How To Make a PS2 Bluetooth Adapter | BlueRetro Tutorial - Use PS4 Controller on PlayStation 1 & 2

Рет қаралды 4,052

Slot1Gamer (Electronics Guides & Repair Videos)

5 ай бұрын

This video will show you how to build a Blue Retro PlayStation adapter, compatible with PS1 and PS2. It allows you to use bluetooth controllers on your PlayStation!
♦♦♦♦♦More Stuff in description ♦♦♦♦♦
Thanks For Watching!
FILES: mega.nz/file/QtFVWSpQ#NflR7bC...
Please Subscribe for more videos.
PARTS:
(US) Resistor Kit (0805): a.co/d/0DHP2br
(US) Resistor Kit (0603): a.co/d/4ZSSiJc
(US) Capacitor Kit (0805): a.co/d/4yp7z8U
(US) Capacitor Kit (0603): a.co/d/eiCf75W
(US) Voltage Regulator: a.co/d/jgfkvfr
(US) 3mm LEDS: a.co/d/2zcKoKE
(US) ESP32 4MB : a.co/d/dJOFqRJ
(US) 2 pin SMD Switch: tinyurl.com/bdedb59j
(US) 3 pin tact switch (choose 4.5X4.5X8MM): www.amazon.com/s?k=5x4+Moment...
When ordering the PCB, choose 1.6mm thickness, FR4, 2 layers, HASL, 10z Cu
PCB Source:
github.com/Micha213/BlueRetro...
Firmware Source:
github.com/darthcloud/BlueRet...
Feeling lazy? Premade ones:
(US) a.co/d/gBuH5DC
(World) ja.aliexpress.com/item/100500...

Пікірлер: 25

@musikboimusikme Ай бұрын

At 7:38 you set in 5volts then at 8:05 it is set in 3.3v, many will damage their esp32 so be careful dealing with UART voltage settings.

@EmilePolka 2 ай бұрын

Aside from button, every parts should be available already if you just buy a full fat esp32 board. As for power he said, no you dont need to beefup the power here since esp32 is BLE and ps2 controller consumer way more power specially with the rumble motors running.

@barbsfpv3066 Ай бұрын

This video is great. I thought I’d mention one thing though, PS3 Dual Shock controllers are a much better pairing for the PS2, since they also have pressure sensitive buttons like the PS2 Dual Shock. Some PS2 games need these buttons to feather their controls. The PS4 controllers work fantastic with the PS1 though. The Dual Shock 3’s can be a bit fiddly with BlueRetro since you have to program in the BlueTooth addresses manually, though it can be done. I ended up using Wingman adapters on my PS2 with DS3 controllers, and BlueRetro/PS4 controllers on my PS1.

@paki26th36 5 ай бұрын

Niceee, now do one for xbox one/series

@rishilmhatre5102 22 күн бұрын

Bro near my place not pCB service how to make without PCB mini Compaq ps 2 Bluetooth receiver make one video please

@Slot1Gamer 20 күн бұрын

You can buy a pre-made one in the description

@rishilmhatre5102 17 күн бұрын

I am staying India very high transport duty

@Slot1Gamer 17 күн бұрын

Even from China ?

@ythalorodrigues6441 3 ай бұрын

Hello good evening, I would like to know if you know if it is possible to exchange the 2x USB 1.1 inputs on the PS2 Slim Model for other 2x more modern ones and also if it would be possible to increase its processing power?

@Slot1Gamer 3 ай бұрын

Sadly you can’t increase the usb speed on the ps2 that I know of Some slims still have the internal connections for a HDD, you can add it back in using some mods. Even if you could increase the processor, the software (games) likely wouldn’t be written to take advantage of it, much like cpu and ram upgrades on the original Xbox

@ayellowbeard 2 ай бұрын

I'm wondering if it's possible to install a wireless adapter on the inside of an original SNES instead on the outside so that it has an permanent onboard wireless connection but also still have functional external controller ports.

@Slot1Gamer 2 ай бұрын

Yes you can There is internalised versions of blue retro project. It not just for PS2, the internalised version has physical controller detection, so it can let you use both

@ayellowbeard 2 ай бұрын

@@Slot1Gamer Awesome thank you so much!

@Mimiclify 3 ай бұрын

Como fazer blue retro funcionar pra 2 controles sem fio

@Slot1Gamer 3 ай бұрын

currently not supported for ps2, it might be updated in the future

@musikboimusikme Ай бұрын

Better use a 3.3v UART than 5v.

@Slot1Gamer Ай бұрын

The pcb design appears to have VCC go through the regulator regardless of if it’s from the socket or the soic bite or the UART solder pads. It’s something that might have to be brought up With Mi213 regarding RXTX voltages

@G-zeus_M 3 ай бұрын

Here comes the party pooper but a wingman 2 would be cheaper with more functions including a USB A port for arcade sticks.

@Slot1Gamer 3 ай бұрын

It likely is but I like buleretro as it’s fully open and can be internalised

@G-zeus_M 3 ай бұрын

@@Slot1Gamerfor that matter I would rather go for the big unit with multiple connections on different consoles as envisioned by darthcloud since I have all the systems that blue retro supports, I literally I’m just waiting for someone to fully convert a Dreamcast controller to blutooth with a sp32 and have a VMU cradle with the base, when that is done I will fully jump into the bluretro craze

@SavageCore6 2 ай бұрын

A RetroScaler version of this is £10 on aliexpress, wingman more like £40. Am I missing something?

@Oke0303 4 ай бұрын

Can I buy?

@Slot1Gamer 4 ай бұрын

Yes you can buy pre-made ones; (Affiliate links) Amazon: shorturl.at/amFGP Alexpress: s.click.aliexpress.com/e/_Dm7yX8N

@jimmy8380980 5 ай бұрын

Dude you want me to buy so many thing and also work too much Why wouldn't I just buy one Also I need one that let's me connect multiple controllers at once

@Slot1Gamer 5 ай бұрын

Multi tap support is available in PS1 mode Maybe it will be updated for ps2 mode soon