how to make a lenticular print

Рет қаралды 978

Ай бұрын

I hope this is a helpful tutorial on your lenticular journey! I’ve said this 457 times now, but I still don't know what I'm doing so please check out the additional resources to help fill in the gaps 😬
I’ll try to answer questions in the comments (if I know the answer) but feel free to help each other out as well ❤️
Also thanks to 3DMasterkit for the software for this project, couldn't have made this tutorial without it!
The supplies
• Epson XP-7100 amzn.to/3TZxUWC
• 8.5x11in photo paper amzn.to/3xDqy3O
• 50 lpi lens with adhesive (5x7in landscape orientation) amzn.to/3JjwGAw
• Masking tape amzn.to/3xA18ny
• Microfiber cloth amzn.to/3VUTHkQ
• Box cutter amzn.to/3vOnGR0
• Laminator (discontinued but same brand) amzn.to/4b0tLJ6
• Squeegee (I don't know where I got mine but something like this) amzn.to/3W2dzTr
• Guillotine cutter amzn.to/3W0G4Rd
• Corner tool amzn.to/4b3H2AB
• Downloadable images sambeige.gumroad.com/
• 3DMasterkit software triaxes.com/3dmasterkit/
This is the 40 lpi sheet that I mentioned using for the harder project
• 40 lpi lens with adhesive from VueThru shorturl.at/CKV04
Additional resources to correct my errors
• Everything from Michael Brown's channel / @michaelbrownartist
• triaxes.com/articles/3d-lenti...
• triaxes.com/articles/2d-3d-co...
• • How to make lenticular...
Chapters
0:00 intro
1:07 the supplies
4:32 the pitch test
9:42 interlacing
13:25 final assembly

Пікірлер: 20

@purveshdev5218 13 күн бұрын

Man thia is really helpful as you are the only guy on whole youtube with this tutorial

@sam-beige2 4 күн бұрын

Really appreciate it 😄

@pietroscalianti Ай бұрын

hi, since your first video I decided to try it, and a useful tip for those who are also going to try it, the laser printer produces a sharper print making it easier to align the print with the lenses

@thereturnofX420 Ай бұрын

can you make tutorial lol

@PilarBada Ай бұрын

Coming from the other channel, instant subscribe!! I'm the crazy lady trying to make fake windows.

@sam-beige2 Ай бұрын

😂 haha I love it!! Hope the tutorial is useful as you make that project. There’s already a few things I wish I could have said more clearly, but feel free to reach out if you get stuck!

@codepunk4979 Ай бұрын

Thank you!

@pop-upcardmaker Ай бұрын

Hi Sam, thank you so much for this great tutorial video. I really appreciate the work you've put into it. I am trying to learn lenticular printing, and I give up (semi permanently, lol) at least once a week. Thanks also for making available the artwork. It is very helpful to use these for trying out the process. Can I ask if the advanced version worked on 50 lpi? And why you decided to print it on 40 lpi lense - what were the advantage and disadvantages between the lenses? Many thanks 😊

@sam-beige2 Ай бұрын

You're welcome, it's definitely a tough project so hopefully it helps some people get through a few of the challenges. I had the same experience with my same video of giving up a lot, but I'm sure you'll be able to do it! Great questions! What printer are you using? I hope I didn't completely discourage anyone from trying the advanced version, it's definitely usable in a lot of setups, including 50 lpi. I just didn't feel as confident in the final result, and how untested it was. I did do a couple 50 lpi prints that I don't think I ever showed, but I think I deleted 2/3rds of the frames (so that the images go 1,4,7,10...etc), that way you end up with 12 frames, just like the mustang, but a similar car animation. I didn't mention this in the tutorial (there was a lot I ended up editing out so that it wasn't 2 hours long haha) but in terms of advantages, the 50 lpi has a slightly smaller viewing angle than the 40 lpi. That's why I ended up choosing the 40 lpi for the N-Vision design, but in the end, I felt like it didn't make a massive difference, and if I could do it over again, I would probably just do everything with the 50 lpi. Also even though I used an Epson for this whole project, an HP would work really well with all of these numbers (50 lpi, and either 12 or 36 frames)

@pop-upcardmaker Ай бұрын

Many thanks for the detailed response, Sam. I use an Epson EcoTank printer, tired your templates on both 50 and 75 lpi lenses, and was happy with results. Once again your tutorial was excellent and so well put together. Thank you.

@sam-beige2 Ай бұрын

@pop-upcardmaker That makes me so happy to hear!!! That’s awesome that you made the 75lpi work as well, I haven’t tried that one! Which lens did you like the look of better?

@pop-upcardmaker Ай бұрын

@@sam-beige250 lpi worked the best, 75 lpi looks clearer but the movement wasn't great as it cuts off. The blue car on 50 lpi was nice. The advance version only worked when I reduced the frames using 50 lpi.

@moshe3072 20 күн бұрын

i know how to make it but people tont see what i see. i see 3d they see not clear image

@user-ry8es3qr9j Ай бұрын

good but how do you do interlacing for the top of the mustang.

@sloppycee Ай бұрын

How did you figure out the optimal camera angles in blender?

@sam-beige2 Ай бұрын

It was some trial and error, but they’re far from optimal. I think I started with the viewing angle of the lens and made a few adjustments from there

@CAMER_21 Ай бұрын

kzfaq.infotRxj11TlweQ?si=IBY1-AolF5I3SBFA how can we make something like this i know this part is made on cnc machine ....i am programmer ....i can do programming ....but i needed 3d model....i don't have 3d model.... if using 3d software artcam or solidwork or any 3d software can anyone make 3d of this part???....i have machine i know how to program but i need 3d model file....