How To Make Acoustic Panels | Simple Acoustic Panel DIY Bass Trap Absorber

Рет қаралды 102,448

Жыл бұрын

TOPIC: How To Make Your Acoustic Panels - DIY Sound Absorber Bass Trap
In this video, we showed how to make your own acoustic panels bass trap sound absorbers with simple woodworking techniques that can be used anywhere. Hope you like it! if you enjoyed the tutorial, please give this video a thumbs up, subscribe, and share. You may leave a comment if you have any feedback, thoughts, or questions. Thanks for watching!
PRODUCTION COST BREAKDOWN = $36 per panel (estimated)
$7.50 = MDF for the frame
$3.50 = Plywood for crossbars
$0.50 = Glue
$0.66 = Screws
$7.40 = Rockwool Insulation
$8.99 = Duck Canvas Fabric for the front
$5.98 = Muslin Fabric for the back
$1.25 = Staples
Keep in mind that when buying these supplies, they are usually sold in packs, yards, and large portions. For example, the MDF costs $7.50 per panel but the smallest MDF is usually sold in 2ft x 4ft at $14.99 which will adequately supply for TWO panels.
CHECK US OUT: www.neptuneaudiospace.com
EMAIL US:
info@neptuneaudiospace.com
CONNECT Facebook & Instagram:
@neptuneaudiospace

Пікірлер: 130

@Scorpiokills Жыл бұрын

is it safe to say, regardless of what type of insulation you use, you will still be breathing in some of this crap into your lungs. thinking seriously about bypassing the acoustic panel thing for my theater room.

@neptuneaudiospace Жыл бұрын

We understand the safety concerns that folks have with these materials. But you should be good as long as you use a fabric like Duck Canvas. You're definitely not going to breathe in any loose particles as long as your panels stay hung on the wall without being shaken. Of course, no one's gonna go around shaking those things out intentionally. If you're still doubting the safety and want to make extra sure, you could add a thin membrane/plastic wrap before you wrap it with any fabric. This will guarantee safety 100%! Hope this helps!

@MR-vg7yn Жыл бұрын

I wrapped the rock wool in my panels in a thin plastic foil. They still work perfectly fine as absorbers. That was probably overkill, though, because as long as you don't play around with your absorbers all the time, rock wool doesn't just spontaneously blast fibers into the air. If you want to be completely sure, use sheep wool. Definitely _do not_ skip acoustic panels in your theater room. if you do that, half of the money you spend on speakers is basically down the drain.

@pillmuncher67 Жыл бұрын

You need to find a wrapping material that lets the air through nut not the fibers. I used Gartenvlies, as it's called in German. I don't really know the English word, but Google thinks it might be called Vylene. It's not very tear-resistant, so you probably need to wrap it again in some sturdier material. Burlap comes to mind.

@kersehcoca Жыл бұрын

He’s using rockwool, not fiberglass. Its safe. You can also use aglomerate poliuretane stuff and cotton waste.

@anwalt693 Жыл бұрын

@@pillmuncher67 In the US, we call it landscape fabric or weed barrier fabric. There are probably other names as well.

@theone000011 Жыл бұрын

One the best DIY videos and I’ve seen few dozens. Thank you for a very comprehensive and detailed video!

@neptuneaudiospace Жыл бұрын

Thank you so much for your kind feedback. Glad you enjoyed it!

@jimmcdougall9973 Жыл бұрын

I made my acoustic panels, almost identical to yours, about a year ago. That jig you made is excellent! Great idea for someone want to mass produce. Great video!

@neptuneaudiospace Жыл бұрын

Thanks for watching! Appreciate your feedback and for sharing your experience!

@duongthevinh19 Жыл бұрын

thank you so much❤

@rob4601 3 ай бұрын

Such a legend. Love your videos

@robert_starling Ай бұрын

Cleanest shop ever!

@vibeonthat Жыл бұрын

Great work!

@_itsjustm3_ Жыл бұрын

Best and easiest tutorial i've seen so far! (instead of all the other ones that are too techy and too much blabla) 👍👍👍

@neptuneaudiospace Жыл бұрын

Thanks for watching! We appreciate your awesome feedback!

@AndyParka 4 ай бұрын

Underrated video, this needs to be shared more

@neptuneaudiospace 4 ай бұрын

Wow, thank you for your awesome comment. We hope to get this to more viewers!

@Unknown-1709 Жыл бұрын

Very nice assembly fixture 👍

@neptuneaudiospace Жыл бұрын

Thanks for watching and for the kind feedback!

@eunaosabiamaseufiz Жыл бұрын

Excellent

@azavoiceamazighfdoux 6 ай бұрын

Good job 👍

@farfymcdoogle3461 7 ай бұрын

Love your vids! Please make one focused on different wall/ceiling mounting techniques 🙏

@neptuneaudiospace 7 ай бұрын

Noted! We'll definitely put content together for this. Thanks for the amazing suggestion!

@BuffSquadBigBenni Жыл бұрын

Nice video. A video about types of absorber-materials would be nice. Different densities, it's effect, which to choose and why.

@neptuneaudiospace Жыл бұрын

Thanks for your positive feedback! We appreciate your suggestions as well. We'll have that video coming soon! Stay Tuned!

@RestLess-MinD Жыл бұрын

Very good and informative video..next idea maybe a sound diffuser!

@neptuneaudiospace Жыл бұрын

Thanks for watching! We'll definitely make something on DIY diffuser soon.

@jeffjohnson6763 Жыл бұрын

I would love to see a vid on the process for making that jig, that was incredible

@neptuneaudiospace Жыл бұрын

Thanks for your feedback! We'll be happy to show you the process. Video coming soon!

@Devsagar123 7 ай бұрын

@@neptuneaudiospacenice

@collinscassel 6 ай бұрын

Agreed. I would like to see that too.

@x5dbose Жыл бұрын

Good video

@neptuneaudiospace Жыл бұрын

Thanks for watching!

@Scorpiokills Жыл бұрын

great vid though

@gjjust Жыл бұрын

I would be interested in buying that framing tool for my own DIY project

@gelphmullet Жыл бұрын

One of the best vids for building these. Man, can you give plans for that jig you guys made, thing is awesome. Would tremendously help with my build I am going to do.

@neptuneaudiospace Жыл бұрын

Thanks for your kind feedback! We'll be happy to send you the plan. Maybe we also can put together a video on it soon.

@vibeonthat Жыл бұрын

If this was not posted already I was planning to if you had plans for the jig, and if you were thinking of making a video on how to make it. That jig is awesome and I have so many panels to make investing the time in the jig first would totally be worth it.

@neptuneaudiospace Жыл бұрын

We will try to post the video soon! Please give us a little more time!

@nicgee1737 Жыл бұрын

Great video and nice jig. I have been thinking of using rigid foam board insulation as a frame. Its light weight and the panels would be easy to put up and take down. What are your thoughts about foam board?

@nicgee1737 Жыл бұрын

@@neptuneaudiospace I checked out your site and I liked your way of cutting out a hole in the foam board and stuffing the insulation inside. Foam boards at Home Depot are 1'' or 2'' thick, so you may need to double up and that may get a little expensive. I was thinking of ripping 3-4'' wide sections and gluing them together like a traditional sound absorber is made. You may get two or more panels that way.

@neptuneaudiospace Жыл бұрын

Absolutely, doing it the way we recommended will build up expenses. So cutting out wide sections like you said will work perfectly fine! That way, you get more for less money. Thanks for sharing your thoughts. It's such a cool idea!

@s.f.4896 7 ай бұрын

Hi there, does somebody know,if the wood fibre insulation called : "steico flex" works as well or maybe better than rockwool ? Thx for your reply ✌🏻

@mafosa9563 11 ай бұрын

this is a winter project!

@njokisasirom 8 ай бұрын

Hi, I’m planing to do some absorbers with with wood frame and acoustic rockwool inside. You say the fabriv has to be breathable to let the sound pass, but I’m afraid it will also let particles of rockwool pass trough and then we will have them in the studio?

@neptuneaudiospace 8 ай бұрын

You can add a thin layer of plastic wrap between the rockwool and the fabric. This will help keep any loose particles trapped. The only thing is the plastic wrap will reflect some of the higher frequencies which isn't a big deal in most cases. You also have the option of Recycle cotton material which is 100% safe and ECO friendly. You don't need to use plastic wraps for cotton.

@vitkosek8949 6 күн бұрын

As i understand it correctly, using a carpet instead of fabric would lead to less efficient absorption? I used it in the past and the acoustic panels covered with carpet worked alright, i'm just wondering if it could be more efficent.

@erronkrijnen1757 8 ай бұрын

hi, I can't find the article about the insulations on your website. thank you for this vid! really amazing

@neptuneaudiospace 8 ай бұрын

We're working on updating our web content soon, thanks!

@neptuneaudiospace 8 ай бұрын

Thank you for your kind feedback as well!

@nukreativemusic Ай бұрын

Great. Can you send a link to the 4" Rockwool?

@sameershah860 Жыл бұрын

Great video! I have a question. How do I make really large panels that cover whole walls without spending too much money? In a rented space where drilling is not allowed

@idkhow Жыл бұрын

Just make several smaller panels and lean them against the wall next to each other to make a large panel. They dont have to be on the wall

@swaffstudios 11 ай бұрын

Use 1x6 as the frames and they can stand upright on their own on the floor- no need to hang them on the wall. Also, if you fill the inside with 4" thick insulation up against the front of the 1x6, the leftover air gap between the insulation and the back of the panel will give you some extra low frequency absorption That's what I did and mine are all about 6 ft tall and haven't fallen in 10 years.

@joethompson5619 8 ай бұрын

Hi Neptune Audio, what thickness of your MDF board are you using? Thanks Joe

@neptuneaudiospace 8 ай бұрын

3/4 inch

@omid5689 9 ай бұрын

I need to have my own carpentry shop to able make this

@ianaintsaying1625 Жыл бұрын

Where can you buy a single package (5 to 6 pieces) of the insulation? All my local Lowes, Home Depot and Menards sell them at a minimum of 8 to 12 packages.

@neptuneaudiospace Жыл бұрын

Unfortunately, this is how most retailers sell that's usually if you try to order online. But you can try to walk in store at Lowes. They sometimes allow single purchases. We get that at our Lowes local store here.

@mendez77054ify 5 ай бұрын

Is 4 inches thick the recommended?

@Scoliosisguide 8 ай бұрын

🍏👍🏽

@pathanamthittakaran81 Жыл бұрын

Can we use memmory foam insted of rock wool?

@neptuneaudiospace Жыл бұрын

Yes, you can definitely use memory foam. Although, it may not be able to perform much on the low end. But you will certainly get a nice dampening effect overall.

@BlazhenBazeNastevski 8 ай бұрын

DIY and than they pull out tools that would never be in possession of a normal mortal, this is more of how it's made than make it yourself. Amazing work though don't get me wrong

@neptuneaudiospace 8 ай бұрын

You do have a big point right there! We'll be working on a video for those who do not have access to these types of tools. The video will feature simple crude household tools everyone has. Please stay tuned!

@BlazhenBazeNastevski 8 ай бұрын

@@neptuneaudiospace Looking very much forward

@roadracer517 Жыл бұрын

Can I just staple insulation to the wall? And do I leave the chrome foil against the wall or showing. Got it free after they built the house down the street. The pink stuff. R30 whatever that means.

@neptuneaudiospace Жыл бұрын

Sounds like you're talking about Fiberglass insulation. We recommend that you wrap this insulation in fabric before hanging it on the wall. Even if you don't want to build a frame for it, at least wrap it in fabric, using glue. Hang with Velcro or Command Strips. You can leave the foil thing against the wall. The R-value means the thermal resistance. Really has nothing to do with the sound but the heat flow.

@roadracer517 Жыл бұрын

@NepTune Audio If sound absorption works by converting sound wave energy into heat I would suspect R value has some significance.

@neptuneaudiospace Жыл бұрын

Yes, and while that is true, the R-value does not necessarily translate to better sound absorption. But rather after the sound is converted to heat, how much is the material able to regulate heat/cold flow through the seasons. Home builders look out for R-values while audiophiles look out for NRC values. Hope this helps clarify

@roadracer517 Жыл бұрын

@@neptuneaudiospace I have a crazy idea and want your thoughts...What if I built a frame and inserted random foam blocks......Could such a device be both a absorber and diffuser?

@neptuneaudiospace Жыл бұрын

Technically, that would still be considered an absorber. But if the foam blocks have high density and are rigid, and are placed at random/ mathematical patterns, they would work as an absorption/diffusion panel

@danielortizdecaracas Жыл бұрын

why do you not glue the four corners? just only screws?

@neptuneaudiospace Жыл бұрын

We don't feel the crucial need to do so at times, since we're gluing crossbars to those areas anyway. Adding glue to the corners would then be optional, as the glued crossbars already contribute tremendously to the overall strength. But if you’re not going to be adding crossbars and brackets to the corners, then it would be necessary to add glue on the corners, even though your frame strength still wouldn't be anywhere near the strength that crossbars provide.

@mastersun188 11 ай бұрын

I didnt get. How thick is the MDF? The thicker the better?

@neptuneaudiospace 11 ай бұрын

We used the 3/4-inch thick MDF for this DIY. You don't need to go thicker than 3/4 inch. This thickness already provides the perfect amount of absorption support needed for the lower frequency

@collinscassel 6 ай бұрын

How did you make those brackets!

@neptuneaudiospace 5 ай бұрын

Check out our 'Building Tips' Playlist on our homepage. You'll find the video showing how we made the brackets.

@Linkdotk 11 ай бұрын

Song name? Also great work, I must say !

@neptuneaudiospace 11 ай бұрын

Sorry, it's not a released song. It has no name for reference. We only made this track beat for use on our channel.

@Linkdotk 11 ай бұрын

@@neptuneaudiospace good stuff

@neptuneaudiospace 11 ай бұрын

Thank you! Stay tuned for more!

@MoCityDot Жыл бұрын

Where can I get this device???

@neptuneaudiospace Жыл бұрын

Sorry, which device? Do you mean the panel or the framing jig?

@LatinosGAtv Жыл бұрын

Ni un huracán destruye el panel

@acreguy3156 Жыл бұрын

According to Dennis Foley at Acoustic Fields, your method of controlling frequencies between 30-150 Hz doesn't work. Have you ever measured the results of your method? Thanks for the great video!

@neptuneaudiospace Жыл бұрын

Thanks for watching! Stay tuned for upcoming videos on this topic on how various insulation materials perform at these frequency ranges!

@acreguy3156 Жыл бұрын

@@neptuneaudiospace Thanks! I need to build panels that work in that frequency range.

@acreguy3156 Жыл бұрын

Excellent. I'd love to see what you come up with. A suggestion: Perhaps specify the frequency range your panels can handle in the video. Perhaps you did and I missed it? Apparently, if the subwoofer range is not properly dampened in a room, the mid and upper frequencies can be muddied as well.

@neptuneaudiospace Жыл бұрын

@@acreguy3156 Be sure that we'll cover these areas in our coming video! Thanks for the suggestion!

@acreguy3156 Жыл бұрын

@@neptuneaudiospace Thanks. I "Subscribed and Liked." I don't want to miss anything :)!

@gonzaljevic 11 ай бұрын

First of all. Thank you. Everything is very detailed but to the uninitiated the trimming part.of boards and explanation is too fast imo. Once again thank you for posting. Do you have a set of.written instructions?

@neptuneaudiospace 11 ай бұрын

Thank you for your comment! Unfortunately, we do not have a typical written instruction but we do have the script we used for the video which could also be followed as if you were using a written instruction. If you still need us to send this anyway, you can go to our KZfaq Channel's 'about' page; there you'll find our email address. Send us an email with the caption 'Need Written Instruction For DIY Panels', and we'll forward it to your email.

@adarshas8486 Жыл бұрын

What is the thickness of the MDF which you have used?

@neptuneaudiospace Жыл бұрын

We used a 3/4 inch

@bobjones3027 Жыл бұрын

Is duck canvas fire retardant?

@neptuneaudiospace Жыл бұрын

No, it's not

@Larsbor Ай бұрын

You should have had 1-2 cm of space behind to trap the sound.

@tubeo94 4 ай бұрын

if you find some weirdo in walmart sniffing fabric in walmart, they are not creeps, just audio engineers out of their familiar habitat finding materials.

@neptuneaudiospace 4 ай бұрын

😄

@squared80 Жыл бұрын

This video had everything except ways to hang the panel.

@jeanious2009 Жыл бұрын

Just use lots of liquid nail and hold it until it dries (sets).😂

@ArturoBeltran-he1rt 3 ай бұрын

Wow that's way too much work . Just pay extra and save time. Time is priceless.

@tangocash342 Жыл бұрын

MFD is really heavy I wouldn't use it

@ancient_death Жыл бұрын

It's not about weight if you want the best insulating panel.

@82Bjarni 10 ай бұрын

Diy acoustics needs to stop recommend glass/mineral wool.

@gabrielmateitoma8527 5 ай бұрын

Why use screws, which vibrate and add to the problem, instead of wood dowels

@neptuneaudiospace 3 ай бұрын

Wooden dowels are a good idea but the effect of the screw can be negligible. We build in bulk so time is precious.

@ferzanunlu 9 ай бұрын

I think DIY for professionals not for individuals living in an apartment. Neither this materiels will cost that less (as you spesified in the description) nor I have any of the tools that you use for cutting etc. Oh wait except sticky roller, because I have a cat.

@neptuneaudiospace 8 ай бұрын

I totally agree! You do have a big point right there! We'll be working on a video for those who do not have access to these types of tools. The video will feature simple crude household tools everyone has. Please stay tuned!

@gregjacksun 6 ай бұрын

El Duderino - if you're not into the whole "brevity" thing.

@thomasschafer7268 Жыл бұрын

Never use rockwool. Thats a joke. Look for caruso Foam!!!

@jeffdawes879 6 ай бұрын

Hmmm… maybe you should make a video…?

@noahreineke9569 4 ай бұрын

Joke

@teiomusic Жыл бұрын

What the hell is this music!? I thought I had a electric fire going on because of the high pitch sound. Also it's annoying af.

@neptuneaudiospace Жыл бұрын

Sorry how you feel about that, sir! We just love that fire cracking sound so much! Even though we knew not everyone would love the sound. Maybe went a little intense with it. You can turn down your volume if you'd like. We'll try reducing that sound for subsequent videos so guys like you can be happy!

@TheSpeedyr6 2 ай бұрын

Duck canvas are so wrong they are extremely tight weave and not transparent for acoustic fabric , thanks for fukking up my acoustic panel now I have to undo all goddamn panels and find correct fabric