Hands down the best KZfaq channel for Hot Rod building and Fabrication.....!!!!!!!!!!

Cracked me up with the “Japanese” comment about your math prowess. Always great videos.

Wow, perfect ring cut!

Great video! The button head screw was an awesome idea! Thank you

Even if She looks like a Shop teatcher i think its You thats is the teatcher ! Always the best and easy to understand videos, Prepering is the key to make nice and god jobs/parts , Actuly Bangin Restoring A 47 HUDSON PU , used the ruberband trick to make the middel pressing on the cab , the outher day Turnd out Awesome !! //Dan in Sweden.

Somewhere a machinist is crying after watching you scribe with the caliper. Good information, I think I may do that this weekend. Very glad I put off buying a circle jig now.

I watched these videos out of order lol I like the screw for the spacer great idea.

Just watched Metal Reborn. Fine job sir. Very much enjoyed it. Very glad I found your channel Karl. I learn something every time.

Nicely done. You are a teacher.

Excellent idea.

Great tool and simple to make. Two thumbs up.

12:48 I’m looking at that center ‘waste’ with a hole in it. Often, that is probably useful. Desirable even. But this gave me an awesome idea for a variation. I’m probably never going to want to (or need!) a cnc table - especially for the floorspace factor- but somewhat regularly I need to cut shapes, curves and circles. A modification of this basic idea combined with some woodworking tricks (my other income-producing fab skill) I do with a router and bandsaw will give this super powers.

Love these homemade tool videos! Looking forward to spending time in my shop this winter, working on my projects and using all these tips :)

awesome cut quality on those circles

Always look foward to your videos!!!

7/16", 7/8", Whatever it takes.... This was a particularly good video. Timely too, because I need to make what are called ttma flanges, used mostly on tank trucks. This neat little idea will make that quite a bit easier. Thanks, Karl!

Superb video, as expected. Kan’t beat Karl!

Great idea , actually I made one a year ago. I used a Cleco as my pivot point but I didn’t have a handle, great idea . Looking forward to Saturday night.

Your videos make me want to run to my garage and make something

Quick tip, drill a golf ball slightly smaller than the diameter of the end of your center punch. Press it on and you're gonna want to use your center punch for hours. They work great on old files with missing handles too.

It's ALWAYS helpful to have payed much attention in those annoying math classes. Fractions to decimal conversions get glued into your head and won't go away. Thanks for the great videos!

Definitely using the KISS principle……keep it simple stupid Well done Karl 👍👍

Yeah mon, another great video, thanks for the lesson! The documentary was off the hook, cool to watch it again, peace

Very nice!! I've made circle cutters for a torch, but never a plasma cutter!! Awesome!!!

Donut looks yummy 😋

Awesome, you make that look easy,thanks man 🤙

Kool trick, ready to see the next video

I always appreciate your tip and technique videos because I always get an extra take away from them. I have seen so many different circle cutting jigs but this one is about the simplest and the quickest to make. Great video thank you for sharing your skills. You deserve so many more likes than you are getting.

you sound like a great fabrication teacher, very detail info and you don't skip the details, which makes the difference, from a student point of view

Another creative idea thanks for the great videos!

So stoked I found this channel man. You explain everything so well.

That’s a wicked method. Cannot free hand those circles for sure. 😎👍🇨🇦

Nicely done! Thank you for your time.

That was totally wicked!

Mate, I have just come across your channel. I own road trains in Aus and do heaps of my own maintenance work and have older trucks which are so hard to get brackets and such for.... definitely now an avid watcher of your channel tthanks for the tips!

Time travel, lunch time on Friday here in Xi’an. Great tips again. Made my own for an oxy-acetylene torch in the past.

Great work yet again, that finish the plasma gave was really smooth.. gives me a plan to invent an adjustable version possibly integrating a vernier slide ruler 🤔

WOW !!!! GREAT SCHOOL, LEARN EVERY DAY SOMETHING, NEW...( THAT DON'T SEE BEFORE) THANKS RALPH { P.R. AMERICAN TERRITORY}

TOOOOOOOOO NICE!!!!!!!!!!!!!!

Really really enjoy the content watching all the time 💯🔥

Nice lessons, learning so much. Thanks!

awesome brother! Just made one. Saved me 40 bucks and got you a thumbs up

Just stumbled on to your channel, the 70 shop teachers does a great job with the camera…

Funny, shop teachers i never had. Instead I had to work in the Norfolk shipyards for the summer, or a custom signshop. My friends were in shop class

Awesome Tutorial, Kristina & Karl! I love how in-depth you are for us in KZfaqland!!

All the little home made tools always make that little bit of a difference 😊🛠️❤️

Sweet ! Nice and easy just as I like it!

Excellent and instructive video. I always learn great things from you! Despite this is not the purpose of your channel, I appreciate you consider safety aspects in all what you do.

Thanks for another great video. Have a great weekend.

Awesome video today thanks from Melbourne Australia 🇦🇺

Great as always!

Loved the Japanese comment! There are so many tools out there to do this... and I have purchased none of them. Happily, yours can be made from scraps I have and you just proved for me that it is worth doing! Thankyou so much for another great video!

There is a lot of cleverness in simplicity. Thank you for the tip!

I just made one of these. I’m making corners for my flat bed. Got the circles cut, both the easy and hard way. Works great! Thanks again for another great idea!

Wow...that was impressive.

Thank you, luv your talents. Good job

Very nice work, Great video thanks for sharing

Молодчага! Друг - у тебя золотые руки!

Very useful tips! 👏👏👍👍

Great tool. Thanks for sharing

Nice home made tool, looking forward to the next video

Cool! Looking forward to the next video 👍

Another great and simple video! Can’t wait to see the film too!

Thumbs up for using a nut driver lol. A tip on the nylock nut, use a wave washer if you need a smidge more tension ;)

well done there i like it so and will take it a step further once i have ill send you some pictures thanks for keeping the content different cheers

Karl the circle cutting tool is a nice tool and seem pretty easy to make and use. Great idea Karl, keep up the great work you do. Thank you for sharing.☺️☺️☺️👍👍

Good job . This reminds me I got to get new tips for my plasma.

Another amazing lesson on how to do what could be a messy result. Your method came out so cleanly and quickly. Thanks for the video.

Wow. So simple. And turned out perfect

That is awesome! Thanks!

Really slick. Like it a lot, thanks

Молодец. Нужно преподавать и учить молодежь этому делу

Good stuff. Thanks. That should work well with my 45xp

Sweet, Thanks for the video.

Thanks for the awesome idea dude 👍😎 your videos rock 😃

Nice Brother!!!!!!!!!!!!!!!!!!!! 😀

Dunno why I need a washer that big, looks fun to make

Love it! I know…. Japanese! You should have said after that…. That’s why I didn’t go to Harvard! Keep up the good work!

Good content.

nice work always watch your videos I worked in sheet metal for 27 yrs

Nice work!! Im going to make one of those this weekend

As usual, excellent video. Cheers to the Camera Christina! Great shots and production, and perfect ideas. I NEED a circle cutter for my little plasma cutter and will replicate yours.

Great idea! Suggestion would be to show the end result up front on these videos so we can see that the they're well worth watching!

That was so easy..... now that you taught us how to do it!!! Thanks!!

That was some beautiful plasma hand cutting because of that jig you made! Very cool!

That's great makes a real good finish Cheers

Karl you are awesome bro..really looking forward to your next video...be safe...until then👍

Thank you guys!!

Nice!! I'm defiantly replacing What I have in the floor of the VW now!!!! I'm kind of interested in those interior braces in the Model A as well.

Nice cut!

Good job bro. Looking forward for the next video. Thank you.

Metal Reborn!

Nice version of a ⭕️ cutter-Well Done! ✅👍

Genuinely inspirational sir - I need to invest in a plasma cutter :)

Karl, Thanks for sharing your ideas on the circle cutter. It works so well & so easy to cut perfect circles. As always , well explained , well filmed (Thank You Christina) , & an inexpensive self made tool. Looking forward to watching Metal Reborn this weekend Thanks again Karl for all you do & share with us. Stay Real Rick

Glad you talked about your move to new shop,I was going to ask. Hope to see videos on it before you move in and then wail your moving. Great videos.

Great tip 👍

Great work

Wow, like always I get so much from your videos! I can hardly wait to build a circle cutter tool for my plasma cutter! Thanks Karl!

Very nice!