How to make Budget Cinematic FPV Drone | DIY Full Build Video

How to make Budget Cinematic FPV Drone | DIY Full Build Video | Beginner Guide

Рет қаралды 18,471

Күн бұрын

Welcome to our first video on How to build an FPV drone in India where we walk you through each step of the process, from building it to flying it. Even though we wanted to make it a comprehensive tutorial to get started in this Hobby, this video only covers some of the basics. Yes, That is the truth. It is not easy to get into FPV. It will take several weeks of practice, knowledge in electronics, soldering, etc etc to be good at this Hobby.
In this video, We wanted to show you it is possible to do a decent build with good quality products at a budget of 50K in India. However, this is only good to get started and you could expect anywhere between 1-2 L on gears to be a professional FPV pilot.
If you would like to purchase this exact same cinematic FPV drone kit that includes everything to fly right out of the box.
www.quadkart.in/diatone-roma-...
Parts Used in this Build.
Frame- www.quadkart.in/diatone-roma-...
Motor- www.quadkart.in/vimana-2207-1...
FC/ESC Stack- www.quadkart.in/diatone-mamba...
Receiver- www.quadkart.in/frsky-vantac-...
FPV Camera- www.quadkart.in/foxeer-razer-...
Video Transmitter- www.quadkart.in/pandarc-mini-...
FPV Antenna- www.quadkart.in/foxeer-lollip...
Propeller- www.quadkart.in/gemfan-hurric...
Radio Controller- www.quadkart.in/radiomaster-t...
FPV Goggles- www.quadkart.in/eachine-ev800...
Charger- www.quadkart.in/isdt-q6-nano-...
Battery- www.quadkart.in/cnhl-black-se...
If you need any help in building an FPV drone or want to get a kit built by us, Please feel free to reach us out.
Whatsapp- wa.me/918281205193
Facebook- / quadkart
Instagram- / quad_kart
Google Map location- maps.app.goo.gl/ZSc2mLZ2LdPDw...
Timeline
0:00 Intro flying
0:44 Intro
0:56 Assembling frame
2:17 Assembling Motors
3:00 Mounting FC/ESC stack
6:10 Soldering Motors to ESC
8:46 Connecting FPV Camera
11:12 Mounting VTX
12:04 Adding Receiver
15:52 Mounting GPS
18:53 Mounting FPV Camera
22:04 Closing Top Plate
24:26 Configuring Radio Controller
25:06 Configuring Betaflight
29:05 Test flight
29:54 Build Cost Breakup
30:11 Flying footage
32:55 Winding up
#fpvdrone #fpvfreestyle #fpv #dronebuilding #diy

Пікірлер: 117

@JANGMINKUKI 5 ай бұрын

Where to order the products?

@quadkart 5 ай бұрын

All the links are given in the description, But some of the products are currently not available/outdated now. We can help you configure something better in similar budget. Feel free to contact us. Thank you

@user-ks5jh1rp6d 2 ай бұрын

I saw a really cool video. Share 👍

@quadkart 2 ай бұрын

Thank you

@deepaksarhoch1487 5 ай бұрын

Awesome. looking forward for more videos for FPV. thanks for my quad and tiny whoop. all the best.

@quadkart 5 ай бұрын

Thank you❤

@parth1340 4 ай бұрын

I like the fact that you are making fpv drones more popular in India love your products keepit up

@quadkart 4 ай бұрын

Thank you❤

@manishShukla-yx7ll 4 ай бұрын

@@quadkartwhich soldering iron are you using

@kris-kb4vf 5 ай бұрын

well done, very nice video, thanks for share😊

@quadkart 5 ай бұрын

Thank you❤

@akashsingh-fpv 5 ай бұрын

awesome video tutorial and flight footage ,, (y) loved it

@quadkart 5 ай бұрын

Thank you❤

@skywingsrc8265 5 ай бұрын

Awesome video for beginners nice keep it up guys❤

@quadkart 5 ай бұрын

Thank you❤

@ajishtm4306 5 ай бұрын

Awesome video ,liked it

@quadkart 5 ай бұрын

Thank you❤

@prashantss4199 5 ай бұрын

Nice video ,all the best

@quadkart 5 ай бұрын

Thank you❤

@jithinjayaraj2000 5 ай бұрын

Nice one 🤩🤩🤩❤❤❤❤clean build❤

@quadkart 5 ай бұрын

Thank you❤

@davidhuirem229 5 ай бұрын

❤❤❤

@quadkart 5 ай бұрын

❤

@haseenaasharaf3034 5 ай бұрын

👌🔥

@quadkart 5 ай бұрын

Thank you❤

@sameerpiwalatkar7473 5 ай бұрын

Awesome ❤

@quadkart 4 ай бұрын

Thank you❤

@platazomb1931 3 ай бұрын

Loved the efforts❤❤

@quadkart 3 ай бұрын

Thank you

@darkdjimax. 5 ай бұрын

Nice video bro❤️

@quadkart 5 ай бұрын

Thank you❤

@mechrule27 5 ай бұрын

Nice build keep this going on❤

@quadkart 5 ай бұрын

Thank you❤

@lokaero 5 ай бұрын

Amazing quadkart!, hope you guys will release more pnp drones soon on your website.

@quadkart 5 ай бұрын

Thank you❤

@Sufiyan-teacher 5 ай бұрын

❤❤❤❤❤

@quadkart 5 ай бұрын

Thank you❤

@muhammedsalmanali8852 5 ай бұрын

Nice one

@quadkart 5 ай бұрын

Thank you❤

@Ras-ob4hc 5 ай бұрын

Nice🎉🎉🎉❤

@quadkart 5 ай бұрын

Thank you❤

@moinurath6486 5 ай бұрын

Nice tutorial

@quadkart 5 ай бұрын

Thank you❤

@_artbynitin. 3 ай бұрын

Sir i have a problem with making drone I have already purchase drone parts and assembled perfectly but problem facing in betaflight arming disabled showing and in betaflight configuration reciver tab spinning automatic

@quadkart 3 ай бұрын

Hello, Kindly message us on Whatsapp. We will help you troubleshoot it.

@Openminded-wf2nn 27 күн бұрын

What is difference between dji 3pro and this drone ,what are the advantages we get building our own

@InsPage-nl4rn 3 ай бұрын

Hey i have one question, can DJI camera air unit O3 paired with DJI GOggles V2 work with any drone build?? i mean can any drone build with any system work with this Camera and Goggle set or we need to go completely DJI to make it work ?

@quadkart 3 ай бұрын

Yes, You can use any controller. DJI O3 has built in receiver that can be used with DJI FPV Controller. It is a benefit if you already have DJI FPV Controller. If you would like to use an external controller along with DJI FPV controller, You will have to switch between the receivers in betaflight each time. Plus you will have to solder additional receiver for the external controller.

@manishShukla-yx7ll 4 ай бұрын

which soldering iron and screwdriver kit are you using pls tell i am looking forward to buy stuff related drone building from your site cuz i am starting to make a digital fpv drone

@quadkart 4 ай бұрын

Hello, We are using Sequre D60A soldering Iron in this video. But we will not recommend it. You can go for a good soldering station depending on your budget. We are using TBS Hex drivers.

@jigyashnashine7328 5 ай бұрын

Bro nice video make that bundle in stock plz

@quadkart 5 ай бұрын

There was only one unit available which was used in this video. But we can get you something in similar budget. Kindly contact us if you are interested. Thank you

@karmasabitch69 5 ай бұрын

🎉

@quadkart 5 ай бұрын

❤

@kiranjotsinghmalhotra 3 ай бұрын

Bro I am about to but simulator for fpv practice. Can you suggest reliable and affordable controller? I will be using this setup on windows PC.

@quadkart 3 ай бұрын

Hello. You can go for Radiomaster Pocket or Radiomaster Boxer depending on your budget. These are the two good radios available out there. Thank you.

@kiranjotsinghmalhotra 3 ай бұрын

@@quadkart Thanks 👍. Can you also suggest me where can I buy it from? (Looking for trusted source)😅

@tsshadowff Ай бұрын

What's the range of panda rc vtx and ev800d goggles?

@quadkart Ай бұрын

Range depends on many factors inlcuding but not limited to, Antenna, Antenna orientation, Output power, Environment etc. In open ground, we got morethan 1km video range. But in environments with many interference, and obstacles range will be poor and it may not be morethan 200meter.

@avinashthakur80 Ай бұрын

I'm planning to build one, but to reduce the price further, I'll try to use a cheaper transmitter like Flysky FS-i6x and skip goggles for mobile phone (with a video rx). Hopefully this alone will cut ~15k. Any suggestions further?

@quadkart Ай бұрын

We will never ever recommed FS-I6X. This will be a very bad idea. You won't be saving any cost, But wasting money twice. Instead go for any ELRS controller, like Radiomaster Pocket which you can get for around 6K in India. For goggles, No need to get EV800D, You can go for cheaper version EV800 or a basic goggles like VR100. The mobile + OTG receiver won't work good if you plan to use it as FPV Goggles. If you want to cut cost; 1.Go for a cheaper frame like Martian II or Apex clones 2.Go for a cheaper stack like HGLRC Specter F460 3.Consider buying Radiomaster Pocket 4.Change FPV Goggles to EV800 5.Change charger to ToolkitRC M6 V2

@AnupamPanda-iq6to 3 ай бұрын

Which battery do i require to get a flight time of atleast 15-20 mins?

@quadkart 3 ай бұрын

Hello. You can use a Liion Battery Pack to get more flight time, Or use Li-Po that has more capacity like 3000Mah. But you will be compensating perfomance over flight time. You can only get around 5 minutes with the best perfomance. Using Higher capacity or Liion will get you more flight time, But it is only good for cruising. Thankyou.

@outspokenritik 2 ай бұрын

Tittle : Budget FPV Drone The budget : 50,000 INR I want this confidence

@akroidofficial 2 күн бұрын

dji comes cheaper than that

@athul6432 5 ай бұрын

Poli brohhh❤

@quadkart 5 ай бұрын

Thank you❤

@bhs_742 3 ай бұрын

What is the range of this fpv and what is flight time?

@quadkart 3 ай бұрын

Flight time is around 5 minutes, Range depends on many factors including the environment. In open ground, You can get around 1km range. We have tested for around 1km. But if there are obstacles, then range can be as low as 100m or less. Thank you

@Xavierfun12345 5 ай бұрын

How much range the goggles or video transmission

@quadkart 5 ай бұрын

Range depends on many factors inlcuding but not limited to, Antenna, Antenna orientation, Output power, Environment etc. In an open ground, you can get morethan 1km video range. But in environments with many interference, and obstacles range will be poor and it may not be morethan 200meter.

@DRAGONFPV-7666 5 ай бұрын

GOOD BUILD BRO PLEASE BUILD DIGITAL ONE AND TELL TOTAL COST 🌪️

@quadkart 5 ай бұрын

Sure, We will do a digital build kit next.

@user-wd2ov2bo4r 2 ай бұрын

Am a dji cinematic drone user. Have a great interest to change to fpv custom build. But have a doubt,what happen when transmitter and receiver out of range while flying. What will happen to drone.

@quadkart 2 ай бұрын

Hello It is called a fail safe. If you have GPS on it, then you can configure Return to Home function in it. Else, drone will fall out of the sky or will land there according to your fail safe configuration. Thank you.

@princerozario9788 2 ай бұрын

Are you thinking to get fpv drone?

@tsshadowff Ай бұрын

I have a fpv drone with your parts! But i have a problem My goggles range is only 150m with full power of vtx (800mw) EV800D goggles and Tmotor ft800 800mw vtx.

@quadkart Ай бұрын

Kindly send us message on our whatsap with more details. We will help you out.

@lforlyrics4990 Ай бұрын

TOTAL COST WITHOUT THE FPC GOGGLES AND THE GO PRO? LOVE U BHAI

@quadkart Ай бұрын

Hello Without goggles, It will be around 36K.

@Nomadicbhaiya 3 ай бұрын

From where we got this

@quadkart 3 ай бұрын

Hello, You can contact us on Whatsapp. Thank you.

@user-py2mm3xt5i 4 ай бұрын

bro how much did it cost to build this pls tell bro. btw the clip was nice.

@quadkart 4 ай бұрын

Total cost is 50K. Thank you

@itskafilm 4 ай бұрын

Cinelog 35 stock me kab ayega?

@quadkart 4 ай бұрын

We have parts to build Cinelog 35 V2 now. Please contact us. Thank you

@rahulranjan8365 Ай бұрын

maximum altitude it can go?

@quadkart Ай бұрын

It has no altitude limit. It should be able to go as much height as range it can have. Thank you

@amitlkr 5 ай бұрын

Where are you located .. if i need to build one .

@quadkart 5 ай бұрын

We are based in Kerala. Store location is given in the description.

@Madarauchiha329-r1n 3 ай бұрын

Bro are fpv googles necessary?

@quadkart 3 ай бұрын

Yes, They are necessary to get the Live feed from goggles.

@Madarauchiha329-r1n 3 ай бұрын

@@quadkart but bro if we use gopro , we can use its app to get the live footage.... Can't it be the alternative of googles ?

@ThePieSnatcher Ай бұрын

@@Madarauchiha329-r1n no even the smallest amount of research wouldve explained this to you

@bedanta840 9 күн бұрын

Camera analog or digital?

@quadkart 8 күн бұрын

It is Analog.

@abhijeetbara5610 5 ай бұрын

Whats the flight time?

@quadkart 4 ай бұрын

With Gopro Hero 9, It is around 4-5 minutes.

@abhijeetbara5610 4 ай бұрын

@@quadkart Is it possible to increase the flight time with 4s battery and gopro

@quadkart 4 ай бұрын

@@abhijeetbara5610 Yes, You can improve flight time by using Li-ion battery instead of Li-Po. But by compromising perfomance. Normal flight time with best perfomance for 5" FPV Drones is around 5 minutes or less.

@rajputgamer3871 2 ай бұрын

Bro can you built me same drone . I want to purchase the drone

@quadkart 2 ай бұрын

Yes, We can do. Kindly get in touch with us on Whatsapp. (8281205193)

@SuccessLibrary236 2 ай бұрын

Where are you from?

@quadkart 2 ай бұрын

Hello We are from Kerala, India.

@SuccessLibrary236 2 ай бұрын

View is amazing

@quadkart 2 ай бұрын

@@SuccessLibrary236 Thank you :)

@sartazalom540 4 ай бұрын

Can you build for me ....?

@quadkart 4 ай бұрын

Yes. We can do. Please contact us on whatsapp (8281205193). Thank you

@princerozario9788 4 ай бұрын

Have you build it

@user-xq7dq6zi6h Ай бұрын

most of the parts are out of stock

@quadkart 29 күн бұрын

Hello There are better components available now. Contact us if you would like to get one built or get a kit to build one. Thank you

@a2ml117 3 ай бұрын

Mikka sathanayum out of stock anallo... :(

@quadkart 3 ай бұрын

Hello Ithile mikka parts um almost oudated aanu. Updated aayitulla better components ippo available aanu. Whatsap il DM cheydal details share cheyyam.