How To Make A DIY Arduino Obstacle Avoiding Car At Home

Рет қаралды 4,801,918

5 жыл бұрын

Hello Guys, In this tutorial, I am going to show you how to make a DIY Arduino Obstacle Avoiding Car. So let's get started :)
Subscribe Its Free bit.ly/2WlyA8Y
------------------------------------------------------------
Find electronic components on www.utsource.net/
Utsource is a professional electronics supplier with more than 2 million products, lower price with free shipping.
Here's the Parts List:
(Banggood.com)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Motor Driver Shield - bit.ly/2VWaYsn
3) Wheels (4x) - bit.ly/2suQJEY
4) TT Gear Motor (4x) - bit.ly/2Rtg2G9
5) Servo Motor - bit.ly/2Soq7E4
6) Ultrasonic Sensor - bit.ly/2RzebL7
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - bit.ly/2sulLwu
8) Male and Female Jumper wire - bit.ly/2su6mfM
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
(Amazon.in)
1) Arduino Uno - amzn.to/35flEXS
2) Motor Driver Shield - amzn.to/30Z9ijj
3) TT Gear Motor and wheels set - amzn.to/31WSD0Z
4) Servo Motor - amzn.to/2IAigNH
5) Ultrasonic Sensor - amzn.to/33fwrQa
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - amzn.to/33iY4b3
8) Male and Female Jumper wire - amzn.to/2MmRjOE
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
[Flyrobo.in]
Arduino Uno : bit.ly/2m8HZnL
Motor Driver Shield : bit.ly/2mvO7XL
Wheels : bit.ly/2kxPeFF
TT Gear Motor : bit.ly/2m4fMid
servo motor : bit.ly/2MIdoaB
Ultrasonic Sensor : bit.ly/2McGLm1
Male and Female Jumper wire : bit.ly/2mu0aVo
-------------------------------------------------------
Here's the code link - bit.ly/2m6JJhq
Libraries Link - bit.ly/2MbQ9Xi
Circuit Diagram - bit.ly/2MF2Zw7
-------------------------------------------------------
More Arduino Car Related Projects
1) Arduino Voice Controlled Car - bit.ly/2WUdsuR
2) Arduino Bluetooth Controlled Car - bit.ly/2WpYPuX
3) Arduino Line Follower Car - bit.ly/2ZimqPV
4) NodeMCU WIFI Controlled Car - bit.ly/2XA941d
----------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.
If you have any question related to this project then let me know in this comment section below :)
Here my social sites:
Facebook: / surajit.maju. .
Instructables: www.instructables.com/member/S...
twitter: / diybuilder1
Instagram : / surajit_majumdar
-------------------------------------------------------------
Background Music:
Bongo by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Bongo - KV (No Copyrig...
Spring by Ikson / ikson
Music promoted by Audio Library • Spring - Ikson (No Cop...
----------------------------------------------------
#DIY #ArduinoProject #SmartRobot
----------------------------------------------------

Пікірлер: 4 500

@stephanduplessis2797 3 жыл бұрын

THANK YOU SO MUCH BC IM TAKING ROBOTICS CLASS NEXT WEEK AND THIS HELPED A TON THANKS

@andrewmelville8560 Жыл бұрын

4 years on, this excellent article still works; built one today for my grandson's birthday. Magic stuff! 🙂

@rodeliodompor4446 Жыл бұрын

how'd do you do it? mine only beeps but dont move, i already got the libraries and i follow the circuit diagram, can you help me?

@andrewmelville8560 Жыл бұрын

@@rodeliodompor4446 Hi, When I first tried it after building, mine didn't move either. What I found was I had the motor connections wrong. You must NOT just connect all 4 motors positive to positive and negative to negative. if you do that, the front wheels are trying to go forward and the rear wheels are going backwards, so it stands still. On mine. the 2 front wheels have the red/blue wires; the rear wheels have green/yellow. Try reversing the green/yellow connections on the motor drive shield. I hope this helps.

@rodeliodompor4446 Жыл бұрын

@@andrewmelville8560 I already tried it but unfortunately it still doesn't move, I tried lifting it up to test if the wheels cancel each other but they still doesn't move

@andrewmelville8560 Жыл бұрын

@@rodeliodompor4446 Hi, I am sorry that did not work for you. The only other thing I can suggest is to make sure that the servo connection goes to the right terminals (there are two separate servo channels) - 6:08 in the video.

@andrewmelville8560 Жыл бұрын

Hi, a couple of other thoughts have come to mind; firstly - can you let me know if you definitely uploaded the sketch through the Arduino IDE? Did you get confirmation that it had uploaded successfully?

@muhammadalvi1514 10 ай бұрын

It's been 4 years since this video encouraged me about Arduino. A lot of memories with this. I really impressed what a single development board can do. After that, I continuously watch your videos. I also loved your other robot car videos. You're the best Arduino related KZfaqr, atleast for me. Hope you'll continue with new new projects which may be small or big.

@DIYBuilder 10 ай бұрын

Thank you so much for your heartfelt comment, I'm grateful for your continuous support, it means a lot to me. I'll do my best to keep bringing you fresh content, whether it's a small or big project. Once again, thank you for being a part of this journey with me ❤❤❤

@mahirahman855 10 ай бұрын

@@DIYBuilder Can I install the code by mobile phone

@mahirahman855 10 ай бұрын

@@DIYBuildermeans smart phone. Plz reply to my comment

@user-xm5kf2lw7q 8 ай бұрын

Nice work

@AryanKumar-jo9gt 6 ай бұрын

@@DIYBuildercan we use a clone compatible Uno board with the same coding that you have provided 😢😢😢

@hellokittyyy480 8 ай бұрын

You deserve more subscribers for this amazing content.

@chinelodaminhocaYT 3 жыл бұрын

After so many videos, the first one tha really covered all the aspects that matter.

@vedantlotlikar_yt 3 ай бұрын

u did the thing ?

@Bablukumarchaudhari815 2 ай бұрын

@umarnlw 4 жыл бұрын

This is the first video which gives a very detailed information. Thank you so much for this

@minecraftmike934 3 жыл бұрын

Umar Mobile stolen comment

@jacobsaccount9353 3 жыл бұрын

Why on earth would u copie and paste some one else comment 😂😂😂wtf

@AKElectroTech 2 жыл бұрын

kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@MASKEDMAN_OBITO_UCHIHA Жыл бұрын

This is very easy and it is a good project.I have done this project for my school competition

@YeahBoi9880 Жыл бұрын

Nostalgia hits me hard watching this video after so long.

@hollywoodclips2521 4 жыл бұрын

Whenever I want to make any project I always watch your channel

@punichelak9572 3 жыл бұрын

Ye sender kaha se milte hai

@bhonemyat147 3 жыл бұрын

It’s the best quality among the platform

@Bruceiwish1234 3 жыл бұрын

did you have to download from the link as that site tries to install media fire on the pc and its full of viruses, where did you get the code please

@swatimishra687 4 жыл бұрын

This is the first video which gives a very detailed information. Thank you so much for this .

@jaganinilkanth7082 4 жыл бұрын

Iska code hain aapke pas

@hollywoodclips2521 4 жыл бұрын

Code is in description

@Bruceiwish1234 3 жыл бұрын

did you have to download from the link as that site tries to install media fire on the pc and its full of viruses, where did you get the code please

@AKElectroTech 2 жыл бұрын

And this is the 2nd kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@AKElectroTech 2 жыл бұрын

@@jaganinilkanth7082 kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@fatimazeeshan166 8 ай бұрын

Your project work is fantastic

@ammarhafeez9156 Жыл бұрын

I make it today according to your guide code and library and it's working perfectly. THANKYOU SOO MUCH SIR.

@DIYBuilder Жыл бұрын

Congrats

@fatimazahraettalhy6882 Жыл бұрын

@@DIYBuilder can you send me the code please

@monsea.b1926 3 ай бұрын

can you past me the codigo, plis??? I cant downland and i wanna make my robot

@j.pbhatta3944 2 ай бұрын

Can you send me the code please

@jazzdudes5949 2 жыл бұрын

The ultrasonic sensor is working when the car is almost dashing, the project is good anyways overall and you did a great work.

@kanyewestlover91169 2 жыл бұрын

POV: You're here because of the research project your teacher gave you

@subscriberchallengewithvideoin 2 жыл бұрын

Please

@Mrsalabsab 2 жыл бұрын

bruhh same i have to make a robot

@mr.fggamer21 2 жыл бұрын

Yeap

@sadmaanbintarek5884 2 жыл бұрын

True

@GalacticNovaOverlord 2 жыл бұрын

I'm doing this for fun and practicing stuff for drones on a car first lol

@noahmcdarby5417 Жыл бұрын

I love how you skipped soldering the 6 prong power switch and went right to showing us how to screw a battery box to a piece of plastic. Real power move

@GGCMS71-4r-ky9nv 7 ай бұрын

You are very talented 😍 It is really amazing 😍

@kayongojohnsonbrian3902 4 жыл бұрын

i guy , thanks alot for the video .. for sure this is the best video i have watched so far on youtube about the Robot . man this is really wonderful ,... thanks alot

@DIYBuilder 4 жыл бұрын

Thanks :)

@shreyastiwari6350 3 жыл бұрын

@@DIYBuilder it's saying MOTOR12_1KHZ was not declared in this page Can you help?

@vritikagm5199 4 жыл бұрын

LOVE YOU BRO THANKS SO MUCHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!,REALLY YOU'RE THE MAN FROM DEEP INSIDE THE HEART.

@AdarshKumar-lf1kf 4 жыл бұрын

Hey can i use 2000mah battery

@shahariarefti1700 4 жыл бұрын

Hey plz help me

@juscapella6649 Жыл бұрын

Hello, can you please provide a diagram of some sort of the measurements between each hole on the wooden board/base so I know where to drill the holes? Thank you

@gagandeepsharma657 5 ай бұрын

Yes please do that 😔😔

@ppluviophileee_ Жыл бұрын

Bro, thanks. I have competition this sunday but i didn’t know about robotics lol… my teachers put me and she said she trust me that i can do this, but idk this things and- Wish me luck y’all. 2 more days left :( nervous

@tensoescalar1 3 жыл бұрын

This is an excellent proyect , thank you very much and greetings from México

@yogaming4314 3 жыл бұрын

it is project

@jayakumar5029 4 жыл бұрын

Amazing work bro, 😎

@meharfatima9558 7 ай бұрын

The detailing is perfect

@user-sc2gt6zf5u 7 ай бұрын

You did a great job. It is really amazing and very helpful. It is really a great informative video

@DIYBuilder 7 ай бұрын

Glad you liked it

@sujithk6983 5 жыл бұрын

Super. very clear and inspiring

@nadanor1234 4 жыл бұрын

Cute.. this project can be used in automatic floor cleaners making factories 😊

@sumairamazhar2761 8 ай бұрын

Awesome project! I just completed mine. 💕💕💕

@shax2338 5 ай бұрын

Hello 👋 Where did you get a code? Could you share it, please?

@user-xl9vk3ij8o 8 ай бұрын

Awesome project I just completed mine ❤❤❤❤❤

@JBM_95 3 жыл бұрын

Project finished few minutes ago and it works perfectly ! Thanks very much ! :)

@DIYBuilder 3 жыл бұрын

Great!

@milon712 2 жыл бұрын

How much money need??? This project?

@ManishPandey-ks3gu 2 жыл бұрын

can you give me code bro

@usmanarshadjamil3649 2 жыл бұрын

@@DIYBuilder can u give me the size of this sheet

@yourmusichere3468 2 жыл бұрын

Please tell me how to install the switch

@harshbhoite8772 4 жыл бұрын

@DIY Builder In circuit diagram, there is given 9v battery. Can we use 9v to motor shield?

@prernasinghal7651 6 ай бұрын

Thank you so much for helping us make this project

@kashafnoor2244 8 ай бұрын

Wow amazing work bro👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@normanburke2950 3 жыл бұрын

This is a very clear cut demonstration / program man, well done I had no problems with this but once I loaded my libraries, I tried to import them which I shouldn't have done. the code works as clearly as the video demonstrates! (Maybe state they need to charge their 18650 batteries)

@sivagangster 2 жыл бұрын

How to load libraries. Is it necessary to upload? Or Arduino code is enough? Pls reply

@normanburke2950 2 жыл бұрын

@@sivagangster I loaded them, and that is all you have to do. Then I ran it and it worked just fine

@ahmadhussainwebshare1001 2 жыл бұрын

hey how are you doing, pls help me from where can I find code

@normanburke2950 2 жыл бұрын

@@ahmadhussainwebshare1001 It's in the description

@AKElectroTech 2 жыл бұрын

kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@mohammadjaberuddin1909 5 жыл бұрын

A perfect tutorial.♥

@AamirSial-nw8ci 8 ай бұрын

I Appreciate Your Hard Work

@viboeditsz2477 Жыл бұрын

is there an alternative for the sensor stand??? love your videos love from India :)

@LuizCamposTutoriais 4 жыл бұрын

I really liked this project, it is much cheaper and beautiful.

@AKElectroTech 2 жыл бұрын

kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@Shubhamgaming1122 Жыл бұрын

Is it cheaper

@GagandeepSingh-dc9ke 4 жыл бұрын

DIY builder I really appreciate you you answer my all the questions I love your videos you are best maker hope you reach 10,000,000 subscribers amazing

@DIYBuilder 4 жыл бұрын

Thanks bro. Keep supporting

@GagandeepSingh-dc9ke 4 жыл бұрын

Sure

@amartechs9267 3 жыл бұрын

@@DIYBuilder Bro can i use normal duracell AA battery instead of 18650 battery?

@vickykhan1752 8 ай бұрын

Very good explained. Thanks bro :)

@SaqibRehman-vt8zh 7 ай бұрын

This is very good. Fantastic 😍

@noahmcdarby5417 Жыл бұрын

Awesome project! I just completed mine. 👍

@ramyanandhinia-z7053 Жыл бұрын

Please reply coding

@shaikfiroz7873 Жыл бұрын

send the code broh

@fatimazahraettalhy6882 Жыл бұрын

Send me the code plz

@vaishnavk953 3 жыл бұрын

Thank you for the video,I tried it and it works perfectly!

@DIYBuilder 3 жыл бұрын

Great to hear!

@manishaher5350 3 жыл бұрын

@@DIYBuilder hello, I have been trying to do but failed can you help me ? My number is 9819836665. A quick call would be appreciated

@rackctsz206 3 жыл бұрын

What program is that?

@varunartcraftsciencefunlea5171 3 жыл бұрын

Please tell software audino in computer

@_MAHALAKSHMIG 2 жыл бұрын

how to get program bro..

@samrapper7864 8 ай бұрын

Great and hard work always pays well

@user-pm1wr6hq8u 8 ай бұрын

Awesome project ! I just completed mine.❤❤❤❤❤

@IbrahimAlbaloshi-je4ip 8 ай бұрын

Wow❤

@namerre 4 жыл бұрын

I have built this car too, so much fun! Everything works fine, thank you for this amazing tutorial! Thumbs up! 👍👍👍

@DIYBuilder 4 жыл бұрын

Great

@shajaratulyakinmihad1889 4 жыл бұрын

Does the code worked correctly??

@namerre 4 жыл бұрын

@@shajaratulyakinmihad1889 Yes, perfectly worked! :)

@jyotikandpal5678 4 жыл бұрын

@naMerre how to exactly start this car...I mean I have purchased all the things and I m all set to build it up but I m a little confused in smthing...after making all this how will it start...there's nothing mentioned about that in the vedio about how to start it..?? Pls help

@namerre 4 жыл бұрын

@@jyotikandpal5678 I have uploaded a detailed video about the build. Please check: kzfaq.info/get/bejne/bqd3gcuJx5zOZXU.html I hope it helps! :)

@er.mohammadadil8423 4 жыл бұрын

Thanks for full link of product and code in discreption

@beastgod10 5 ай бұрын

thanks another chanellers are cheating you are the man who less from lying

@khalidmuhammad4712 8 ай бұрын

Looks so good 👍

@SonidosMuertos 5 жыл бұрын

Good, The perfect tutorial

@Dr_Hitesh_NLP_Master_Trainer 5 жыл бұрын

Very Nice, Interesting project. The most professional car I've ever seen. And First KZfaqr Ever who gives response very nicely and fast. 👍

@DIYBuilder 5 жыл бұрын

Thank you so much sir for watching this and i am so glad that you liked my video 😊

@saleemranjhani9443 8 ай бұрын

Awesome project! I just completed mine

@PramodSoni-tl4eg 7 ай бұрын

Bhai ye kaise chale ga

@sudharsonsk1159 4 жыл бұрын

Wow.. it's really nice ...It's working.... Thank you so much....

@renumishra2290 4 жыл бұрын

Where do you get codes

@samundeeshwarianandhan9057 3 жыл бұрын

bro please send the code

@vaibhav.m1707 3 жыл бұрын

Bro the code is perfect and it works perfectly . Thank u

@DIYBuilder 3 жыл бұрын

Welcome 👍

@Prashant-br4hl 3 жыл бұрын

@@DIYBuilder sir where can I buy the remote u used in this project to control this car?

@samundeeshwarianandhan9057 3 жыл бұрын

bro can u please send the code

@umitdemir2873 Жыл бұрын

Simply : RESPECT! 👍

@tariareese9546 5 ай бұрын

Can you please tell me how you added those additional needles to the driver shield where you were able to connect the sensor? you dont show this in the video :(

@rawankazma3929 5 жыл бұрын

hey, first of all thanks for sharing the video. and I'd really appreciate it if you answered my question. I did every connection right but the servo is only turning once when I upload it. any clue?

@trongnhan6536 4 жыл бұрын

AMAZING, I WANT ONE

@ajaykiran6 3 жыл бұрын

rajath rs 😂

@syedashfaquddin2941 5 ай бұрын

Hi I have one doubt when we connect external Power to motor driver shield the yellow jumber should be removed or kept as it is???????

@SHAHIDKhan-bp5nz 8 ай бұрын

This is a very clear cut demonstration / program man, well done I had no problems with this but once I loaded my libraries, I tried to import them which I shouldn't have done. the code

@bhosaleprathamesh4557 5 жыл бұрын

Thanks for this projects it worked i made this

@Tirthbhati2122 5 жыл бұрын

Hi prathathamesh can u tell me how did u make

@tanmay2826 4 жыл бұрын

kitna paisa laga

@harshsparikh 5 жыл бұрын

The perfect tutorial

@DIYBuilder 5 жыл бұрын

Thanks bro 😊

@AmanSingh-ez9vm 4 жыл бұрын

@@DIYBuilder Need a help .. whether to use NODE MCU or Arduino Uno for making an MINE SURVEILLANCE BOT which consist of Gas sensors , Temp Sensor & a camera working at wi-fi .. Please it's urgent

@praneethkoushik1996 3 жыл бұрын

@DIY Builder Amazing bro super work👍♥️Die hard fan broo💪

@vadeanualinflorin4108 2 жыл бұрын

@@DIYBuilder Mister, actually your batteries could support 4 DC motor and Arduino Board????

@gabrielcanche7486 6 ай бұрын

Me acabas de salvar tengo que entregar un proyecto y tu me diste una idea estupenda

@Broki_0 6 ай бұрын

Finnaly made it thanks

@cjgamer2737 Жыл бұрын

If you are in seminar , and your teacher gave you this project to your group, and when your teacher ask what you can improve in it , say " This tyres should have torque at an angle 18°,so that it can change its direction easily" You will be appreciated 👍👍😉😉

@mrinalkantisarkar1222 2 жыл бұрын

@DIY Builder I appreciate your hard work but just a little note - Actually the code that you have used in your build was right but the code in the discription has a MISTAKE - in the line where it is written [If distance R < distance L] should be distance R > distance L as in the next line it is written turn right so as a result due to this mistake the car is turning right when distance L or (Distance Left) is greater it should be the opposite because the car need to avoid the obstacle not to get towards the obstacle so please rectify this Anyways your videos are amazing 🙂, Thanks

@salmaj7607 2 жыл бұрын

Is that the only mistake there?

@salmaj7607 2 жыл бұрын

I mean If I use the code in description with changing that detail you mentioned I'll have no problems right?

@mrinalkantisarkar1222 2 жыл бұрын

@@salmaj7607 Yes you will have no problems, by the way I don't know whether @DIY Builder has changed the description code or not but if he hasn't changed you can follow my steps given above and change the code, actually the code is not so difficult just make sure that whatever changes you are doing - the car should avoid the obstacle not go towards it, just read the code once it will make you clear and, Thanks for your comment

@senoritaff2680 2 жыл бұрын

Hey can u help me I Insert the code on Arduino board but I didn't do anything thing what's the problem is there can u tell me???

@mrinalkantisarkar1222 2 жыл бұрын

@@senoritaff2680 Yes you have to change the line in the code which I have mentioned above, just go through the whole code once you will find the line and delete the part which I mentioned and rewrite the line according to my comment and save the code then connect your arduino to your device and re-upload the code and BOOM you are done, if you want to know what's the problem with the original code I have explained it in brief in my comment you can also check other's comments where I have explained them why the original code is incorrect and so on.If you still have any doubts feel free to contact me. Have a nice day ☺️

@asadjamil1049 8 ай бұрын

Nicely done ❤

@debjitdasee 3 ай бұрын

It still works ❤❤ I just made it for my collage project

@durgasoni2754 2 ай бұрын

can you send me the program of this project. u made for your clg na so plz help me in that. send me the full program of this project

@debjitdasee 2 ай бұрын

@@durgasoni2754 just copy the same code as it is in video it will work no ther modification required to work

@durgasoni2754 2 ай бұрын

ok I'll try again

@arnoldsinaga500 5 жыл бұрын

Good project...👍

@user-xb7cw9so5i 3 жыл бұрын

太棒了！It's amazing！

@Dahrijavedofficial 8 ай бұрын

Great work 👍

@Mustafaasif11 8 ай бұрын

Amazing bro,,, we will have opportunity to do so ,,

@fabiodesallespereira7977 5 жыл бұрын

Great! Congratulations for Project.

@zainulabidin3033 4 жыл бұрын

You made my semester project easy, thankyou DiY project ❤️

@zainulabidin3033 4 жыл бұрын

Its working perfectly 👍

@DIYBuilder 4 жыл бұрын

Great bro

@studylives1617 4 жыл бұрын

@@DIYBuilder Can i run it with 12volts battery

@rushalipandit7712 2 жыл бұрын

@@zainulabidin3033 how much did it cost u

@DIY-693 11 ай бұрын

Well done, I'll try it.

@divyasaravanan9154 7 ай бұрын

Can you guys or the video maker tell what kind of a wire you are putting in the gear motor I want to make this

@vritikagm5199 4 жыл бұрын

its working bro!!!!!,its because of your video and your hardwork love you bro (

@Shyamshyam-fo8wv 4 жыл бұрын

Vritika GM ....bro u will tried this project

@siddharthasingh9570 3 жыл бұрын

It is working perfectly thank you 😃

@DIYBuilder 3 жыл бұрын

Enjoy

@MultiTechChauhan 3 жыл бұрын

@@DIYBuilder bro L298N module ko maine 5 volt ke charger se power diya to on nhi hua minimum voltage kitna chahiye please reply

@haruchi8196 3 жыл бұрын

hello,, can you help me? below is the error everytime i upload it.... help please Arduino: 1.8.12 (Windows 10), Board: "Arduino Uno" Sketch uses 3908 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 87 bytes (4%) of dynamic memory, leaving 1961 bytes for local variables. Maximum is 2048 bytes. An error occurred while uploading the sketch This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

@siddharthasingh9570 3 жыл бұрын

@haru haru have you selected the correct board ?

@haruchi8196 3 жыл бұрын

@@siddharthasingh9570 yes... Huhu please help me

@shokat.aliali135 8 ай бұрын

Excited

@cubeerboytemple8173 Жыл бұрын

thanks to you i tried this and working all fine

@DIYBuilder Жыл бұрын

Nice work bro

@prettek 4 жыл бұрын

Hi, in the parts list there are two 3.6 volts batteries in parallel, but in the Circuit Diagram it says to use a 9V battery. Are both options safe?

@connorsullivan5996 4 жыл бұрын

A little late, but yes it is safe. The arduino will convert either to 5v as long as the input as below 20v safely, I believe

@tuffstein9161 Жыл бұрын

@@connorsullivan5996 doesn't arduino uno need 9v to work?

@clickenpie 4 жыл бұрын

will a 1:48 reduction ratio for the motors work as well? thx

@nowadays1638 7 ай бұрын

Nice job ❤️ 😍

@user-jn7cz4fm9k 3 ай бұрын

It's so good and exciting 😮

@pharaohboy8657 3 жыл бұрын

I'm going to do that with my own code but there is one thing that I'm afraid of it's that when you move the ultrusonic with your hands it reads -334 cm or 0.5 cm even if it's so far away so does it do that even with the servo movements?

@AKElectroTech 2 жыл бұрын

kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@oggy_xd4362 3 жыл бұрын

The perfect one

@schwoedie 9 ай бұрын

Hi! Can you use a regular AA/AAA battery with their respective battery holders instead of a 18650 battery? Thanks

@DIYBuilder 9 ай бұрын

No you can't

@schwoedie 9 ай бұрын

18560 batteries and the holder are not available on the website in the description. I need the materials a little urgently since I have a school project. What do you suggest?@@DIYBuilder

@SanowarSheikh-kn6jy 8 ай бұрын

Keep it up👍🧸🌺

@jadevibex2463 5 жыл бұрын

Amazing work 😍 Can I ask? Is it okay to use L298N for the motor drive shield?

@DIYBuilder 5 жыл бұрын

Yes you can but if you use L298N then you need to modify the code.

@stormgaming4287 4 жыл бұрын

Can you give a modified code

@AKElectroTech 2 жыл бұрын

kzfaq.info/get/bejne/j56gmrqjzsuwhKM.html

@shivanshverma2972 3 жыл бұрын

i loved it bro

@DIYBuilder 3 жыл бұрын

thanks bro

@vrboyz1903 Жыл бұрын

High quality money DIY 👏

@shiwangphuyal528 Жыл бұрын

hello the motor driver u showed before and used before is different?

@mithleshgoyal2966 5 жыл бұрын

Pls make a video on a robot car which is obstacle avoidance and Bluetooth controlled ..... Pls guies like it if u want that video👇👇👇

@karamkassem9821 5 жыл бұрын

@@syedsalmannadeem 😂😂😂😂

@savandikodithuwakku1981 5 жыл бұрын

Useful

@yashaggarwal3948 4 жыл бұрын

What's the use of obstacle avoidance if it is Bluetooth controlled 😂😂😂

@mohaff7128 4 жыл бұрын

j'aime page "tolati 3D"

@Viewatindia 4 жыл бұрын

@@yashaggarwal3948 yes u true

@scenesticlad3042 2 жыл бұрын

Hello man, first of all a very nice guide for begineers, I want to know that is this automatic? and what if I want to add more sensors to make a prototype for a parking system for a car?

@imanebertal9985 Жыл бұрын

hi ,did u made it ?

@scenesticlad3042 Жыл бұрын

@@imanebertal9985 no

@imanebertal9985 Жыл бұрын

Do you have an idea about this feild I'm new here and I'm about to do it as my graduation project it will an honor to receive help from you, if yes Ill give my what's up contact

@misbahrazzak3014 7 ай бұрын

Great work

@arunaaruna5953 Жыл бұрын

Thankyou sir you helped me a lot

@GagandeepSingh-dc9ke 4 жыл бұрын

Really that's amazing

@richagupta3463 3 жыл бұрын

Ye dekh kar fayda kaya hai

@richagupta3463 3 жыл бұрын

Saman laao lagao bas bangaya

@richagupta3463 3 жыл бұрын

Hame ye karna chahiye ki motor banao phir lagao

@richagupta3463 3 жыл бұрын

Apne parts banao phir robot banao

@lalithasingh8591 3 жыл бұрын

Darey

@e_dum_ 4 жыл бұрын

Which screws are u using

@notic0al899 5 жыл бұрын

I love it! Me and my dad will attempt to make it, but I would like to know, can you attach more sensors, if so how?

@charithwijesundara 5 жыл бұрын

You add encoders for wheels, speed control

@nitinmalhotra1189 5 жыл бұрын

Go for Arduino mega AT2560 instead of UNO

@adizivojevic8635 4 жыл бұрын

@@nitinmalhotra1189 OVERKILL

@dipinadhikari9549 3 жыл бұрын

Sir you can make it. You can watch the video for a quick guide. kzfaq.info/get/bejne/ga6GpaZ30NWbhKM.html

@mohammedriyan380 5 жыл бұрын

Where to connect the wires from ultra sonic sensor to motor driver ..there are no pins near +5 and gnd

@lingappamoolya1591 5 жыл бұрын

Yah plz do reply

@manafasif5007 5 жыл бұрын

next to power and ground theres a row of pins that are labeled 0-5. Those are A0-A5. Just plug it in there

@anupamasharma6121 3 жыл бұрын

Bro he has given a circuit diagram in the description. You can check all the wirings there.

@user-jh9cx4cm7o 8 ай бұрын

Nice work 👍