How to make a decorative bezel for cabochon | Pickling solution and preventing fire scale

Рет қаралды 16,712

Күн бұрын

How to make a bezel for cabochon? How to make a bezel for cabochon using gallery wire? How to make a decorative bezel?? Today I will answer these questions in my new step by step jewelry making tutorial! I will discuss what I use for pickling and cleaning silver while soldering, what I use to prevent fire scale and special butter I use for sawing and drilling. In other words, today I will be testing Bench Basics from Pepetools!
Huge thank you to @PepetoolsUSA for partnering with me on this video! I've used their new Bench Basics, including Pickling Powder, Smart Flux and Blade Butter, as well as awesome Superior Ring Bending Tool and Haymaker Saw Frame (Lion Punch Forge). Below are all relevant links you will need to find Pepetools website! Enjoy watching :) Thank you so much Pepetools for working with me on this project!
⭐️Bench Basics:
Smart Flux: pepetools.com/products/smart-...
Smart Flux mist applicator: pepetools.com/products/fine-m...
Smart Pickle: pepetools.com/products/smart-...
Blade Butter: pepetools.com/products/blade-...
⭐️Superior Ring Bending Tool pepetools.com/products/superi...
⭐️Smart Size US Ring Sizing Kit: pepetools.com/products/smarts...
⭐️Haymaker Saw Frame pepetools.com/products/haymak...
⭐️ Pepetools:
- Website: pepetools.com/
- Instagram: / pepetools_usa
- Channel: / pepetoolsusa
⭐️ My mini online course: How to make silver flowers: art-of-metalsmithing.thinkifi...
⭐️ Enjoyed this video?? Why not check out similar ones!
- How to make a spinner ring for anxiety: • I make a SPINNER RING ...
- How to make an open moon ring: • How to make an OPEN RI...
- How to make an open back bezel: • Transparent pendant - ...
⭐️ Additional resources can be found on my Patreon page!
Find out more about becoming a Patron and ways to support the production of the videos: / stardustmine
⭐️ JEWELRY MAKING TUTORIALS:
UNISEX RING step by step tutorial: • HOW TO MAKE A RING - t...
BEZEL step by step tutorial: • SILVER BEZEL for caboc...
RING from start to finish: • How to make a ring - f...
LABRADORITE RING: • How to make a ring wit...
EASY STACKIG RINGS: • How to make EASY STACK...
AN EASY PENDANT: • HOW TO MAKE A PENDANT ...
STUD EARRINGS: • How to make Alpaca ste...
STEAMPUNK RING: • STEAMPUNK ring - turni...
GOLD FILLED STUDS: • How to make GOLD FILLE...
⭐️ TOOLS, MATERIALS, RESOURCES:
Metal starter pack: • BASIC METAL for silver...
Most Basic Tools: • MOST BASIC SILVERSMITH...
Basic silversmithing tools: • Learn silversmithing: ...
Books to learn silversmithing: • Silversmithing BOOKS &...
DIY workbench: • Easy DIY JEWELER'S BEN...
How to fill a butane torch: • Learn silversmithing: ...
Sawing for beginners part 1: • Silversmithing For Beg...
Sawing for beginners part 2: • Silversmithing For Beg...
Soldering surfaces: • My SOLDERING SURFACES ...
Rotary tool and flex shaft attachments: • Pendant motor ATTACHME...
How to use jump ring maker: • How to make JUMP RINGS...
How to use ring bending tool: • Pepetools RING BENDING...
How to find gemstone sellers? Tips from JEWELRY MAKERS: • BUYING GEMSTONES: How ...
How to source gemstones, tips from lapidary artist and gem cutter, Mineral Rare: • BUYING GEMSTONES: How ...
How to source gemstones? SUMMARY & tips: • BUYING GEMSTONES: tips...
⭐️ LET’S CONNECT!
My website: stardustmine.art/
Instagram: / stardustmine.art
Facebook: / stardustminejewellery
Pinterest: / thestardustmine
Sub count: 73,974
#howtomakebezel #jewelrymaking #jewelrytutorial

Пікірлер: 113

@TheArtOfMetalsmithing 2 жыл бұрын

Have you used galley wires for setting cabochons before? Or are you going to try them out now? Today I'm sharing step by step tutorial how I use these wires in my jewellery :) Thank you for watching! ⭐️ Enjoyed this video?? Why not check out similar ones! - How to make a spinner ring for anxiety: kzfaq.info/get/bejne/i5afhcSAnc6Ykqs.html - How to make an open moon ring: kzfaq.info/get/bejne/qtuUl9GAr8zDhHU.html - How to make an open back bezel: kzfaq.info/get/bejne/gp19ptl41rDQfXU.html

@chloewillis7353 Жыл бұрын

My gallery wire melted 😢 what did I do wrong?

@TheArtOfMetalsmithing Жыл бұрын

@@chloewillis7353 I'm so sorry this has happened, Chloe, I feel your pain 😢❤️ It was most likely too much heat. You have to be extra careful with gallery wire, just like with fine silver, it melts very fast, because there's not much metal when there are a lot of cutouts. So it heats up really fast and can melt. I hope next attempt will be much better! Good luck ❤️

@chloewillis7353 Жыл бұрын

@@TheArtOfMetalsmithing thankyou! I had one more try and got it perfect! I needed to keep taking the heat away. Love your videos 😁

@Susanarylander Жыл бұрын

@@chloewillis7353 IF trying to solder gallery wire to backplate try from underneath, using a tripod

@wigglesworth3717 2 жыл бұрын

I watch an awful lot of how-to jewelry videos but your videos actually inspire me to get to work!

@ShannonShenanigans79 2 жыл бұрын

And you show all the products that you use so we can buy them!!! You are the best! I'm saving these videos that way I can get some of the things that you have that I don't have little by little. Thank you for doing such a great step by step tutorial that is not only simple to understand but informative!

@Aldine_InkBlack 2 жыл бұрын

Love watching your videos. I'm new to metal smithing and I always find the best hacks, tips and tricks on your channel. Thank you for sharing your knowledge with the world.

@ShannonShenanigans79 2 жыл бұрын

Had no clue about the baking soda! Oh girl,, I AM SO GLAD I found you!

@jeannettesalazar6442 6 ай бұрын

I become addicted to your videos. I am learning by myself to make jewellery and you are the best tutor I founded. Thanks so much.😊❤

@mawi1172 Жыл бұрын

You are truly making beautiful jewelry! 😍😍😍😍😍🇺🇲

@icatz 2 жыл бұрын

Very nicely done. Your pieces are always so clean. TFS 💖🦅🦅

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you, that's very kind ❤️

@janearcher3834 2 жыл бұрын

Nice video, lovely work. Thank you for the tip about using double sticky tape for when fitting the bezel to the stone.

@TheArtOfMetalsmithing 2 жыл бұрын

My pleasure Jane! It was a life saver for me, as I was losing my mind trying to hold small gems while wrapping them in bezel wire haha 😂

@daddydayne 2 жыл бұрын

Absolutely stunning as usual and the jewelry is equally as beautiful 🤭 it's wonderful to see such passion and care you take for all of your creations it really does show in the pieces you make how much you love what you do ☺️ XXX thank you being you x

@myearthlytreasures3 Жыл бұрын

Beautiful work!

@maryleemartz3722 2 ай бұрын

They all are very pretty!

@reneepariseau1184 Жыл бұрын

Thank you! Your videos are awesome!

@TheArtOfMetalsmithing Жыл бұрын

I'm very happy you enjoy them! Thank you so much for watching, Renee ❤

@Lucy4n89 2 жыл бұрын

Amazing as always! Thanks Basia!

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you so much! Happy you enjoyed it 😍💕

@reginatrif 2 жыл бұрын

I used to have a red/pink pickle which was really strong but it's been a few years since I last bought it -from Greece- and I am not sure I can find it again. Thanks for sharing, it's mesmerising to watch your process in your workstation with these high end tools! 🙌

@tishsmiddy71 2 жыл бұрын

Thank you ☺️ I had a wonderful time , 🤟🏻❤️💋🎉

@natashafuller155 Жыл бұрын

I love using that gallery wire! Thanks for the tips with Pepe’s bench basics products!

@creativeFlutter 2 жыл бұрын

Great video!! I'm a newbie, loved watching your process.

@tammiehonican76 Жыл бұрын

Thank you for these videos!

@TheArtOfMetalsmithing Жыл бұрын

Glad you like them! You're very welcome :) Thank you for watching!

@Nancy4133nope 2 жыл бұрын

Excellent video as all you videos always are thank you for posting the videos you make

@TheArtOfMetalsmithing 2 жыл бұрын

my pleasure Nancy! I'm very happy that you enjoy watching them :)) All the best xx

@johngpreston1784 Жыл бұрын

Definitely going to give gallery wire a go. Thanks!

@TheArtOfMetalsmithing 11 ай бұрын

Totally! I'm sure you'll like it a lot, it's great :)

@allanthompson9695 Жыл бұрын

Beautiful piece. Great tips. Thanks Basia.

@TheArtOfMetalsmithing Жыл бұрын

Thank you! I appreciate it a lot ❤️

@kerrysmith1019 2 жыл бұрын

Thanks for the tip about checking the fit of the stone by dropping it from the top. I just made a bezel which I thought fitted, but of course when I soldered on the back plate it didn't fit anymore 😆

@TheArtOfMetalsmithing 2 жыл бұрын

you're very welcome! I completely understand you, I did the same thing before and it's such a pain! I hope you will be able to fix your bezel 😀

@esliet 2 жыл бұрын

Awesome information thank you

@TheArtOfMetalsmithing 2 жыл бұрын

Glad you enjoyed it! Thank you for watching :))

@Denaesartisanjewelry 2 жыл бұрын

I ALSO JUST GOT THE BENCH BASICS SET! I did not get thr pickle just because I don't need any yet. But I'm excited to try it!! I LOVE, LOVE, LOVE the Smart Flux and I also got the ErgoLast Pick! The blade butter.... I love the way it works... I don't like how I have to use my finger to apply it.... maybe that's just me... But it is GREAT! Your work is BEAUTIFUL as usual!! And those stones!😍😍😍😍😍😍 I hope you all are safe and healthy!!!!!❤❤❤

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you ao much lovely for your sweet comment! I appreciate it a lot ❤️ Very excited for you to try these bench basics, I was very impressed with the smart flux. I have that pick too? It's awesome. As for the blade butter, I can relate. I'm quite particular about textures and tpuch, so I was worried I might have some problems with it, but fortunately in my case it's bearable 😂😁 Maybe try applying with a wet cosmetic tip? Or something similar. We are ok and healthy, thank you so much for asking ❤️ I hope you are well too! Take care and have a wonderful weekend 💕

@stephencoster9532 2 жыл бұрын

Hiya Denae, Rather than your finger to apply the blade butter, I use a broken saw blade, or you could use a cocktail stick. I use it for applying paste solder too. Steve...

@simplyshandara 2 жыл бұрын

Wow this is so creative. Absolutely love these pieces. They’re simply beautiful.

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you so much lovely! I'm glad you like them and enjoyed the video :))

@TheAyersoftChannel 2 жыл бұрын

I think this has been your best video yet !

@TheArtOfMetalsmithing 2 жыл бұрын

wow, thank you Jake! I'm very happy you liked it!

@celesteg9020 2 жыл бұрын

I learned some great tips from the video! I also will try some of the Pepe products! Thanks again for sharing your valuable time and knowledge💕

@TheArtOfMetalsmithing 2 жыл бұрын

You are very welcome Celeste! Thank you so much for watching and you kind words, I appreciate it a lot 😊🙏

@realLWD 2 жыл бұрын

As usual, a fantastic video. Thankyou. THose look so elegant, almost 'royal'. I'm definitely gonna try gallery wire out.

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you so much for watching! I love the look of gallery wires. There are different shapes available and each one gives you a different vibe and style. I especially loved how the ring turned out

@vikasgoswami1929 2 жыл бұрын

Nice

@quietspacearts Жыл бұрын

very talented

@TheArtOfMetalsmithing Жыл бұрын

Thank you! ️❤

@mialora5337 2 жыл бұрын

I love your videos! So helpful, and you are so beautiful and talented!

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you so much!! You're very sweet, I'm gald you enjoy my videos, thank you for watching!

@AnneStanDesigns 2 жыл бұрын

Hello I hope you’re doing well. Love the tips. My current pickle is citric acid that’s pretty inexpensive from Amazon. The citric acid doubles as a cleaning agent for greasy pans ☺️ I may have to try that pickle from Pepe when I graduate from a coffee cup to an actual pickle pot 🤣 Beautiful work as usual

@TheArtOfMetalsmithing 2 жыл бұрын

I'm sure that once you feel you're ready to get a stronger pickle, you'll find this one very useful :)) In the meantime, I think what you're using now is great! Thank you so much for watching, I'm happy you enjoyed it 🌺

@jjsmama401 Жыл бұрын

Whoa! What is that technique you’ve got going with the black (charcoal?) soldering block and the wire?!?! Maybe that’s what I need to try!

@stephencoster9532 Жыл бұрын

Hiya Laurie, It's iron-binding wire. You tightly wrap the charcoal block to stop it from splitting. You can get it from jewellery supply companies. Stay safe, Steve...

@jewelrybybeathe 2 жыл бұрын

Beautiful pieces :D Love the gallery wire, its so pretty ^^ First time i used gallery wire i melted one of the bits on it xD

@TheArtOfMetalsmithing 2 жыл бұрын

Yes, we have to be careful when working with it, as it can melt easily haha 😄 Thank you so much for watching Beathe

@ShannonShenanigans79 2 жыл бұрын

I did that with two of my Sterling silvers, I'm just learning and I guess I don't know maybe I had the heat on it for too long and the rings started melting! LMAO 🤣 I put it in my little junk sterling silver pile

@ShannonShenanigans79 2 жыл бұрын

Yeah I have tons of questions like what was that paste that you mixed up, what is it for? Did you put it on the metal? Oh I'm so excited to try your ways!

@stephencoster9532 Жыл бұрын

Hiya ADHD, Love the name. The paste is a flux used to keep the silver from oxidising under heat and allow the solder to flow. Basia also used the Bench basics flux. You put it on the metal where you are going to solder. May I recommend getting any and all books on jewellery making you can find, from beginners to advanced? The jewellery suppliers sell them, but you can also find them on Amazon. This will help you learn now rather than wait till someone sees your question and answers them. Your local library may have some too. Best of luck, and stay safe, Steve...

@StellaAdvani Жыл бұрын

Hi, thank you for another inspiring post. Could you share a link to the wire you use for the ring shank? Thanks!

@stephencoster9532 Жыл бұрын

I think it was flat sterling silver wire, I could guess the size, but knowing me??? Stay safe, Steve...

@carolarana6900 8 ай бұрын

Hi, thanks for this beautiful ring. Do you mind to tell us what kind of wire you use below the bezel when you are soldering it? Thank you again!

@magalifargeon7342 Жыл бұрын

Hello, such an interesting vidéo as usually, thank you !!! Could you tell me the name of the patina you used please ? Thanks for your sharings😉

@danapruner7094 Жыл бұрын

Question.... Regarding the ring with the two different gallery wires… does the solder placed on the inside of the bezel flow out to both that bezel as well as the beaded wire bezel? Or do you place bits of solder under the beaded wire as well and heat them all up at the same time? Thanks!

@meriemnadjladrabla8568 2 жыл бұрын

Hello, hope you are happy and healthy ^^ I was wondering what ripe of drill you used for the small hole... Love your videos as always

@TheArtOfMetalsmithing 2 жыл бұрын

I'm well, thank you so much 🙏💕 Hmm, I'm not sure what I used actually... I think it was a little drill by Dremel, but I don't remember the size. It was pretty small though

@dianahurbanova1520 2 жыл бұрын

Hi, I just saw that you were drilling on the top of that wood (don't know it's name but you know what i mean). You can buy/get some wooden block and drill on the top of it :) It might be easier to replace :) at least we used those at school :D Anyway, great video (as always). I didn't know that bead wire exists. I thought you need to attach it one by one :D (At least in my school we would need to do it. We even had to make wires XD It was time consuming T_T )

@jeannettesalazar6442 6 ай бұрын

I ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ it😊

@TXLPE Жыл бұрын

What beautiful work! Is the solder you use hard, medium or easy please? Thank you.

@TheArtOfMetalsmithing Жыл бұрын

I use all of them, especially if there are multiple joints. You don't want to melt your piece while soldering more, so it's usually best to start with hard solder, then medium and easy the last. To solder ring bands and ear posts, I recommend hard solder!

@carolarana6900 10 ай бұрын

Beautiful ring❤ can you tell us the gauge of the beaded wire?, please. Thanks!

@eljay0110 2 жыл бұрын

How do you dispose of your pickle?

@patredden4557 2 жыл бұрын

Thank you very much for another great video, I have some gallery wire that I haven’t tried yet. I’m inspired now. What is that wire thing made out of that you have on your charcoal block? Looks very handy.

@stephencoster9532 Жыл бұрын

Hiya pat, It's iron wire. Sold at most good jewellery suppliers for binding pieces together to solder. Also called 'binding wire'. Also used to bind up charcoal blocks to stop them from splitting. Stay safe, Steve...

@patredden4557 Жыл бұрын

@@stephencoster9532 thanks so much.

@albertpartridge2194 2 жыл бұрын

hiya flower nice vlog how are things with you take care keep well keep safe

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you Albert, I'm doing well :) Thank you, I'm glad you you enjoyed the video

@jeannettesalazar6442 6 ай бұрын

Basia what double sticker paper did you use to stick your design?please tell me.thanks😊❤

@Susanarylander 2 жыл бұрын

Hi Basia! I adore your videos. Explain things so well. And your voice is soothing! 1)how do you determine ring size when it’s not completely closed (like using the Pi formula)? Someone once mentioned Rosie recover mandrel. Is that how? 2)do you find yourself doing more open back?because of the price of silver I’m now looking to do more and more of that 3)have you ever soldered silver bezel wire onto copper backplate? i did it once but very carefully from below because the copper needed so much heat. Any advice? 4) (sorry so many …) when using a binding wire nest you aim the flame to the charcoal and let it bounce back? I tried to get the flame underneath using my nest and my nest wasn’t high enough!

@TheArtOfMetalsmithing 2 жыл бұрын

I'm glad you enjoyed it Susan! Thank you for watching :) I haven't worked with copper, just one attempt long time ago. I use regular calculations or the calculator on Rio Grande's website. And then I account for a little chunk of silver I cut off to make an open ring. I also use Rosy Revolver mandrel, whcih helps with that. I like both open and closed back of the bezel and it usually depends on the stone I;m using or the size of the gem. I heat up around the metal on the charcoal block and I use the nest to heat up from below. I reshape the nest whenever I need to make it taller :)

@Susanarylander 2 жыл бұрын

@@TheArtOfMetalsmithing thanks!

@jjsmama401 Жыл бұрын

Awesome! Thank you! I’ve been trying to make some rings and often, when soldering my bezel to the base plate, the bezel will melt at the point where it was previously soldered together. Not just the solder melting, but a bit of the surrounding silver too. Why does this keep happening? I understand the need to use easy solder, medium solder, etc. So I try to use a harder solder first because I’m going to be soldering about 3 times total on the piece. But often, by the time I’m on my 2nd step, my bezel melts through. I keep ruining my pieces! Is the bezel wire too thin?

@stephencoster9532 Жыл бұрын

Not too thin as very thin, and has a lower melting point. Try using med solder first, then just easy solder. Once the solder has been melted in use, its melting point goes up. It will not melt as quickly as it did. Fine silver is a pain; Basia is very experienced; I melted some the other day. It is very easy to say to yourself, "One second more, then... then it melts..." Practice is the only way out of it. Best of luck, to you, oh and me I guess too... Stay safe, Steve...

@compound63 Жыл бұрын

@THE ART OF METALSMITH PLEASE, if you don’t mind, where is your fave place to get the ring band in 925 silver? Thanks so much!!

@stephencoster9532 Жыл бұрын

I believe Basia just buys flat wire or cuts it from silver plate from a jewellery supplier. Stay safe, Steve...

@jjsmama401 Жыл бұрын

Oh also, sometimes I get a gap between my base plate and my bezel, because it wasn’t flat enough. Any tips on how to fix that? Just sand it after you solder it closed? Is there any way to fix it once you’ve made that mistake?

@stephencoster9532 Жыл бұрын

Sorry, yes, file/sand it flat. A piece of emery cloth or wet & dry laid flat on the bench, then work the bezel in a figure 8 pattern until there is no gap. If you are using fancy topped wire like Basia was, you can use a pencil eraser held flat on top to hold and move the bezel wire. Make sure the piece you are soldering to is flat. If you go back over Basias' videos, there are many tips & tricks films with hints like the eraser. Would you be able to fix it after? De-solder, the base, flatten the base, and then re-solder.

@crowfoot7355 2 жыл бұрын

Love your demos and creations. What gauge backplate do you use generally?

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you! Very happy to hear that :)) For a ring or pendant like these in the video I prefer 0.50mm - 0.60mm

@crowfoot7355 2 жыл бұрын

@@TheArtOfMetalsmithing Thank you

@flyingcheff 2 жыл бұрын

Basia, can you share why you use baking soda water for quench? I understand why baking soda is good for post pickle, but before....I don't know why. I understand that baking soda neutralizes pickle, would quenching in baking soda water compromise the pickle and it's job? Quite a quandary....thanks! Oh, and I LOVE how you used a bead as your bail, that looks great!

@kimauger4293 2 жыл бұрын

I too thought that placing your metal in the neutralizer before placing in the pickle would cause problems. Unless you rinse with water after the baking soda solution, then some of the neutralizer will be going into your pickle pot. I would think that this would weaken your pickle over time. I love your videos and I’m always learning from you. Thank you for sharing with us.

@stephencoster9532 Жыл бұрын

Hiya, The baking soda is to neutralise any acidic effect from the pickle. Using only one bowl of water is mainly for convenience, although some books do say that flux needs to be naturalised before pickle. All I know is it works. Steve...

@flyingcheff Жыл бұрын

@Stephen Coster Hi there, so great to get any response. So, I totally get the neutralizing of the pickle (a POST pickle dip), but I was wondering why she used a baking soda/water quench BEFORE she pickled. In my studies and experience, baking soda neutralizes pickle, so why use it before you pickle? I would think over time, the baking soda in the pre-pickle quench would ultimately reduce the effectiveness of the pickling process (bakig sida would migrate into the pickle from the quench). So, still no answer. But you are spot on about neutralizing pickle with baking soda. I imagine the perfect set-up would be a quench in plain water, pickles, then water/baking soda dip. Thanks again for jumping in to help.

@stephencoster9532 Жыл бұрын

@@flyingcheffsome 'experts' say to neutralise after soldering so the chemicals in the flux don't react with the pickle. I just wish I could remember where I read or heard that. So in an ideal world, you would solder, soda dip, clear water dip, pickle, soda dip, clear water dip, dry and use. If you ever find anyone who does that, I would be surprised. I would imagine the chemists around would tell us to use different solutions for each dip, so a line of bowls.

@chalaegarcia456 2 жыл бұрын

Love llove please where do u buy ur bezels Thank u

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you :) I shared that info in the video

@user-zt2ll7pr2p Жыл бұрын

Do you use glue to make sure the stones stay in place or trust that the bezels will hold?

@TheArtOfMetalsmithing Жыл бұрын

Most of the time I work with the bezel, making sure the fit is as good as possible. However, using glue isn't forbidden in jewelry making, I recommend reading about it here: orchid.ganoksin.com/t/to-glue-or-not-to-glue/31280/4

@stephencoster9532 2 жыл бұрын

Hiya Lady Stardust, you are looking good, as always... Thank you for the video, what great stones, I particularly love the Agat. I think I need those bezels on my bench and those Bench Basics? Yes, please. The lube does look awkward to apply, have you tried a broken saw blade? Even you must have some of them? I use them to apply the solder paste too. When you were cutting the bezel wire with tin snips I knew you'd be reaching for the saw soon, and I was right. Seeing you without a saw in hand doesn't look right somehow. Was the wire fine silver? You certainly seem to get a lot of firescale prevention, a common moan about 'Fire Scoff' is the size of the bottle and how soon it runs out. Does postage cost a lot from the USA, and did you have to pay customs when you were here? Nice to see a yoghurt pot being re-purposed in the pickel pot. Stay safe please you two, Steve...

@TheArtOfMetalsmithing 2 жыл бұрын

Thank you so much Steve! I'm happy you enjoyed the video. I haven't tried a broken saw blade, but I was thinking about using a q tip? Or something similar. Good idea with the broken blade though, will try that next time! Haha, true, I feel weird without holding my saw for too long! I'm very excited about upcoming projects, as I will be sawing much more often. I just miss my big bench a lot, because it was more comfortable for sawing. I can't wait to bring it back to the workshop when I can. The wire was sterling silver. Oh dear, you made me realise that I forgot to put one clip in the video! I was talking about the Fire Scoff. I've used it before and it's such a tiny bottle for a lot of money. And the bottle was leaking! So a lot of the product got wasted... I'm not sure how much is postage from USA. I did pay some customs once, another time I didn't, so it's hard to predict. Also, not a yoghurt, but a soup container! Hahaha 😂 Take care Steve xx

@stephencoster9532 2 жыл бұрын

@@TheArtOfMetalsmithingHiya, close though, what was the soup? Something good knowing you. I've heard about leaking bottles too, I think I'll look into Pepes' soon. Typical that it also costs a lot too. Which one works better? From your video, I would guess that one from the coverage on the silver. Have you used Argentium yet? 500mm of 2mm square wire the sterling was £3 cheaper, so very little difference. You don't get fire-scale due to there being less copper. They use Germanium, and it's 935 rather than 925, so more silver. No copper so it's hypoallergenic, another good sales point, but not re-cycled though. I think Cooksons have all the findings too, plus solder, H, M, E. Stay safe, Steve xx...

@lyixina Жыл бұрын

Where can I buy gallery wires? Thanks

@stephencoster9532 Жыл бұрын

Basia tells you on the screen near the end.

@Susanarylander Жыл бұрын

Basia, what is the colored nuts on your Haymaker? You bought them separately? My original ones give me a hard time!

@TheArtOfMetalsmithing Жыл бұрын

No, my saw frame arrived with those. I recommend you contact Pepetools regarding yours, I'm sure they will be able to assist you and help with the issue :)

@Susanarylander Жыл бұрын

@@TheArtOfMetalsmithing thank you!