People like you deserve huge huge suporters of growth and development in 21st century.i have learned a lot from your channel and i will help more people in my village.God bless you bro.

The best video I’ve seen for making towers thank you for such a detailed video.

of all the videos i have watched on how to construct the tower. this video is straight to the point and simple , clean and well done. thank you .

Been sharing this with everyone on my face book after i built mine following your design. Thank you for this. Loving it. Thank you very much sir!

You have a great talent there and you speak so clearly and the explanation was wonderful. Keep up the great work. God bless you.

Nice job! May give it a try. Thank you for the video.

Thank you so much for this video, I always wanted to do aquaponics but never could because of the high cost of towers in my area. Will definitely try this.

Thanks for sharing! Saw this design popping up in other videos and was wondering how it was done. Easy to follow :)

Very specific details. No wasted words. Awesome presentation!

Gunnar Shaffer, thank you for making this great tutorial and keeping it up! Since you have a company that now sells these it shows you are very honest. I have been growing tomatoes, peppers, strawberries and lettuce for many years using hydroponics and have been very successful at it. I have always wanted to build a vertical tower using 2 inch net pots but it was a challenge until now. This will save me a lot of space and I will be able to grow even more than I did before. I also plan on trying this method using a 55 gallon food grade drum. I would hook it up to a high pressure aeroponics unit I plan on building. I've had many people ask me about how they can start up a hydroponics unit. I will give them your website information.

thank you for sharing....your grow towers are beautiful...

Very cool! thanks for sharing.

Thank you, I have been looking for a method to do a vertical tower inexpensively. Thx!

Brilliant, thank you so much .

Nowadays, as the world grows, it is an excellent idea because in this way land is saved that can be useful for other important things.

I have the same blazer!!! from that time! love it!

Thank you so much for sharing!

Thanks for showing i will use this video to make my own

Nice suggestion ! Low cost and efficiency ! Thanks for sharing ! Like it !

Awesome dude!! Love the design it looks so pretty, I want to do this for my system!! I won't forget to credit you!

simple, beautiful and brilliant, thank you

Great tutorial. Thanks.

Good idea and neatly executed ...

Hey, that was awesome thanks for your time and expertise. Appreciate it.

Excellent! I was beginning to wonder how, and now I know . So helpful.

Great technique!

For new viewers, you may use 1½ inch pipe to make the holes..cut the end 45° so it slide easier..then adjust the angle of the hole accordingly..thank you

nice tower, am so doing this for my lettuce, thanks for the video

Bem trabalhoso! Ficou ótimo! Parabéns!

your towers are the best looking one out there !! great job, I will be building a few very soon !! thanks for all the info

Great video by the way!

Yes, I am doing this as part of my senior project at John Brown University. I will be making more videos this week! Thanks for letting me know!

Hey man, great job and great vid. Thanks for having taken the time to do it!

this is freaking great!!! thank you, I am getting to starting on this on Friday!

Great video thanks!!

Thank you for quality video

Loved your video

wow I love people, thanks for sharing this Gunnar Shaffer this is exactly what I was looking for!

Just ordered a tube! Thanks! Will make my own in the future if this works well... very glad you sell these was not looking forward to all the work. Happy to pay your price.

ThANK YOU FOR SHOWING US HOW YOU MADE THEM

Nice Job very well presented and explained. Thank You!

Amazing how simple you have done it!!! Greetings from Argentina!

thank you for showing how to do it

Absolutely brilliant!!! I am an engineer and super impressed with your design and your kindness (for sharing this idea with everyone)

Thanks from SriLanka !

Great video!! Thank you! Good advice I've read in the comments. Perhaps a quick remake of this, mentioning the heat gun, dangers of the gas from heating up the pvc pipe and the size of your wood tool. For me....what grade sandpaper?? Keep it short sweet & to the point like you did in this video. Too many aqua/hydro/aeroponics people seem to LOVE to monologue!!

wow....Thank you. very helpful!

Good job!! Thanks

Very informative

Great video ! I might try this some time later.

Great video......this is just the information I needed to build my own. Thanks for sharing. Keep up the great work.

Very detailed. Great Videos

man, you are a genius!!!! Thank you for the tip!!!!!

Good idea!

Excellent i will try 😊😊😊

Sanding is very important!

Wow... thanks

Great business idea brother.

Nice Job

Thank u bro i learn form u new things today 👍

Thks for sharing

Sir, I salute you!

I love it !

interesante no se me habia ocurrido felicitaciones por el aporte... congratulations

This video is very nice and informative THANK YOU SIR!!

A heat gun- way more efficient and takes about 1/4 the time.

thank you , now i know how to make it :)

Parabéns ótimo trabalho 🇧🇷

Thank you for yourvideo.

Excelente Gracias

Thank you i Love it 🎋

THANK YOU I LOVE THIS VIDEO

Thanks for sharing Gunnar, i used a heatgun rather than blowtorch to avoid burning or yellowing of the material.

Dude, you're awesome!

HI I have been used a system like yours but I like yours how many 2in holes can you get on the hole tubes

Hi thanks for your good work,my question is how you feed water both sides in the tower please?

eeeeeexcelllent ....! thank you

excellent design.

matur nuwun ingkang katah/ thanks you very much

Nice flares

I love it! :3

So since there is an edge bending back into the tube wouldn't the water run around the cut and avoid the pots? Or in the best case just water them a little?

Thanks

Thanks for sharing the idea. I followed you guideline and made my own vertical hydroponic pipes. However, do you have problem of water spill out and flow though outside the pipe? How can you it? Thanks.

This appears as a very good idea. However, I did this exact design after watching this video. the idea is great but there were some problems in its function. The sides of most of the cups leaked due to water splashing out of the corners of the cuts. Also I found it challenging to how to mount the pipe and stabilize it in a hydroponics system. I think with some good ideas and some modifications this could be successful. Thanks for the idea. Any mods to solve these problems would be great to hear.

Excelente

Very cool information man and thanks for sharing this info as this is something I would like to learn. You should put out a 1 day class or 2 day class etc.

Hello Gunnar, nice video. I made myself a tower following your video. it's fun to do, although mine doesn't look as good as yours. I'm having some issues with llittle leaks, water driping fron the side of the holes. Do you have any advice how to deal with that?

Really like this design! Would it be much of a difference instead of using these pots and rockwool, use clay balls?

Thanks brother

hello Gunnar I would go out of my system in beds culture to your tower-system. Your towers are of 4 inc diameter and 2 lines of plants , is to make room for the roots that are only 2 ? If I wanted to have 4 lines should I use tubes from 8 ? You have a rule that connects the number of plants , the volume of water , the weight of the fish and the number of recirculation cycles system pro hour or day ? Thank you for sharing your great work . Andrea from Italy

Tq for this info👍👍👍

Fantastyc congratulations

Hi Gunnar, Great stuff bro. About how deep those cuts for the net cups should be, I wouldn't be using a hacksaw

good stuff

How to Make a Vertical Growing Tower for Aquaponics or Hydroponics: Part

Looks easy and economical compared to others. How do you make sure that all net cups receive water from top evenly?

thank you for the idea, very greeat i loved it. God bless on your studies. Im also an engineering student looking for aquaponics ideas :)) you also look good :)

Хорошая идея

This very cool, good design and functionality, cheap. He's so handsome.