How to make an Arduino-based Transmitter

Рет қаралды 81,669

Күн бұрын

I want a cheap and easy-to-make transmitter so I can make all sorts of projects remote controlled. I then took the not so easy path by designing my own from scratch. But here it is, and I love it. It also ended up looking quite cool - which is a big bonus.
In this video I'll show you how to assemble the hardware and wire all the electronic components. In the next video I'll be doing a lot of programming to make it do all sorts of cool things. So stay tuned for that.
Enjoy!
-------------------------------------------------
OVERVIEW
0:00 - Intro
0:35 - 3D Printed Parts
1:16 - Threaded Inserts
1:43 - Electronic Components
3:48 - Optional Component: MPU6050
4:20 - Modifying the Components
5:26 - Wiring
7:02 - Testing the Connections
8:02 - The Final Product
9:09 - Next Steps
-------------------------------------------------
RESSOURCES
Files for 3D printed parts:
www.thingiverse.com/thing:455...
The electronic components used in this build:
- Arduino Nano: banggood.app.link/Pwy9sbVgt8
- NRF24L01 LNA: banggood.app.link/TpfNuaYgt8
- Power Unit: banggood.app.link/NKVi9vZgt8
- MPU6050: banggood.app.link/HoQxlJ1gt8
- Joysticks: banggood.app.link/p4Sms82gt8
- Rotary encoder: banggood.app.link/s90eOc5gt8
- 9V connector: banggood.app.link/o9Vn9x7gt8
- Switch: banggood.app.link/ortPBL8gt8
- LCD: banggood.app.link/0bhPXzaht8
Schematic for wiring everything up:
i.imgur.com/8J4PJq4.jpg
----------------------------------------
Make sure to SUBSCRIBE for more great videos:
kzfaq.info?...
And follow me on Instagram to get projects updates and much more:
/ emilostuff

Пікірлер: 111

@minekrafines 3 жыл бұрын

Omg this is so cool. Please keep working on your projects, I'll be waiting to see your progress!

@N1FNE 3 жыл бұрын

Something I did on a project was to "extend" the LED light through the case by using a piece of clear 1.75mm crystal clear PETG 3D printing filament as a "light pipe" to bring the light up to the front of the case. In the design I created a small tube that extended from the front to just above the LED on the Arduino LED. The hole in the tube was about 1.75mm, and I cleared it out with a drill bit to ensure a tight fit. With the case assembled, I cut the end of a piece of the clear PETG to a clean end with a razor blade, then inserted it into the hole down to make contact with the LED. A little CA glue secured the PETG in place, and I cleaved off the filament flush with the front of the case with that razor blade. It work extremely well. The LED light is highly visible, and no soldering required to extend it, and no modification to the Arduino. Nice project. Well presented. I'm looking forward to the next video in the series.

@kulaniscap Жыл бұрын

This looks like an amazing product, cant wait to see what it does.

@TheHummingBeard 4 жыл бұрын

threaded inserts is what I needed for my 3d printed enclosures - great build overall!

@Emilostuff 4 жыл бұрын

Threaded inserts are the best! The most satisfying thing to add to a 3d printed part! Thanks a lot

@haneen3731 3 жыл бұрын

This is so well explained, thanks!

@husnainali1341 Жыл бұрын

Can't wait to see the next part of this video. The reciever part. And also testing of this project.

@aandykf 3 жыл бұрын

I really appreciate your videos.Looking forward to the next one!

@SanjayRamaswamyWolvie 3 жыл бұрын

Wow, Your Production quality is soooooooooooo good. Its very professional. Keep it up dude. The video is good. Your video skills are so good that even if there is no content I don't mind watching your videos. Hope you reach a million subs in few months

@MrZeroinside 4 жыл бұрын

Such a good video, very easy to understand and very affordable as well, cant wait for next vid, Keep it up!

@Emilostuff 4 жыл бұрын

I'm so glad to hear that! Thanks a lot!

@emmanuelchidera5968 Жыл бұрын

@@Emilostuff Please can I replace the arduino nano board with the SMT32.

@sampathbappanad 3 жыл бұрын

Bro pls make reciever part 👌👌👌 waiting

@erickendall2506 2 жыл бұрын

Thanks. Just loved your video.

@MechDickel 2 жыл бұрын

Very nice remote and vid!

@richardneal3841 6 ай бұрын

Your design is very nice in silver! Mostly done, now waiting for a part to come from Amazon. My rotory encoder mounts are different, but one screw hole is enough. Thanks

@StreamzNow 3 жыл бұрын

Love ur channel please start posting more frequently

@husnainali1341 11 ай бұрын

Bro love your design of transmitter . I would love to see the reciever part of it. We are waiting for it

@ChinthakayalaRam 3 жыл бұрын

Nicely done..

@Shyamkumar-di5fu 3 жыл бұрын

Look very nice!

@zaprodk 3 жыл бұрын

Cool project! Was the choice of battery because of space constraints? A PP3 battery doesn't contain a lot of energy (approx. 400 mAh) and not much is left when you have thrown away 45% of it in the voltage regulator. What's the actual runtime of the unit?

@PankajSharma-ch3bp 3 жыл бұрын

Sir is there any way to add an transmission indicator led to both transmitter nd receiver?

@alirezaasad8822 3 жыл бұрын

very nice and sooooooooo cool

@sumitrawat5317 3 жыл бұрын

can i use this transmitter for drone by replacing nrf24 module with 1 km range nrf24 module

@sameerahmed6264 3 жыл бұрын

can we use this transmitter to work with quadcopter based on Arduino nano R3?

@bobhammell6308 11 ай бұрын

Nice build and video! What gauge wiring is used to connect the components?

@TheFaridrep Жыл бұрын

good design :)

@aryankumarn5323 3 жыл бұрын

please tell us what are the resources that you have referred for learning electronics and Arduino

@pironiero 2 жыл бұрын

can it be used in pair with crossfire or any other popular receiver type?

@user-jl3kw2si5y 11 ай бұрын

Very nice 👍👍

@abdulr5320 3 жыл бұрын

Nice and elegant . I will definitely make me one . I was looking for 4 in 1 multi protocol diy . Could it be a good idea for a new video to update it by adding more protocols an CC2500 for example . Nice work any way . Just subscribed 😊 , thanks .

@maxhouseman3129 3 жыл бұрын

Greets from a medical engineer and hobby designer. I probably don't learn anything new, but I like your stuff and design. It is just relaxing to see your videos during lunch break 😅 Hexagon screws are looking very professional, I like it! Keep it up!

@certified-forklifter 4 жыл бұрын

awesome! :D

@Emilostuff 4 жыл бұрын

Thank you very much!

@IIT2007 3 ай бұрын

Bro can I use the lcd display to show rx and tx battery composition like in flyskyu i6?

@3dinovo2 Жыл бұрын

Ecxelente!!

@omarbentaleb6778 3 жыл бұрын

Good content, you should continue making videos

@dhijs1867 Жыл бұрын

Good afternoon! I know the video is a couple years old now but i really like your design. Im curious if you have a place where you share the code. In de video description you state plans to make a new video with the coding. Are these plans still there and is there a way we can help you publishing it?

@yurydorozhko6094 5 ай бұрын

It's simple and amazing! Very good job. When you please us with the following video with sketches and practical use of this remote control.

@rgonline001 5 ай бұрын

He's offline since 3 yrs 😢

@dylanpendlebury23 3 жыл бұрын

what gauge wire are you using here?

@haneen3731 3 жыл бұрын

Could you please share the programming and receiver part soon?

@TrackCyclingLviv 8 ай бұрын

electronics links from description are not working anymore

@strikerwow2011 Жыл бұрын

Have you programed it yet? Cuz I have no idea how to do that

@mrelnek Жыл бұрын

how to program it that it will work whit a comercial reciver ??? pls reply (im not good at eanglish)

@sindhukandekar6827 Жыл бұрын

Can this connect to the sky fly reciver

@sanjeev818 3 жыл бұрын

How to make receiver of this transmitter please tell

@seanpark2833 3 жыл бұрын

It's good quality and interesting video stuff! I have one question and request. Would you show us making 125KHz Arduino-based Transmitter?

@Emilostuff 3 жыл бұрын

Thank you very much! I'm not sure I can do that though.. :)

@ThePrentice916 Жыл бұрын

How would I add a FPV screen

@erickendall2506 2 жыл бұрын

Would you be able to do a video on creating the sketch?

@Rich77UK Жыл бұрын

What's the range like?

@satpal8022 8 ай бұрын

please provide me code for transmitter. video is very nice.👍

@ritesh_hudda. 3 жыл бұрын

What is the rang of this transmitter

@willwahlberg1890 2 жыл бұрын

I'm very suprised that the arduino could handle that amount of current. I've tried it and it doesn't work very well for me.

@user-ll4cj2gl2v 4 жыл бұрын

Nice build, although I'd recommend using embedded nuts

@Emilostuff 4 жыл бұрын

Thank you! I don't think they are necessary for securing the components. The bolts are binding very good directly to the plastic.

@plazmax 2 жыл бұрын

cool, will be part 2 ?

@razkumar8209 3 жыл бұрын

Bro can u tell me the gadgets u last used

@grelstkoning9373 3 жыл бұрын

Very nice project. I really need a 3d printer... 1 question why did you chose to short cut the positive side with a switch and not the negative, I thought this was more common

@Emilostuff 3 жыл бұрын

I dont think it should matter, but I have no good reason :)

@crckdns 3 жыл бұрын

10 months later... where is the part 2? :D but looks cool!

@Cheerscorner 3 жыл бұрын

What is the range

@jens-digitalwoodwork9852 4 жыл бұрын

As always, great Video and Content - i need a bigger printer :-D

@Emilostuff 4 жыл бұрын

Thanks a lot!

@vishal01mehra 3 жыл бұрын

You do not turn on the transmitter wothout the anteena connected. It can damage the module.

@DVN_FPV Ай бұрын

Is there a video how to programm?

@peterperryawaitey7213 2 жыл бұрын

its past one year and still haven't gotten the software for the controller. gush 😞, i guess i have to write it on my own

@omsingharjit 11 ай бұрын

What use without code !!

@user-um4ph2ul4n 3 жыл бұрын

When you make resiver ?

@istvanszucs3282 Жыл бұрын

Üdv. Milyen kóddal tudom feltölteni?

@bgrant1512 3 жыл бұрын

Are you going to do videos on coding for this and a receiver?

@Emilostuff 3 жыл бұрын

It's the plan! I just have to find the time :)

@user-bu2yp5es5v Жыл бұрын

How much its range ?

@plymouthrovadventures.646 11 ай бұрын

So were is the code part video. Nice project

@joshmellon390 3 жыл бұрын

This will be a sharp controller if you ever write code for it!

@Pushpam1995 3 жыл бұрын

Please make receiver for it and Control any intresting thing using it. I am waiting for it.

@abdelnacer7721 4 жыл бұрын

dud cane you make it with lora, long range?

@Emilostuff 4 жыл бұрын

Good idea. I'll consider it :)

@s.kaarthikranjan9468 2 жыл бұрын

Sir I need the reciver circuit sir

@VIVEKSINGH-uh3ud 3 жыл бұрын

Bro I have been waiting for next part Upload it soon 🔜

@deepikakumari7929 5 ай бұрын

6:22

@patriksjodin281 3 жыл бұрын

Nice work! Really good engineering.... but, where's the code? ;) looking forward to it.. // P

@ferdous_h 2 жыл бұрын

Hola bro. No update yet! It’d be nice. Your videos are great

@SuperFirewords 2 жыл бұрын

Good job but where is the code for this piece of plastic?

@user-yo6ip1xq1t 3 жыл бұрын

自製萬歲好手，’利害……！😄😄

@ronaldmetselaar123 3 жыл бұрын

very nice work! where can I find the code?

@merabsamkharashvili5853 Жыл бұрын

its realy eazzy. but if you cant do it you can wahe setran vidous of to cotrollor motors and servos with a controller and copy the code from there

@x-6790 4 жыл бұрын

What's the rang of transmitter?

@Emilostuff 4 жыл бұрын

Not sure yet, but probably over 100m, so lots more than I'll ever need :)

@Alihaider10109 11 күн бұрын

Will this work on any other recievers😅😅😅 I saw a video of a guy making receiver and transmitter both but I want to make this transmitter instead of his transmitter but I will make his reciever😅

@andresvelasquez3373 3 жыл бұрын

thank you so much!!!!!!!!!

@johnfrankedular9274 3 жыл бұрын

sir can you give the code? thank you

@bryan-ll7ne 2 жыл бұрын

Where's the programing video?

@vax_ta 3 жыл бұрын

please make receiver too . ok? and when?

@nicolasshields3043 3 жыл бұрын

Where's the code at?

@mukolamagon8210 4 ай бұрын

make part 2 where u program it

@ELIAS-og5vf 8 ай бұрын

Range???????

@omkarbansode6305 Жыл бұрын

Bro please if possible make it's Next Part soon

@rcpattaya230 3 жыл бұрын

Part 2???

@StreamzNow 2 жыл бұрын

WHERES THE CODE?

@vijaykumargaikwad7431 3 жыл бұрын

I don't have 3D printer

@allinonechannel7279 Жыл бұрын

Where is the Codeing video 📹👀🤔!!!?????????????

@technomena9651 3 жыл бұрын

great music , can you send music to me

@technomindsindia 3 жыл бұрын

you haven't been uploading since july... make more now......

@249TECHHUB 2 жыл бұрын

cool iI liekd I need a code

@mhadhadchanel7318 3 жыл бұрын

Part 2

@technomindsindia 3 жыл бұрын

make reciver for it..............come on!!!!!!!!!!!!!

@bgrant1512 3 жыл бұрын

OK still no code , thing is useless without the code.

@ayushzende699 2 жыл бұрын

It is a very complex circuit 👎🤮