Awesome video!!! In your description if you could change 21” x (2) and 16” x (2) and also add 5 1/4” it would be a little easier to follow. Thanks for the how to!!!! 👍🏻

Okay….well, it’s all completed. I followed the instructions pretty closely and except for a few varying measurements, it is a near replica of the one in the video (no paint, however). It was straightforward and without your video it would have nearly impossible to build, so thank you for doing the hard work 🥲. I particularly like the double sheet metal approach as it makes a louder noise and weighs it down even more than a single sheet. Excellent design!!🤩

I built one to these specs and it worked great! Thanks!

We padded legs with split pool noodles to settle those corner arguments. Make a very different sound than hitting the bare PVC pipes. Solved the issue for us.

This worked great for me! Thank you for the measurements and your time making this.

Built one this weekend. Thanks so much for the video. The 15" piece across the top was a little short so I changed it to 16" and fits perfect. I used plexiglass for the middle. Thanks again. My son and his friends love it!

I used an online tool to maximize the material I had and allowed me to get all the pieces cut up with just 3 five foot long PVC. I also used high quality 1" PVC (from Lowes) and felt that was plenty wide and heavy enough to make this all very sturdy. I would recommend labeling each piece with their measurement and label with a sharpie before cutting. If you put the label at the very end of each piece, it will get covered up when you put it in the joints. STOCK PIPE #1: 21" - Strike Zone Side 16" - Base Front Leg 15" - Down 4" - Back of Base 4" - Back of Base STOCK PIPE #2: 16" - Base Front Leg 15" - Down 11" - Front of Base 7" - Off Back 7" - Off Back 4" - Strike Zone Bottom STOCK PIPE #3: 21" - Strike Zone Side 16" - Strike Zone Top (some comments say 16 is needed, mine needed around 15.5 so I trimmed this one down to fit) 9.5" - base back 5.25" - Strike Zone Bottom 4" - Strike Zone Bottom (you should have 4.25 inches left as scrap on this stock piece)

Thanks for the tips...

Just made this today. Great video, exact measurements, didn’t have any problems. Thank you🙌🏼

Great video - just built and my family and I are having a blast. One thing, I used your cut list before the build and I think you're missing two cuts. You should add another 21", another 16", and your 5 1/4 cut (I used 5). You need right about 15 ft of PVC for all the cuts. Again, thanks for sharing! Below are how I have it written down for future builds. 21" x 2 16" x 2 15" x 3 11" x 1 9.5" x 1 7" x 2 x 1 5 1/4" x 1 4" x 4

How much feet in total of pvc pipe also do you do the list twice?

Thanks for the help!!! Great video.

Thanks for the video. One thing in the dimensions cut. I would List the "strike zone downs" and add (x2), same with the base front legs. Was a little confusing with the other cuts listed as (x2)

Angelo, What's the size of the sheet metal?

I made it and it’s beautiful beyond words

Great stuff...where did you get sheet metal to cut? Thx.

My little brother and I followed your instructions and made an identical one. We're gonna use it all summer! Thanks man!

My only question is what size PVC pipe

What inch is the PVC?

would you recommend painting it before putting it together so you don’t have the worry of missing spots?

For the sheet metal did you cut it or did they have the sheet metal already in that size

45 at top angled to the back of base.

What size sheet medal would you get for this strike zone?

What are the length of the legs

Awesome video! I love the new base, I'm looking to build something similar. What are the dimensions of the final strike board?

Do you have link of what sheet metal you used? Everything I’m finding is super expensive

How many t joints and elbows would you need?

Where do I buy the pvc pipe and sheet metal from

How much did you pay for all this? Just wondering, I might build one myself!

What do we need for the middle on the strike

where do you get the thin sheet of metal

I feel like it’s a little small. But does it just look like that in the video

What size is the tin sheet?

Where did you find the metal sheet

What size sheet metal do you need

What thickness in the pvc

How much feet of PVC pipe do you need?

What are the dimensions for the sheet metal?

How many elbow and Tee joints do I need

What are the dimensions for the sheet metal

Does this take about 13 feet of Pvc pipe?

How thick is the pvc thx.

If I used 3/4 PVC Pipe would that work?

How much did it cost to buy all the materials?

Where do u get the metal?

What size was the sheet metal?

What are the dimensions for the sheet metal you used?

what size is the pipe used?

what is the size of the sheet metal in the middle

What is the list of the materials we need to make this

Should have said what lengths were being used in the building process. And you could slow the video down. It was hard to follow. And in the end I had to add extra pieces to make all of it fit.

How much do you think it would cost?

Can u tell me roughly the cost it is to make one

what size pvc is it

How much did this cost

What circumference pvc pipe did you use?

3:28

Size

How much would all of this cost?

Hey

How much would this cost ?? I want to make one but I don’t want to spend a lot

how much does this cost

Can u make one for me and ship it I’ll pay you ahead of time.

How much you want to make one for me

I heard you say your disclaimer and I'm not giving you shit. I don't know they're calling offical height but the two you had didn't seem to match up in height.