How to make a Lightsaber ( for Star Wars Day )

How to make a Lightsaber ( for Star Wars Day ) | I Like To Make Stuff

Рет қаралды 2,523,915

7 жыл бұрын

It's Star Wars Day (May 4) so check out how I made a lightsaber!
I'm a huge Star Wars nerd, and so to "celebrate" May 4th, I buckled down and completed my lightsaber project. This project has been in progress for almost 2 years (on and off) and it was finally time to finish it up. It uses a Teensy microcontroller and a prop shield to play sounds, handle motion detection and drive a LOT of LEDs to create the blade. The lights animate up and down with button presses and the sounds react to on, off and swinging the saber.
My code is available from
github.com/iliketomakestuff/i...
Some other saber projects I recently found:
fredrik.hubbe.net/lightsaber/
github.com/leethomason/OpenSaber
TOOLS LIST:
(some are better than the versions I own)
amzn.to/2oBqaOF - Polycarbonate tube
amzn.to/2J9K7qi - LED strip (x2)
amzn.to/2oNNiVv - Teensy 3.2
amzn.to/2qkanAg - Prop Shield
amzn.to/2qkfsJ4 - Battery Holder
amzn.to/2oBfnnz - 4 NiHm rechargeable batteries
amzn.to/2p8tmQA - charger
amzn.to/2qktvyg - 1.5" speaker (only available in 4 pack)
amzn.to/2pr8wfG - Micro Buttons
amzn.to/2oO0cTl - Rocker Switch
amzn.to/2pr9AR3 - 9v battery connector
www.matterhackers.com/store/3d... - MatterHackers PRO PLA
www.matterhackers.com/store/3d... - MatterHackers PLA (clear)
amzn.to/2akFubx - Orbital Sander
amzn.to/2akGcWk - Classic steel ruler (cork backed)
amzn.to/2e7tvB8 - Box Cutters (for eva foam)
amzn.to/2aXHswm - Spray lacquer
amzn.to/2ay9XRX - CA Glue (medium)
amzn.to/2ay9T4v - CA Activator
amzn.to/2axGFpt - Ultimaker 2 Extended 3D printer
amzn.to/2anW7yq - Wire
amzn.to/2awMqgO - jumpers (Male to Female)
amzn.to/2aCLdp7 - Soldering iron
amzn.to/2axPywo - Third hand kit
amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones)
amzn.to/2axQ4dP - Thin solder
amzn.to/2aCLgBi - Anti static mat
amzn.to/2aXc3dy - Fiskars cutting mat
www.matterhackers.com/store/pr... - Ultimaker 3
prusa3d.com - Original Prusa i3 MK 2
amzn.to/2jHcIFw - Digital Calipers
amzn.to/2al6w2q - Heat Gun
amzn.to/2aXJfRX - Hot glue gun
amzn.to/2ayihkF - Quikclot clotting sponge
amzn.to/2aLCCCN - First aid kit
amzn.to/2aovz06 - Respirator
amzn.to/2aW3nHn - Filters
amzn.to/2aY182W - Eye protection
amzn.to/2axUZ0X - Ear protection
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
www.iliketomakestuff.com/patreon
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
How to make a Lightsaber ( for Star Wars Day ) | I Like To Make Stuff
• How to make a Lightsab...
I Like To Make Stuff
/ iliketomakestuff

Пікірлер: 3 200

@Iliketomakestuff 7 жыл бұрын

I've been seeing lots of comments like "oh, I could do it too if I had an expensive 3d printer". There are other options. Not all 3d printers are expensive, but If you wanted it printed you could use a service like 3dhubs or shapeways or even find a local makerspace. Also, it's basically a tube so you could try pvc pipe as a base, then add details on top. I would challenge you to use what you have to make stuff you want. You can do it!!

@LutherBuilds 7 жыл бұрын

I Like To Make Stuff I couldn't agree with you more Bob! Use what you can to build one. The only thing that limits us is our minds.

@gasansol9086 7 жыл бұрын

Joshua Luther and the materials on earth and tech

@craftstation7723 7 жыл бұрын

I Like To Make Stuff I just got a $160 diy printer from gearbest its support to arrive by the ninth. but it is shipping from china

@wyley87 7 жыл бұрын

I Like To Make Stuff They are just haters that are jealous.: )

@TheWaving1 7 жыл бұрын

I Like To Make Stuff 1337 minutes and 69 likes on this comment illuminati confirmed

@alfiegokui1019 4 жыл бұрын

11:44 *holds lightsaber incorrectly* Me: wait that’s illegal

@vigilant3263 4 жыл бұрын

him: holds lightsaber by the blade me: wait thats illegal

@gbrielmd 4 жыл бұрын

Guys what i have a question, what if someone with a vibranium arm holds a lightsaber by the blade?

@pedrogodoy8105 4 жыл бұрын

@@gbrielmd i think vibrannium would be one of the many material that can resist lightsabers, like cortosis or mandalorian steel.

@gbrielmd 4 жыл бұрын

@@pedrogodoy8105 yeah i think like that too, i was just curious to know other peoples opinion about this

@Nimbusart2023 4 жыл бұрын

*fights with the blade as the handle*

@gamemakero1998 7 жыл бұрын

11:20 That laugh it's the sound of a childhood dream coming true

@Pedro_Sanglard 7 жыл бұрын

It truly is man hahahaha

@lemonair4507 7 жыл бұрын

gamemakero1998 yup your right

@CKTDanny 7 жыл бұрын

That reaction put a smile on my face :)

@braydeereiske9929 5 жыл бұрын

gamemakero1998 iiii

@kitsinthewebs222 4 жыл бұрын

No, it's actually this one: 11:14

@anthonyreed3682 4 жыл бұрын

When did Mysterio start doing lightsaber tutorials?

@ttekirinkaari3612 4 жыл бұрын

Lol

@nanashi_0731 4 жыл бұрын

Oof

@ricardopuente7192 4 жыл бұрын

look a loverfella on youtube when did he start playing minecraft

@f1re_memes697 4 жыл бұрын

Mysterrio back again with his tricks

@berzerkisnotaqt1250 4 жыл бұрын

Well Jake Glynehaal had to have more than one job

@makotoplush9776 4 жыл бұрын

"How to make a lightsaber" Me before video: Yay I can finally make my own lightsaber Me after video: How the hell am I gonna do this

@ninjastarfish7404 4 жыл бұрын

Same😂

@djskullboy2871 4 жыл бұрын

Do what I did and start saving money

@JonahStubbs 4 жыл бұрын

Go to Savis Workshop in Disney Land/World

@--Emma--9173 4 жыл бұрын

Same here

@willmarsh7567 4 жыл бұрын

yep off to amazon

@papabuck3734 7 жыл бұрын

I see you have constructed a new lightsaber... your skills are complete

@orion2223 4 жыл бұрын

Void Sz as the emperor has forseen

@VCGConstruction 7 жыл бұрын

Your videos make me happy

@Iliketomakestuff 7 жыл бұрын

That is truly fantastic to hear :) Thank you!

@VCGConstruction 7 жыл бұрын

May the 4th be with you!

@jxmint4458 7 жыл бұрын

VCG Construction nice pun

@RivertownWoodcraft 7 жыл бұрын

indeed.

@gregmasterson-verified-8959 7 жыл бұрын

+VCG Construction Aren't weapons awesome? ;)

@juanchocorleone 6 жыл бұрын

I see you have constructed a new lightsaber. Your skills are complete. Indeed you are powerful, as the KZfaq's algorithm has foreseen.

@bellbm55 4 жыл бұрын

Juancho Corleone wow u did great making this comment must have been really hard COPYING Anthony Tripodi

@enemyguard5740 4 жыл бұрын

Bruce Bell u did a great job being a sith in this comment

@TashaVanHuss 4 жыл бұрын

AHAHA

@acharple 4 жыл бұрын

Bruce Bell I mean, I like to make stuff doesn’t mind about it.

@maddiemeck8742 4 жыл бұрын

When he’s even got the obi-wan look

@thepak1912 4 жыл бұрын

Lmao

@AceYT69 3 жыл бұрын

He's more of a Mysterio

@FrozenJedi38 3 жыл бұрын

@@AceYT69 or the Infinity War Captain America.

@danthebunnie_origins1146 2 жыл бұрын

Hello there,

@frankmakes 7 жыл бұрын

impressive, most impressive

@-leejamesxo-1964 6 жыл бұрын

frank howarth that's my line 💀💀

@TuttaltroChe_quello 6 жыл бұрын

Xd hellooooo

@TuttaltroChe_quello 6 жыл бұрын

@_-_-_L_-_-_ 5 жыл бұрын

But you are not a jedi yet

@mrmrflamingo6601 4 жыл бұрын

@@-leejamesxo-1964 as Mando once said "that's my line!"

@d73w80 7 жыл бұрын

Is it just me, or does he kinda look like a Jedi

@Iliketomakestuff 7 жыл бұрын

I hope it's not just you ;)

@henriquesilva966 7 жыл бұрын

559Drew he does not look like a Jedi He looks like a Jedi Master!

@shermanlo1880 6 жыл бұрын

luke / obiwan hybrid

@finnishmetalfreak 6 жыл бұрын

He kinda looks like Kyle Katarn

@daddydojang 6 жыл бұрын

scruffy looking nerf herder.

@Kyurnmakes 6 жыл бұрын

I LOVE the pure joy when you first turn it on. That, in itself, is as inspiring as the build. :) Thank you for sharing.

@thorhaveron 6 жыл бұрын

10:53 break it off with a little bit of FORCE!

@-leejamesxo-1964 6 жыл бұрын

thor CoolGuy yes the dark side of the force

@lejla8452 6 жыл бұрын

thor CoolGuy i died

@tomstartup889 7 жыл бұрын

What I like about your attitude is that you recognise any faults or issues with whatever you're making and you acknowledge any possible solutions

@fara.r.8181 5 жыл бұрын

The real ethic of a scientist

@abireyes760 5 жыл бұрын

Hey can you also make lego with the 3d printer

@abireyes760 5 жыл бұрын

Sorry rong person

@FatBikerVaibhav 7 жыл бұрын

is it legal? wont it cut limbs off a human?

@somiyabhardwaj4150 7 жыл бұрын

Of cource if he puts a plasma in next version

@han07013 7 жыл бұрын

Fat Biker Vaibhav it will BEWARE!

@johnreitz7792 7 жыл бұрын

He will make it legal

@NarratedByAdam 7 жыл бұрын

Don't worry...It wont unless you have the high ground.

@Yonatan24 7 жыл бұрын

Not if you paint it green and ground the PVC!

@cyondestiny 5 жыл бұрын

Well Done My Young Apprentice Your Training is Now Complete

@dontknowwhattoputhereyesr3625 4 жыл бұрын

Are you in the resistance or the order?

@isak6754 4 жыл бұрын

Don't eat my soul please

@yeetmcyeetson8822 4 жыл бұрын

@@dontknowwhattoputhereyesr3625 old republic *DARTH NIHILUS was apprentice of Darth Treya and was known as **_Lord of hunger_*

@envrnmntlsm 4 жыл бұрын

revan is better

@AJ-jj9fc 6 жыл бұрын

The on camera reaction to firing it was was totally awesome. This project was amazing and I want to build a lightsaber now.

@IagoPereira 7 жыл бұрын

Man you looked so happy with the finished product ahahah great!

@Iliketomakestuff 7 жыл бұрын

It really made my day :)

@TheTartanFox 7 жыл бұрын

I Like To Make Stuff could you do Han Solos blaster pkease

@RedSoul001 7 жыл бұрын

I really like seeing your reaction to it too. You should do more first impressions like that on camera to builds like this one. For builds that could work or fail you know? I would really like to see that.

@alcenjoyer 7 жыл бұрын

OK.... I don't know if i'm color blind, but I swear when he was checking the colors and he said ''red'' i completely saw orange

@Iliketomakestuff 7 жыл бұрын

+clorox bleach yeah the red didn't translate through the camera that well. Something to do with the color grading we did I imagine.

@Crown987 5 жыл бұрын

Hey thats pretty cool i wish i could do stuff like this, you are so creative and talented so keep up the good work!!! P.s. I know this is late but i couldent resist

@supaMcnugget09 4 жыл бұрын

Same

@blueshappiness7069 4 жыл бұрын

ShararCion camera has colour correction

@AhsokaTanoTheWhite 4 жыл бұрын

believe me, you'd know long before watching a youtube video if you were colour blind. take it from me, as a little girl in school who got loads of comments and backlash when I coloured the ocean purple.

@SirCloud720 4 жыл бұрын

I really enjoyed this,the only thing I’d do differently is make the tip of the lightsaber rounded

@mrmrflamingo6601 4 жыл бұрын

In the prequels and I think the sequels, it's a bit more pointy then the OT

@chimbo2078 4 жыл бұрын

MrMrFlamingo yeah but it’s still not flat lol

@churronation6106 4 жыл бұрын

How did you-

@macncheesus6221 4 жыл бұрын

I’d just do that plus, have a more detailed hilt.

@danielgomez4317 6 жыл бұрын

Dude this reminds me when i was a kid, i mean i have always love to do things, and in my childhood i was so much crazy about making stuff, I used to make swords, guns, space ships, buildings, houses even cities, everything i wanted using only what i could find, I build my own lightsaber using aluminium paper, I did luke saber and i was so much obsessed with all the little details.

@farisrevalin2745 7 жыл бұрын

Obi-Wan still lives.

@pepijnkolber2735 6 жыл бұрын

No, he appeared as a forceghost in all 3 of The sequal movies

@daone1111 6 жыл бұрын

Faris Revalin I wish

@daone1111 6 жыл бұрын

Peppa Gaming true

@Dan-lu5qd 6 жыл бұрын

Peppa Gaming you dont get the joke do you?

@no-one2961 6 жыл бұрын

Peppa Gaming he means this dude looks like obi 1 and name is ben like obi 1

@Xaqaria 7 жыл бұрын

Awesome job. it's always fun seeing the excitement in people's eyes when they complete a long term project they're really into. Happy May the 4th!

@Iliketomakestuff 7 жыл бұрын

Thanks man!

@adimt257 4 жыл бұрын

Bob: “it’s a little messy” Reason: “I don’t know what I’m doing”

@bobjoe3234 3 жыл бұрын

hello

@galli0 6 жыл бұрын

11:18 for that glorious smile and laugh, pure joy!

@williamosman 7 жыл бұрын

Store the selected color in EEPROM, then load that memory at startup. EEPROM can store memory even when powered off.

@MrSmileymonkey 7 жыл бұрын

hi will can i have some salsa

@HardbrasH1 6 жыл бұрын

What a meeting!

@howaboutno2666 6 жыл бұрын

I was watching some school videos on twice the speed, and then clicked on this video, and I am shook. That beginning is WOW at 2x.

@bronwyngrundelingh-sandri-7837 5 жыл бұрын

My fave moment is the happy laugh when you switch it on when it's finished. Totally cool diy.

@peterbrownwastaken 7 жыл бұрын

The sounds take this project to 11. Super impressive Bob!

@Iliketomakestuff 7 жыл бұрын

:) Thanks Peter!

@CCross777 7 жыл бұрын

Peter Brown dang BOTH my favorite youtubers in one comment section! And great build! This was amazing!

@greensboroughcycles8653 7 жыл бұрын

Peter Brown hey Pete can you make this out of resin?

@ScottParkerCopestick 7 жыл бұрын

I think you should turn Bob a lightsaber handle to go with version 2 :-) Perhaps a little resin number full of midichlorians

@InstrucTube 7 жыл бұрын

Black resin with aluminum shavings again? Death handle!

@HowIDoIt 7 жыл бұрын

dont even need to watch it to give it the thumbs up immediately! May the 4th be with you Bob!

@Iliketomakestuff 7 жыл бұрын

Awesome, thanks! (But please watch it) :)

@DNHandcrafted 7 жыл бұрын

How I Do It yes!! I click the notification, hit the like button, then watch the video.

@HowIDoIt 7 жыл бұрын

I Like To Make Stuff of course multiple times as well :-)

@nozaman3025 6 жыл бұрын

Revenge of the 5th

@carlosanglas1462 6 жыл бұрын

Man, you're awesome! I loved your face when turning it on fully assembled for the first time, a dream come true. Congratulations on your great work and passion!

@Hanakooh 6 жыл бұрын

Looking back, I really saw the pure joy and excitement radiated all over your face when you finally succeeded in the project. Congrats and really nice job!

@gamergunk6148 7 жыл бұрын

May the 4th be with you.

@therandomchannelchilliepep7786 6 жыл бұрын

Johnnyboy2300 The revenge of the 5th has come

@lps._.seashell7672 6 жыл бұрын

Johnnyboy2300 U 2

@Xgvad 6 жыл бұрын

Nithe lthp

@maiahisula4585 7 жыл бұрын

I like how delighted he is when the saber finally worked

@Iliketomakestuff 7 жыл бұрын

@noahdarden597 4 жыл бұрын

Him: how to make a lightsaber Me: clicks on Also me: how the hell do I do this?!

@larrypilime5964 4 жыл бұрын

Wow! This was so awesome, dude! I even cheered when everything worked out, it all came together! Really love your vids, keep 'em coming!

@pobbrett3244 7 жыл бұрын

Hey man great project, small tip for you when going for a metallic spray finish the coat before should be a gloss black as it really adds to the shiny metallic finish 👍

@Iliketomakestuff 7 жыл бұрын

Good call!

@Geeksmithing 7 жыл бұрын

Best intro ever.

@Hubbmade 7 жыл бұрын

RIGHT?!? Nailed it!

@davestrain1762 7 жыл бұрын

I thought there was something wrong at first.... but it was so right! Haha great intro!

@cobenaut 3 жыл бұрын

nice job, watching this really makes you appreciate the work that goes into making high-end sabers on the market

@thatloganjackson 6 жыл бұрын

I like how when you make projects you make it all one video and not 3 different videos. Thanks for doing that.. :)

@grossstadthengst 7 жыл бұрын

a video on May 4 (that's 13:37 long) about making a light saber - how nerdy! ;-)

@Iliketomakestuff 7 жыл бұрын

I do what I can :)

@themorningwoodworker 7 жыл бұрын

Should have aimed for 11:38

@briannguyen6055 7 жыл бұрын

grossstadthengst it is nerdy but if you are gonna do some modeling then this is very cooler

@user-th8pr7no5p 7 жыл бұрын

I don't get the 1337 part...

@simon_far 7 жыл бұрын

if you don't get the 1337 part you must not be "elite" enough.

@miriamschoon2105 7 жыл бұрын

I seriously wish there was more than one thumbs-up to be given for this!

@suchlizna 7 жыл бұрын

Miriam Schoon m

@chuco1336 6 жыл бұрын

Miriam Schoon like this 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏

@DavidPlass 6 жыл бұрын

OK, this is now officially my favorite channel!

@RevNicholasJonsson 3 жыл бұрын

Well done young Jedi. The force is strong with you

@konstantin8417 7 жыл бұрын

'I'm not a pro at 3d-modelling.' No. Not at all. I mean, clearly.

@Iliketomakestuff 7 жыл бұрын

:) Seriously though, I pretty much bumble through it and do everything 2 or 3 times.

@WreckDiver99 7 жыл бұрын

OK...yet you can get something done. I can't do diddly squat with Fusion 360. I just don't get it. I've tried to use their tutorials, but it's like "well, since you're an expert at Solidworks you just need to know the differences". UGH. I have so many ideas in my head of things I want/need to build and I want plans...I'm better off getting my old drafting equipment out and scratching some lines right now.

@wmoecke 7 жыл бұрын

That's the learning process. ;-)

@Jaeger369 7 жыл бұрын

It really is a learning process. I've been at it for about a month and can tell you that it even people who get down routines can have issues, you just need to work through them and you'll get there.

@robingdwl 7 жыл бұрын

he is definitely not a pro! but as you can see he knows enough to get it done and thats all that matters. CAD is hard but you can work your way through if you have the patience. great Job, Bob!

@liamcarwithen5634 7 жыл бұрын

Your pure happiness after it lit up made my day

@shubhammakhija475 3 жыл бұрын

May the force be with you

@Kogasengaha_Hishoshi 6 жыл бұрын

The tractable and detractable lightsaber when it goes back in is Dope XD

@eqoya 7 жыл бұрын

May the 4th be with you

@renderforest9295 7 жыл бұрын

#imperial_march

@rapiddanger 7 жыл бұрын

I am one with the 4th and the 4th is with me

@layerbylayer9119 7 жыл бұрын

The joy on your face when that lit up! Made me so happy that you were happy! I have a hilt that I made last summer which has been just a decoration... until now. This video has for sure inspired me to fit it with all the electronics and make it look great! Probably the only thing I would add would be a quick disconnect between the blade and the hilt that way its easily portable and I can still have it as a decoration without the blade. Overall this was awesome and made my Star Wars day that much better!

@stephendevera4523 4 жыл бұрын

IN MY OPINION THIS IS THE BEST MAKING LIGHTSABER VIDEO

@nookingo 6 жыл бұрын

Loved it... Best project so far, and have been following you for more that a year.

@hugooliveira7247 7 жыл бұрын

BOB THE BUILDER , YES WE CAN

@valentinotoscano3944 7 жыл бұрын

x .BOSS. x hahahahahah xD

@a.h.u8837 7 жыл бұрын

x .BOSS. x Bob the maker, can't get sued for copyright

@shounda8017 6 жыл бұрын

x .BOSS. x BOB THE SUCKER NO WE CAN'T

@Zerthleck_01 6 жыл бұрын

x .BOSS. x hahahaha

@nickpulice1312 7 жыл бұрын

When i saw this in my notifications I was so excited

@nahte724 6 жыл бұрын

Nice job. I like the simplistic design of the electronics and the controls.

@tucksik3065 2 жыл бұрын

i love the sound so much for some reason

@unclearsector4266 7 жыл бұрын

I like to make stuff to past I like to make stuff: "I will finish... what you started."

@BlackBeardProjects 7 жыл бұрын

That's cool man! I Love it! The only Idea I can come up with is to make the top cap a bit convex :) Keep it up

@rockinHurley777 5 жыл бұрын

The ignition is really smooth good job

@seno1205 3 жыл бұрын

Strong your skills have become

@echundotcom2 7 жыл бұрын

Awesome! Love how your video is exactly 1337 long!

@40options19 7 жыл бұрын

echundotcom what is the video time linked to?

@echundotcom2 7 жыл бұрын

Being so "elite"... 1337

@seabo9566 7 жыл бұрын

echundotcom what does 13:37 mean?

@echundotcom2 7 жыл бұрын

en.m.wikipedia.org/wiki/Leet

@yaboi2362 7 жыл бұрын

I realize from all of bobs videos when he has his beard he is so happy and enthusiastic and when his beard is shaved he just so gloomy upset

@Iliketomakestuff 7 жыл бұрын

+HuskyMUSKIPZJr those were just early and I was very uncomfortable in front of the camera.

@limaman7262 6 жыл бұрын

I had an involuntary "WOW" escape me when you turned your still dissassembled saber on and off with the sound effects. I'm new to the channel and so far enjoying all your work!

@ster950 5 жыл бұрын

Your lightsabers will make a fine addition to my collection!

@Azusa3002 7 жыл бұрын

Who's watching but never make it? 😂

@OPgamingstyle 7 жыл бұрын

Rj Destroyer me, I don't have access to a 3D printer

@TehCubeGirl 7 жыл бұрын

Wow! This is soooooo cool!! I was so surprised how bright it was when you turned it on the end. Great job

@KellenBluestein 6 жыл бұрын

I've been looking for a good lightsaber soundboard, and this is an amazing idea, I can't wait to get a teensy and finish my lightsaber I've been working on for a while. I know it's late, but thank you for mak8ng this video!

@stevrgrs Жыл бұрын

11:21 Ahh the joy that every tinkerer feels once something goes as expected :) Well done !

@Greaseoverwatch 7 жыл бұрын

I keep yelling at Peter Brown about making an epoxy resin lightsaber

@lynettesuguitan1779 7 жыл бұрын

MAY THE 4TH BE WITH YOU!

@renderforest9295 7 жыл бұрын

#imperial_march

@md_plays 4 жыл бұрын

May the force be with you too

@Garabeto 6 жыл бұрын

Today I talk for my class about the influence that movies have in the engineer, and yesterday I spent a lot of time watching your videos (like always) and ended up giving me the final touch for my work, (I hope you don't mind) I screenshot your Matrix of leadership and this video, you were the perfect example about mi work. (by the way, it was a success) So thanks

@wa1ufo 7 жыл бұрын

You are an incredibly clever dude!

@MrSoftwizard 7 жыл бұрын

The sound effects are awesome!

@twincities69 6 жыл бұрын

Looks super AWESOME!!!

@YD0011 4 жыл бұрын

As a beginner, so many things to learn. Thank you for sharing this. It is inspiring to see.

@naufalrafi8204 7 жыл бұрын

The opening 🔥🔥🔥

@Paullebbon 7 жыл бұрын

Great work, your ideas are totally awesome. I was trying to make one with a laser inside, but LED's are such a better way to go.

@gamestation130 5 жыл бұрын

This lightsaber will make a fine addition to my collection

@xXArmageddon1382Xx 5 жыл бұрын

Oh my goodness Bob, this is amazing!!

@Matiyemar1 7 жыл бұрын

Finally!. Great work and videos.

@Phantom-hy2ix 5 жыл бұрын

Great video.The hilt in my eyes always is the important part, for it's the part that shows the most character. Not bad for a first attempt ;)

@ravinpeiris10 6 жыл бұрын

The swing soumds are just so cool tech is so cool!!!

@kaindal545 4 жыл бұрын

Your lightsaber will be a fine addition to my collection !

@markycupko 6 жыл бұрын

*Gooooood Anakin, goooooood!*

@nobleraccoon2752 6 жыл бұрын

markycupko Palpatine.........

@darthvader6493 4 жыл бұрын

DEW IT

@itzyaboiflaco9392 4 жыл бұрын

He was to dangerous to be kept alive

@Antoniomarcogirellini 4 жыл бұрын

General Grievous would like to learn your Location

@iL-uu3me 6 жыл бұрын

i love the key sound u put in to tell u that it was on

@Seba_305 4 жыл бұрын

You’re lightsaber should soon be an addiction to my collection

@12Cortana 7 жыл бұрын

Hello, two questions: What sort of Primer Filler do you use? Which layerhigh do you choose in the slicer? I printed and and glued a Halo Master Chief Helmet, but its so much work to sand and very upsettering. Greets from Austria Jakob

@lxximodzxxl3954 7 жыл бұрын

#MayThe4thBeWithYou

@antonlindroth70 4 жыл бұрын

This lightsaber will make a fine addition to your collection

@vibeknight2174 5 жыл бұрын

I love your videos! I can’t wait for the second version!!!

@ColdHawk 6 жыл бұрын

Awesome! I love the [inner] little boy that jumps out when you turn that thing on! Is heat build-up a problem with wrapping the led strips in foam inside the tube?