Sometimes chatter tools just don't work. Here is a quick easy texturing tool using simple carving burrs and a couple of bearings.
Пікірлер: 43
@glencrandall70519 ай бұрын
Excellent idea. Very well presented. Easy to make. Inexpensive. 👍👍 What's not to like. Three years old. . . don't know how I missed it in all that time.🤔 Thank you for sharing. And remember, when the wood goes around, the face shield comes down.🙂🙂
@SuperZmeister Жыл бұрын
You’ve inspired me to make this one. Thank you!
@richardcarlson37238 ай бұрын
I love textured designs on my box lids this is a great way to embellish the smaller ones . Thank for sharing!
@shaunhayward2 жыл бұрын
Brilliant! I just ordered some 1/8" bearings to try this.
@benpress88842 жыл бұрын
The background image in this video is great, and the trash can was a really nice touch.
@alfkey41552 жыл бұрын
Trash can = Wheely bin in the UK ,,. Regards Alf
@JimRodgersWoodturner Жыл бұрын
Just trying to create reality
@Sidswoodworkingprojects3 жыл бұрын
I'm gonna try it for my wood projects. Quick and simple. Thanks for the idea. TTFN Sid.
@JimRodgersWoodturner3 жыл бұрын
Good Luck
@WarEagledkp10 ай бұрын
Very well done & well explained. Thank you! Worth a “Like” and a Subscribe. 👍
@JimRodgersWoodturner9 ай бұрын
Welcome aboard!
@dianadougherty71873 жыл бұрын
Thankyou, I will try this. I always learn so much from your videos. diana
@JimRodgersWoodturner3 жыл бұрын
Thanks,
@williampeak88518 ай бұрын
Thanks for sharing this information ❤️👍
@RyanSmithElectroseed2 жыл бұрын
I'm subscribing not just because your videos are informative but low key that was funny as hell that backdrop wasn't real. I thought you were outside until you brought out the white board. And you can tell your wife is trying her best with the camera zooms and what not. lol. But serious. Informative thanks!
@JimRodgersWoodturner2 жыл бұрын
David Bentley is the videographer and editor - he makes me llok a lot better!
@jackskelton67732 жыл бұрын
Thanks 👍👍
@47596902 жыл бұрын
that was brilliant fair play
@masterlordkingАй бұрын
WELL im going to make one I ordered the burr set but the shank is .029 witch is not a 1/8
@andredupuis8497 Жыл бұрын
Thanks for thé ideas😅
@JimRodgersWoodturner Жыл бұрын
Your welcome. More ideas coming!
@johnmeeks96187 ай бұрын
I’m surprised you didn’t put a finish on it before parting off.
@RyanSmithElectroseed2 жыл бұрын
Btw always put an affiliate link or link to the amazon product you bought please so we can find it easy. Thanks!
@JimRodgersWoodturner2 жыл бұрын
Thanks for your comments, I'll try to remember to put in the referenced links. JimR
@alfkey41552 жыл бұрын
I used " Loctite gel supa clue " for the second bearings so it didn't run down the inside ,,. Regards Alf
@JimRodgersWoodturner2 жыл бұрын
Good idea
@scarcesmith4151 Жыл бұрын
👍👍👍👍👍👍
@pauldiperna9999 Жыл бұрын
Really enjoyed your video and I'll be making a tool. So many videos I'll be spanning a lot of time watching and learning. I could not find your chatter tool video. Would you add a link?
@JimRodgersWoodturner Жыл бұрын
I looked it up the chatter tool video is No. 21 in the series. Here is the link: kzfaq.info/get/bejne/n8mYkst7nt6plJc.html
@johnlipka6137 ай бұрын
Great. Now where do I get those bearings?
@JimRodgersWoodturner7 ай бұрын
Granger, KBC tools, and tool makers supply. They should be common product.
@andredupuis8497 Жыл бұрын
What do you do to jeep tool in place in béa ring thanks🎉
@JimRodgersWoodturner Жыл бұрын
A small rare earth magnet is cemented into the bottom of the hole with a little CA glue. The tool snaps to it and stays in place.
@mwaddellus Жыл бұрын
Any reason you can't just use the Dremel unplugged?
@JimRodgersWoodturner Жыл бұрын
Only you didn’t get to make it
@tailher1 Жыл бұрын
What do u think about single cut burrs?
@JimRodgersWoodturner Жыл бұрын
Not problem. May work better on softer woods. Don't drag them back and forth, pull in one direction to get a cleaner cut. JimR
@marykedykhuizen69023 жыл бұрын
Looked on amazon and cannot find the bushings. What are they called??
@JimRodgersWoodturner3 жыл бұрын
they are double sealed bearings with an ID of 1/8 inch and an OD of 3/8 inch. The amazon location of them is: https: //www.amazon.com/uxcell-R2-2RS-Groove-Bearing-Bearings/dp/B0824WN2RB/ref=sr_1_13?dchild=1&keywords=3%2F8+x+1%2F8+DS+bearings&qid=1629324774&s=industrial&sr=1-13 Just cut and paste this link into your browser and get them shipped. JimR
@tomhart61928 ай бұрын
Enjoyed your video, thanks for the Amazon link.
@klg12163 жыл бұрын
How would these work on wood?
@JimRodgersWoodturner3 жыл бұрын
Generally great on end grain and closed grain woods. If the wood is soft - it's a no-go. I used acrylic for the demonstration as the pattern is easily seen by the camera. JimR