How to make a Table saw and Table saw fence.

No video

How to make a Table saw and Table saw fence.

Рет қаралды 381,895

mr. IQ homemade DIY

5 ай бұрын

DIY table saw. Sliding carriage. Table saw fence

Пікірлер: 122

@joosepkunder 5 ай бұрын

It is always good to see when someone makes something great out of basic material by using simple tools. Great work man!

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much 🙏

@tamimabushafii 4 күн бұрын

Very impressive

@mr.IQhomemadeDIY 4 күн бұрын

Thank you very much 👍

@fatroberto3012 4 ай бұрын

UK Health and Safety regulations say that a circular saw used for rip cutting should have a riving knife within 8mm of the blade. Most modern saws don't have one as standard because they are generally used on sites for cross cutting, it stops them doing plunge cuts and most importantly it adds a few pennies to their manufacturing costs. However, they are often available as add-ons. I made my table saw using a Bosch and the riving knife was well worth buying. It just feels much safer! I also made a safety switch that I have to poke my finger through a hole to turn ON but can turn OFF with my knee from where I stand.

@mr.IQhomemadeDIY 4 ай бұрын

You did the right thing. I have this test table saw, soon I will make another one with a shutdown button like yours.

@timtim4603 4 ай бұрын

Please tell me where you got the Riving knife as I’m having trouble finding this

@diniswoodgrain 4 ай бұрын

This is very nice diy table saw tutorial. it is highly budget saving for a country like me where real table saw are expensive 👍👍

@mr.IQhomemadeDIY 4 ай бұрын

Thank you very much for your comment 🙏👍

@bradleytuckwell4881 3 ай бұрын

Looks like a fun build great job too

@mr.IQhomemadeDIY 3 ай бұрын

Thank you very much for your comment 👍

@florianbecker1982 4 ай бұрын

Awesome! Great Job! Really inspiring Tutorial. Thank you so much for your efforts making this Video; i will make my own table saw according to yours 😃👍🏻

@mr.IQhomemadeDIY 4 ай бұрын

I am very pleased that my videos inspire people to do something with their own hands. Thank you for your comment.

@user-bo8bi9oj7m 5 ай бұрын

Быстро, красиво, практично... Супер.

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment 👍

@alfredarchor905 Ай бұрын

Pro work....great job

@mr.IQhomemadeDIY Ай бұрын

Thank you very much 🙏

@victoremanuel494 Ай бұрын

Meu sonho

@ferdinandbauer5827 3 ай бұрын

Und das alles mit 19mm Spanplatten? Scheint mir sehr wackelig. Wie will er da Platten drauf schneiden?

@mr.IQhomemadeDIY 3 ай бұрын

All dies ist aus 16 mm Spanplatte gefertigt. Die Konstruktion erwies sich als sehr langlebig.

@johnefde4797 4 ай бұрын

You're own made tablesaw very very impressed.

@mr.IQhomemadeDIY 4 ай бұрын

Hello. Yes, I made the saw table myself. Thank you very much for your comment 👍

@bradleytuckwell4881 4 ай бұрын

Nice build and it’s super accurate well worth a sub

@mr.IQhomemadeDIY 4 ай бұрын

Thank you. Subscribe to the channel, there will be many more interesting videos

@titol34 4 ай бұрын

very good job with tools not too expansive :-) well done keep on bro

@mr.IQhomemadeDIY 4 ай бұрын

Thank you very much for your comment 👍

@victoremanuel494 Ай бұрын

Linda demais ficou e de longe parece ser bem preciso o esquadrejamento e as medidas

@victoremanuel494 Ай бұрын

Faz uma dessa .pra mim e manda pra João pessoa sou teu fã. Kk tenho vontade de fazer moveis mais não tenho essa mesa de serra circular faz uma linda dessa pra mim

@mr.IQhomemadeDIY Ай бұрын

Obrigado pelo comentário 👍

@budiasakadek3342 Ай бұрын

GOOD JOB. AMEZING

@mr.IQhomemadeDIY Ай бұрын

Thank you very much 🙏

@antallaczko8793 5 ай бұрын

Nice build. My only concern is the distance between the end of the blade and the riving knife. Makita has circular saws with a riving knife, which moves with the blade. That model is way safer.

@mr.IQhomemadeDIY 5 ай бұрын

Hello. Unfortunately, my saw model did not have a riving knife, so I had to make it myself.

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment 👍

@user-sr8ic6xz6p Ай бұрын

❤❤❤

@mr.IQhomemadeDIY Ай бұрын

👍🙏

@kgcem Ай бұрын

Top parabéns 🇧🇷

@mr.IQhomemadeDIY Ай бұрын

Muito obrigado pelo seu comentário 👍

@alpachino468 2 ай бұрын

T-square and spirit level, bro. Use them!

@mr.IQhomemadeDIY 2 ай бұрын

Thank you for your comment 👍

@williamoliveira1622 5 ай бұрын

fantastic, incredible!11

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment 👍

@francoisf195 3 ай бұрын

Very nice!

@mr.IQhomemadeDIY 3 ай бұрын

Thank you very much 👍

@Cahsolotree 5 ай бұрын

Fantastics,i got new ideas thank you

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment 👍

@micheyy2010 5 ай бұрын

А такая здоровенная каретка удобна-ли? Не слишком длинная? Кстати, если есть возможность, достать HPL панели, каретку лучше из него. Он жёстче, чем ДСП. И его не ведёт от сырости. И скользит, как падла.

@mr.IQhomemadeDIY 5 ай бұрын

Каретку хотелось бы ещё длиннее, но ширина столешницы не позволяет. Я бы советовал делать ширину столешницы хотя бы 1200-1300 мм. А не такую как у меня 800

@user-il5ws6gz2k 4 ай бұрын

Во замарочился человек. Получилось круче чем заводская

@mr.IQhomemadeDIY 4 ай бұрын

Спасибо большое за комментарий

@juliorios9860 5 ай бұрын

Fantastic!!

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment 👍

@b3arwithm3 2 ай бұрын

How did you ensure the tracks are parallel to the blade?

@mr.IQhomemadeDIY 2 ай бұрын

Hello. Changed the distance from the blade to the track. The back and front of the saw blade.

@ricardotello3219 5 ай бұрын

Fabuloso. Disculpe la pregunta: ¿Sería posible que proporcione las medidas de todos los cortes? (Lima, Perú)

@mr.IQhomemadeDIY 5 ай бұрын

Gracias por el comentario. Lamentablemente no tengo medidas.

@ricardotello3219 5 ай бұрын

@@mr.IQhomemadeDIY Gracias por la atención

@alter1736 5 ай бұрын

бажаю успіхів, друже!

@mr.IQhomemadeDIY 5 ай бұрын

Дякую🙏

@Tukangkayu_ae 5 ай бұрын

Gergaji meja yang sangat bagus

@mr.IQhomemadeDIY 5 ай бұрын

Thank you for your comment

@DaraHijazi 5 ай бұрын

Good one!! Do you have a plan for this table ?

@mr.IQhomemadeDIY 5 ай бұрын

Hello. Thanks for the comment. No, unfortunately I don't have a plan.

@prof2bobajob.klonded5 5 ай бұрын

Put it in the bin would be a start

@user-jd2iq8ft1l 5 ай бұрын

Залип, не буду скрывать. Насколько все чётко и продумано. Тот случай, когда руки из плеч и голова чем нужно заполнена. Как я понял, агрегат в квартире установлен? Мусора нет? Аспирация справляется?

@mr.IQhomemadeDIY 5 ай бұрын

Аспирация справляется почти на все 100. Иногда пробивается несколько опилок, но их совсем не много. Спасибо за комментарий 👍

@cr0w312 2 ай бұрын

Дружище, будем честны, делал ты на отебись. Зачем целую шпильку угробил? Хватило бы и обычного болта на 16. Пила - просто огонь.

@mr.IQhomemadeDIY Ай бұрын

Как?

@cr0w312 Ай бұрын

@@mr.IQhomemadeDIY Делаешь просто крепкую коробку, с тыльного торца стенка заходит вниз и служит упором. С фронтального торца ставишь стенку потолще, сверлишь в ней отверстие, вставляешь в него болт чтобы головка оказалась внутри параллельного упора, а резьба выходила из фронтального торца на 3-5 см. Надеваешь на резьбу упор и прижимаешь гайкой. Я использовал 10 см шпильки и 2 гайки.

@ricardofj 5 ай бұрын

Could you please share the details of the project, such as the thickness of the wood and also the measurements? Sorry if it's in the video and I wasn't paying attention.

@mr.IQhomemadeDIY 5 ай бұрын

Chipboard thickness 16 mm. table 1100*800

@user-by4so1ky3u 3 ай бұрын

Человек единственное существо на планете земля способный говорить. Эта способность существенно ускорила все созидательные процессы в социуме человеческого общества. Голосом передаются новости, идеи, концепции, без речи невозможно представить современное общество и цивилизацию в целом.

@mr.IQhomemadeDIY 3 ай бұрын

Thank you for your comment

@mr.IQhomemadeDIY 3 ай бұрын

Thank you for your comment

@romanrodriguez7542 5 ай бұрын

Exelente, es mejor con medidas.

@mr.IQhomemadeDIY 5 ай бұрын

obrigado pelo comentário

@patrickday4206 5 ай бұрын

Going to need this when the United States forces blade stops on all table saws

@mr.IQhomemadeDIY 5 ай бұрын

Thanks for your comment

@M.Elyami 5 ай бұрын

Or, may you get rich and do good, and then you have no issues buying even the one that is better than a sawstop, that would stop before touching it without breaking the stop mechanism 😎 or leave the states 😅

@ProbablyUnacceptable 5 ай бұрын

would love the plans for this

@mr.IQhomemadeDIY 5 ай бұрын

Unfortunately I don't have a plan.

@yassergohiny4691 5 ай бұрын

Perfect

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment

@aydoooo 4 ай бұрын

nice

@mr.IQhomemadeDIY 4 ай бұрын

Thank you very much for your comment

@user-nh2zf2wi9m 4 ай бұрын

Здравствуйте какие размеры стола?

@mr.IQhomemadeDIY 4 ай бұрын

Здравствуйте. Размеры стола 800*1100 мм

@user-nh2zf2wi9m 4 ай бұрын

Что используется для направляющих к коретки

@mr.IQhomemadeDIY 4 ай бұрын

Профиль для светодиодной ленты. У меня были остатки, поэтому я их использовал.

@Roman-jm1jm 4 ай бұрын

Добрый день. Можете дать ссылку на зажимы которые 13.52 минуте видно

@mr.IQhomemadeDIY 4 ай бұрын

kzfaq.info/get/bejne/gr-lfqd8z7-pp2g.htmlsi=BHRvTxWbZn1Rqokp

@mr.IQhomemadeDIY 4 ай бұрын

kzfaq.info/get/bejne/j7tyZdamq5eUhI0.htmlsi=awOD1oWptG4n4YwW

@wassim2364 5 ай бұрын

☕️👍

@mr.IQhomemadeDIY 5 ай бұрын

Thank you for your comment

@apocsurvival916 5 ай бұрын

Warning :: I HAVE ALREADY TRIED TWO OF THESE. AFTER PUSHING AND CUTTING A PILE OF WOOD, THE PLATE OF THE SAW VIBRATES INTO THE RECESSED AREA IN BACK AND FRONT. THIS WAS A DEGREE EACH WAY WHICH TAKING TO THE LENGTH OF THE TABLE ADDED UP TO 1/8 INCH. SO I BOUGHT A RYOBI AND CUT THE LEGS OFF, RECESSED IT IN A FULL SHEET OF MDF, PROBLEM SOLVED.

@mr.IQhomemadeDIY 5 ай бұрын

Hello. I have no vibration. Thanks for the comment.

@apocsurvival916 5 ай бұрын

@mr.IQhomemadeDIY yeah, cutting one board I can see that. Plus, by the time the sled is done, you have almost no blade left. I cut 4 x 4s from time to time.

@rooshey1234 4 ай бұрын

Did you work at ikea? I don't mean it in a bad way

@mr.IQhomemadeDIY 4 ай бұрын

No, I've never worked at Ikea

@rooshey1234 4 ай бұрын

👍it seemed it was the same way of making the holes centeres on the side🤔

@sinanozlu2730 3 ай бұрын

Ne mengenesi kullandınız

@mr.IQhomemadeDIY 3 ай бұрын

Thank you for your comment

@cbcothren 5 ай бұрын

how many sheets of melamine did this require?

@mr.IQhomemadeDIY 5 ай бұрын

👋 I made it from leftovers. I used about one sheet of chipboard. thanks for the comment

@bennym1956 5 ай бұрын

Nothing sketchy about this at all.....alot of work to build.

@mr.IQhomemadeDIY 5 ай бұрын

Thank you for your comment

@bluejay579 5 ай бұрын

これは用途が限られる。不要。

@mr.IQhomemadeDIY 5 ай бұрын

Thank you very much for your comment

@weingraben1 5 ай бұрын

Was hat die schnitthöhe ,4cm das ist Spielzeug nicht zu gebrauchen,unnötige Arbeit

@mr.IQhomemadeDIY 5 ай бұрын

The cutting height is 5 cm. It is quite enough for cutting chipboard and plywood.

@km2541 5 ай бұрын

OSHA would like to talk to you

@mr.IQhomemadeDIY 5 ай бұрын

Thank you for your comment

@SuperJinxter 5 ай бұрын

Or, just buy a table saw.

@mr.IQhomemadeDIY 5 ай бұрын

you can do it like that

@sot11cat 4 ай бұрын

Why?

@bradleytuckwell4881 4 ай бұрын

If you can’t say something nice don’t say it

@SeraphsWitness 2 ай бұрын

Bulky, expensive, unnecessary.

@bradleytuckwell4881 2 ай бұрын

@@SeraphsWitness nothing nice to say don’t say it better still don’t watch it