Seriously… you are helping so many of us “newbies” such as me. Beautiful work. Thank you for sharing your experience.

That was an excellent tutorial, thanks for sharing 😀👍🏻🇬🇧

BEAUTIFUL! I"m going to try it. Its a lot easier then all those pieces you have to put together.

Fantastic job as always Max. Thanks for showing those who don't have a carpenter shop in their garage that they can make great looking flags too.

Love the grain patterns. Makes the flag look like it's blowing in the wind

Loved it! Have been wondering if I could use plywood instead of cutting 1-1/2" strips. You answered my question. Thank you.

Great job! Really cool! Be careful with the big box stores doing the cuts. Measure before you buy it. I've had a uneven cut and didn't realize until I got home. Best to do your own cuts if possible.

Awesome job, I'm going to start making one tomorrow

Absolutely awesome man!

Great job Max, love it! You explain everything and make it easy for anyone to make✌🏼❤️🙏🏼

Now I have try this! Thanks for sharing.

Excellent tutorial. Your video is exactly what I was looking for on how to make this project using one piece of wood. Not everyone has all the tools and all the expertise on using all of those woodworking tools. Great job. I also like how you sprayed the back of the union to hold it together so you can paint the stars white. No one else has shown this. I also like how you explained to clean it off with mineral spirits. Great job

That’s gorgeous! I finally made one out of tobacco sticks all by myself! It turned out great but….. nothing like like the ones you do! No torch for me because I’m scared of that thing! Lol! The scorching does make it beautiful!

Great video, so excited to make one! Thanks so much!!!

Simple and looks great. I would seal the back and the sides to help increase the lifespan if you put it outside in the weather

Nice 3D look!

Wow! Looks great. I didn’t think those lines would come out that hood. Thought it would bleed through. 👍

Very cool. Made a few out of 1x2 but this is a pretty cool idea. Thanks.

Nice!! I need to try this one.🇺🇸Thank you Max!!

Great job! Would make a great base for a patch and challenge coin holder!

Wow that looks amazing great job 👏 🍻

Awesome, thanks for all the tips. Mine did not come out as clean as yours did (between the stripes) but it was fun and my garage loves it!!

Look great and super simple!

Absolutely beautiful! It’s on my project list.

Awesome job. Thanks for sharing.

Thanks for this one Max! I really love it. The burn turned out so awesome!! : )

Awesome as always Max. You got me started on my road to flag making.

Great job. Very clean and crisp looking flag. I’ll make one of these. Thank you

Beautiful work !!

Seriously wish I could get my white to look as great as yours!

Looks good for just using ply wood

Well done sir !!!! Awesome

That looks awesome and I am going to make one. A couple of suggestions is I would also stain and or seal the backside also and also maybe the tape you could use 1 1/2" wide since the stripes are that wide. Great project for sure and I'm a new subscriber

Awesome job. I'm starting mine today.

awesome

Great work again Max. I love this. The only thing I would worry about using the plywood is that it will warp over time. Especially if it is in a garage or anywhere it is going to experience heat and then cold as the climate changes. I wonder if finishing the sides and back with sealant clearcoat would help.

Wow!! another home run, great job Max as always. To bad the price for wood is still high.

Lindo trabalho

Nice job as always. Have you seen the demand for wood flags not as popular say a year ago? Thanks.

Hey Max, great video as usual. But do you take the tape off right away after you stain the red. And does it bleed through

Beautiful

Have you ever thought of making a vertical tattered flag? Made a couple myself, I think people would enjoy you making one.

Really nice job on the plywood flag even though it's not an actual cloth flag I still wouldn't place it on the ground.

Have you ever thought about a vinyl cutter to do the stars?

Super nice

Excellent Vid! I was looking for something simple to send to my sister and this is just the trick. Question.. how do you ship your signs. Just wanted something cheap for one time use. Your videos have been a wealth of information and I appreciate every one of them. Thank you.

Really nice job!!! Was there any residual left from the tacky glue on the Union?

I found that the easy tac residue sticks to the union when you peel of the stencil. I don't know maybe I put to much easy tac on.

Great build Max, does the spray paint become an issue on the stencil from using/spraying over and over?

Looks great! Ever try using epoxy instead of the stain or clear gloss? Edit: also have you tried using a router for the edges?

I know you’ve done it two ways, the 1 piece and the individual slats of wood. Both look great but I’m curious which do u prefer? I’m debating which way I want to make mine.

Great looking flag could I make a coin holder using the same technique

Looks great, what was the reason behind putting a coat of clear before adding the stars? Just curious because I haven't painted stars on before.

Hey Max I wonder if you could make a wavy flag using that technique?

How do you not get stain to not bleed over into the other colors? Is it just sanding it better? Putting a poly on between colors?

what did you use for the white stripes? Semi transparent water based wood stain?

Can the stencil be cleaned and reused? Would mineral spirits work? Great job! Jim

I am not experienced by any means on wood and sturdiness but will that wood you’re using warp if it’s outside in the elements?

Hey Max, I noticed on this project you sprayed the clear coat on the union then sprayed the stars. Is that the best way? I know with the easy tack it can leave behind glue residue. Thx

Great job. How much for the flag brother

Great job. Where can I find the star stencil ?

Where would someone sell a flag like this and how much would be a reasonable price? Just curious. 🙏🏻

what else can we use besides the Eas Tac? I can't find it anywhere.

🤩🤩🤩

does the gloss help with bleedind prior to the stars ?

Not able to find tinted stains. Help! Thx

Did you buy it at home depot? Or lowes?

Can you tell me the colors you used. Please and thanks

Do you wipe the stain off in between coats? You said you do 2 or 3 coats.

I did mine , but it warped when I was torching it. How do you keep that from happening? It was flat when I started but when I was done torching it was warped. Thanks Chris

Can you make a flag with raised 3d stars

Are you using the semi transparent stain?

Can you use polyurethane to seal it?

Are all the stains solid color or semi transparent?

That's a random orbit sander not an orbital sander.. the 2 are very different machines.. 1 1/2" wide tape would make a lot more sense. to align your star template, tape it down one edge before the spray glue, then use the tape as a hinge, turn it over, add the spray glue and flip it back for perfect alignment. Another way is to paint the stars BEFORE the blue, then wipe the blue stain on and it won't stick to the white paint.. You also need to add stiffeners to the back,, that plywood will warp real bad..

does anyone sell them like this? single piece wood, with the white stained striped

how much you sell it for ?

Do you sell these flags?

Jesus such bad prices.

You do cool stuff, I hate how people ask certain questions and you won't respond. To me it shows you're not really interested in helping people just promoting your product. My opinion is you guys that do that on KZfaq are a-holes and are the reason I don't subscribe you the channel's, if you're not going to help others put it in your description that you won't answer questions