Рет қаралды 277,978
SOCIAL NETWORKS: Instagram / Nicolas.gtz
** The process is explained in the video **
+ The taps can be obtained at any hardware store or tool store!
THE PROCESS for making dowels with dies consists of 3 steps:
1. Cut from wood to square sticks
2. Rounded
3. Sanding
*SPECIFICATIONS:
With the 11x11 mm stick you can make dowels from diameter 10 mm to 3 mm.
With the 9x9 mm stick you can make dowels from diameter 8 mm to 3 mm.
**SPECIFICATIONS:
- To make a 10mm dowel: I need an 11x11mm square stick and use the M12 tap.
- To make an 8mm dowel: I need a 9x9mm square stick and use the M12 and M10.
- To make a 6mm dowel: I need a 9x9mm square stick and use the M12, M10 and M8.
- To make a 4mm dowel: I need a 9x9mm square stick and use the M12, M10, M8 and M6.
- In the same way in the following diameters