A3 and A4 connections on the board it shows as P-IFET 123=G. Then across pins A3 and A2 it shows as 1-||-31 4843L 116.7 ESR=,00ohm It also gives similar readings across pins A3 and A4. I wonder if anyone else finds the same. Thanks

U need to calibrate.

@@ElectroRetro Unfortunately I don't get 'Not Calibrated' but 'Unknown or damaged part' then when I press the button, it goes round in a loop. Is there a readable schematic for this circuit as the .fzz file is not. Thanks

You need fritzing software to open that file.

You can get the code in description

Can please send me more details about the error.

Thanks for the reply , when we have use updated version of IDE the code compiles properly , but the lcd is not showing anything it blinks and stops

Did you try old Arduino IDE?

Yeah old one was showing some error

In new one , code is running properly but after uploading lcd is not working , blink for a sec only and stops , can you guide me what to do , can we connect on call if possible?

No

@@ElectroRetro can we make a system where we can test ic's, resistors, capacitors

I think yes, not every IC's. Some IC's like logic ic, etc. If you want to test one particular IC, you can make a custom circuit to test only that IC.

Yes

@@ElectroRetro without modify the code?

Use Ardutester millenium create.arduino.cc/projecthub/plouc68000/ardutester-millenium-the-ultimate-uno-mega-versions-c81db4

Yes

Code is there in description but It will work only in arduino uno or atmega 328p pu

plouc68000 3 months ago Hi Serlen, you are lucky, stucked home because the Covid-19 sanitary emergency, I have produced a more advanced version of the ArduTester, with most common Display drivers. This version I am Testing and then publishing as a new Project, with focusing on 4 Harware Configurations: ( Config. changes only by editing the Makefile.h, then Verify and Upload ). The UNO with 1602 LCD Parallel interface The UNO with 1602 LCD with I2C Interface The MEGA with 1602 LCD with I2C interface ( and Freq Counter ) The MEGA with Graphic Display 1306 OLED 128 X 64 with I2C interface ( and Freq. Counter ) Here the code for a UNO with a 1602 LCD with I2C interface ( adr. 0x27) create.arduino.cc/editor/plouc68000/629cf0ba-4afa-459e-8165-2407f51bbedf/preview SDA,SCL are the standart UNO Pins for I2C. SDA is A4, SCL is A5, Test Button D7, Test Pins A0..A2, RL,-RH D8..D13 Hope it works for you ! Thanks to alanpo for his inputs about the I2C for the 1602 LCD, it was all good hints ! Comentarios in: create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

Maybe there is a error in your code try uploading blink or any example code

I am not a programmer and i used your program so i found a error i tell you. so please help me to solve the problem

Try uploading this code www.mediafire.com/file/wogykbevqauy8xv/ArduTester_1_13_%25281%2529.zip/file

Link in description.

But coding open nahi ho raha hai

Please help me mujhe clg mae yahi project banana hai

create.arduino.cc/editor/plouc68000/d6b548e6-37af-4cf0-b95f-cbaa9e89ea72/preview

What's the problem?

I change version Arduino 1.8.9 and the message don't appear but on screen appear only arduino v1.13 Testing without give me test any component

?

@@ElectroRetro C:\Users\John\AppData\Local\Temp\arduino_modified_sketch_276019/sketch_jun20a.ino:1349: undefined reference to `lcd_pgm_string(unsigned char const*)' collect2.exe: error: ld returned 1 exit status how to slove this problem