How To Make A White Ranger Helmet! Full Build Guide! Power Ranger Tutorial

Рет қаралды 15,748

Жыл бұрын

Part 2 of this how to make a white ranger helmet is going to be the full build guide with all of the sanding and painting steps! I really wish there was an in depth guide on how to make a white ranger helmet so i decided to fill that gap. The only tutorials i saw barely showed the process and even had people playing video games or trips to walmart in the video. This is a Full build guide to teach you how to make one of these helmets. I hope this helps you out!
If you want to see other projects im doing check out my instagram
@quest4nostalgia or come hang out in the discord.
/ discord
#whiteranger #powerrangers #powerranger #3dprint #3dprinting #cosplay

Пікірлер: 92

@SaturdayMorningProps 10 ай бұрын

20% OFF ALL DO3D FILES! code: Q4N20 ALL MMPR have been updated with new features!

@mikemerz8769 Жыл бұрын

I’m so glad I discovered this channel! This was an excellent and informative video! Thank you, I love building helmets and you’ve inspired me to finally tackle these (MMPR) helmets. Thanks again! Can’t wait to see more!

@SaturdayMorningProps Жыл бұрын

Thanks for the great comment! Plenty more MMPR content ahead!

@amirpeters2745 Жыл бұрын

You got me subscribed because of this! Nice!

@SaturdayMorningProps Жыл бұрын

Thanks so much!

@marcjones3169 Жыл бұрын

My first time watching one of your videos. I must say, that is my dream room. Games, crafts, collectibles. I see the racing seat too. Good stuff man. Back to watching the build.

@SaturdayMorningProps Жыл бұрын

It is definitely a little bit of nerd heaven, and goodness since the time of filming that it has been rearranged and filled with more helmets

@holidaystyles44 Жыл бұрын

loving the context,can wait for the green ranger build

@HDTView Жыл бұрын

This looks amazing! Great job!!!

@SaturdayMorningProps Жыл бұрын

Thanks so much!

@jacobrandall2092 Жыл бұрын

Sooo frickin cool dude!

@SaturdayMorningProps Жыл бұрын

Thank you 🙌🏻🤍

@organicoceans4459 Жыл бұрын

Man! I got that bug! Working on my green ranger 3d printed helmet now. Next is going to be yellow for my wife. Seriously though, I want to make them all now 😂

@SaturdayMorningProps Жыл бұрын

Exactly what happened to me, yellow ranger tutorial should be out next week if I don't get any more paint issues

@nicolasc7063 Жыл бұрын

Amazing work!!! please make the Gold Ranger helmet of Zeo...

@SaturdayMorningProps Жыл бұрын

I'm sure I will eventually

@smutsmat Жыл бұрын

I’m wanting to make drakkon for this Halloween/ con season so I think the steps you provided here helps a lot

@SaturdayMorningProps Жыл бұрын

🤘🏼 heck yeah, hope it comes out awesome. Honestly I'm sure it'll be better than the lightning collection

@smutsmat Жыл бұрын

@@SaturdayMorningProps Thanks. I hope it comes out well.

@genemunro1641 Жыл бұрын

Sure thats cool

@wernerjung8012 Жыл бұрын

Just subscribed, I love the helmets. I grew up on the MMPR and I'm wanting to get into 3D printing and do these helmet for myself as well. Thank you for the tips and the videos!

@SaturdayMorningProps Жыл бұрын

That's awesome thank you! Yeah I'm trying to have all the mighty Morphin helmets done soon

@wernerjung8012 Жыл бұрын

@Quest4Nostalgia well I'm watching and waiting, how much do you commission for?

@SaturdayMorningProps Жыл бұрын

@@wernerjung8012 usually about 400 shipped in the US

@wernerjung8012 Жыл бұрын

@@SaturdayMorningProps awesome, if I get too impatient, I'll hit you up for one.

@SaturdayMorningProps Жыл бұрын

@@wernerjung8012 I can also do printed kits for you to follow the tutorial for around 90-100 depending on the helmet and your head size

@vincestyles1030 Жыл бұрын

Great job

@SaturdayMorningProps Жыл бұрын

Thank you!

@Dohnny 10 ай бұрын

Hey Dylan, I wanted to ask you a question since I’m working on a white ranger build, how long did you let the gold sit on the masking tape before removing it? I just got done sanding off my final gold coat since the gold came up with the masking tape, I waited in intervals of 1 day, 1 day and a half, and 2 days, I even tried taking off the gold from my helmet stand after day number 3 with masking tape and it still peeled off. Each day had the same result, was wonder if you could help put me in the right direction lol . Gold: Rustoleum Gold finish, Tape: Yellow FrogTape. Thanks!

@SaturdayMorningProps 10 ай бұрын

Do you have Instagram? Or discord? Would be easier to help you out where we can message back and forth

@Dohnny 10 ай бұрын

@@SaturdayMorningProps Okay, sent you a message invite on Instagram.

@djangusroundstone316 Жыл бұрын

What did you do for the green ranger visor? Gonna be stating the finishing process on a green ranger helmet after the holidays.

@SaturdayMorningProps Жыл бұрын

Used an already black tinted welding visor since that visor was bigger than the face shields I usually use. About to start a green ranger helmet now for a tutorial

@shadowcosplay Жыл бұрын

You mentioned you can't apply the pattern of a visor for some helmets on the face shield. You can put two shields together to make it wider. Yes you will get the line in the center but if you look at the Power Rangers Helmets in the Ninjor/Master Vile Saga, they have a bar that's visible in between the visor. That helps to cover any seam.

@SaturdayMorningProps Жыл бұрын

Yeah didn't want the seam, Ive combined two for temporary visors before but definitely so much better just buying a large welding mask to then make a solid visor

@junior1232732 Жыл бұрын

what percentage filler do you currently use? and when you rivet the quick fasteners does it not run the risk of cracking or breaking the helmet?

@SaturdayMorningProps Жыл бұрын

i run 10% infill, and i have had no issues with cracking but if you dont feel confident you can put a small washer on the inside to help

@english27CFC 6 ай бұрын

Great video's, thinking of getting a 3d printer myself because i wud like to have the mmpr helmets . But its seems harder then i thought 🤣

@SaturdayMorningProps 6 ай бұрын

It's a good amount of work but anyone can do it for sure

@mateuszwagner2959 Жыл бұрын

Hi! Really inspiring, what 3d printer are you using? Or maybe you can recommend something affordable for somebody who would like to try with similar items like helmets? :)

@SaturdayMorningProps Жыл бұрын

I use the creality cr10s, I also now have a cr10 as well. I bought mine off of Facebook marketplace. It can be a little scary but they are so cheap on there. Usually it's people who tried to print and found out it's not so easy and sell them cheap to get rid of them.

@mateuszwagner2959 Жыл бұрын

@@SaturdayMorningProps Thanks! Asked friends and one got similar printer and should be able to print something like that for me. I'll try my best and do green ranger :) waiting for more stuff like that from you :)

@SaturdayMorningProps Жыл бұрын

@@mateuszwagner2959 I think I have enough content filmed ony phone to show how I did my green ranger

@mateuszwagner2959 Жыл бұрын

Few weeks later and I bought Creality Cr-10 v3, it should arrive before weekend. Of course I have to learn a lot about 3d printers and printing itself right now, but hopefully it gonna be a nice adventure. Just wanted to thanks again for inspiration :) following on YT and instagram and looking forward for next parts of Iron Man suits videos. :) Btw, were you thinking about painting with paint/spray gun instead of cans? Do you think it would make a big difference in painting quality?

@SaturdayMorningProps Жыл бұрын

@@mateuszwagner2959 congrats 👏 definitely lots to learn but that is a GREAT printer. Spray gun painting isn't really that much better and requires a large investment to get setup as well as buying materials in larger volumes. My buddy uses an hvlp gun and still uses cans for different colors

@tiepilotrs9336 Жыл бұрын

I'm thinking of getting into 3D printing now because of these videos and the fact that I can control the quality of the paint too. Was thinking of getting an Ender 3 to start but what would anyone else recommend?

@SaturdayMorningProps Жыл бұрын

Ender 3 is a great beginner printer but the size is gonna make you have to split helmets in to smaller sections and you'll have to get good and filling those seam lines. I love the cr10 line of printers very similar to the ender 3but can do full helmets

@SageMode3D Жыл бұрын

Ender 3 MAX NEO comparable in price but comes with metal extruder and auto leveling features. Id recommend spening the 40$ to get a capricorn tube and PEI Bed otherwise its amazing to learn on and will allow enough room for most helmets without cutting!

@tougeninja5898 Жыл бұрын

Whats the paint you used on the black

@SaturdayMorningProps Жыл бұрын

vallejo black acryllic

@5part4 Жыл бұрын

I bought a very cheap ready made 2 piece mask/helmet white ranger that's easily crushable which I hate. Because I wamted a actual helmet thats solid with clips on the side. It's called the hasbro official power rangers by disguise

@5part4 Жыл бұрын

Comes with a tag label and says 14+

@SaturdayMorningProps Жыл бұрын

I have no clue why youtube never showed me this comment, but my first red ranger was actually a flimsy costume helmet that i added buckles and a hinge to

@bkbricks_ Жыл бұрын

Would love to see your green ranger helmet

@SaturdayMorningProps Жыл бұрын

I honestly think I filmed enough with my phone to produce a video for it

@bkbricks_ Жыл бұрын

@@SaturdayMorningProps I'm down for that video! Great work man!

@SaturdayMorningProps Жыл бұрын

@@bkbricks_ thanks the green is honestly the one I'm most proud of so far

@dragonflatz Жыл бұрын

What kind of printer do you use

@SaturdayMorningProps Жыл бұрын

I have a creality cr10s and two creality cr10 v2 printers. They have been the most reliable for me and a great build size

@Aquariustaughtme Жыл бұрын

What 1k clearcoat do you use?

@SaturdayMorningProps Жыл бұрын

Been using duplicolor 1k high gloss but I'm gonna try UPOL high gloss from O'Reilly's next

@Aquariustaughtme Жыл бұрын

@@SaturdayMorningProps oh sweet! Thanks! I use rustoleum normally. Do u think using a duplicolor clear on rustoleum paint will have some effects?

@SaturdayMorningProps Жыл бұрын

@@Aquariustaughtme it won't and Rust-Oleum clear tends to dull metal Colors the duplicolor works amazing over metals

@Aquariustaughtme Жыл бұрын

@@SaturdayMorningProps thanks so much for this info!

@5part4 Жыл бұрын

Can you sell them cheap and the costume I've wanted to be white ranger so bad!! Ur helmet is made to perfection!! And also did you make any air holes because I've seen KZfaq videos and people get outta breathe from wearing it for less than a minute :/

@SaturdayMorningProps Жыл бұрын

Haven't had any issues with breathing in them at all, but I could sell you a raw print for cheap that you could finish yourself.

@5part4 Жыл бұрын

@@SaturdayMorningProps I have no skills in building a mask 🤣. No experience with 3d printer either :(

@wl7291 Жыл бұрын

At least you're actually wearing a respirator cuz boy so many people don't

@SaturdayMorningProps Жыл бұрын

I live in that thing 😂 but you're right so many don't or just do whatever when they are resin printing 🤯 maybe I'm just a worry wart

@Insaneshooter9 Жыл бұрын

Would you commission to do a green power ranger helmet full finish and everything?

@SaturdayMorningProps Жыл бұрын

Would Love to, message me on Instagram or join the discord to send me a message if that works for you

@Insaneshooter9 Жыл бұрын

@@SaturdayMorningProps thanks so much!

@jamiepassey8748 Жыл бұрын

Where do we buy the sql files????

@SaturdayMorningProps Жыл бұрын

Message the designer on Instagram he is listed in the pinned comment

@jamiepassey8748 Жыл бұрын

@@SaturdayMorningProps oh amazing, thank you!!

@xiconin Жыл бұрын

Can you PM me? I would like to know if you sell the helmets? Thanks!

@SaturdayMorningProps Жыл бұрын

Message me on Instagram or join the discord to go over the details

@jimmythe2820 Жыл бұрын

Totally agree with do3d. There quality is so bad.

@juliusferguson3068 Жыл бұрын

Do you sale these?

@SaturdayMorningProps Жыл бұрын

I do, this white was actually a commission, and the blue ranger coming up in the next video is also a commission

@kgotgamel7759 Жыл бұрын

@@SaturdayMorningProps can I purchase a red MMPR helmet please

@SaturdayMorningProps Жыл бұрын

@@kgotgamel7759 message me on Instagram Quest4Nostalgia

@kgotgamel7759 Жыл бұрын

@@SaturdayMorningProps I did brother lol

@user-ci9xj5ep8u 3 ай бұрын

Gold rangers

@dissident9702 Жыл бұрын

Show the begining

@SaturdayMorningProps Жыл бұрын

Beginning of what? If youre talking about how to print it there is a separate video for that

@junior1232732 Жыл бұрын

what percentage filler do you currently use? and when you rivet the quick fasteners does it not run the risk of cracking or breaking the helmet?

@SaturdayMorningProps Жыл бұрын

I run everything at 10% for helmets and armor, the only time I've really gone up is the handle of the buster sword, I haven't had any cracking with the rivots but you can add a tiny washer to the inside to prevent if you are worried