How to make EPOXY FILLETS easy!

No video

How to make EPOXY FILLETS easy!

Рет қаралды 91,403

Күн бұрын

Here are the steps Wooden Boat Dan uses to make Epoxy Fillets for boatbuilding. This is a step by step video from preparing to fillet, through the full fillet process. NOTE: I did not precoat the fillet area with unthickened epoxy. West Systems recommends do this to get the strongest fillet. Enjoy!

Пікірлер: 28

@wallacegrommet9343 6 жыл бұрын

Your calm focus and organized approach are keys to quality work

@WoodenBoatDan 5 жыл бұрын

Thanks Wallace! Keep calm and carry on :D

@zooknut 10 жыл бұрын

Thanks Dan, very informative. I use the wife's cake making supplies also. One thing I might ad though, get a longer piece of PVC pipe to use as your roller to push the mix down the bag. They can also make good fillet tools as well. Cheers for the video, Nick.

@WoodenBoatDan 10 жыл бұрын

Dave - I used the mixture that Russell Brown recommends - 2 parts 406, 2 parts 407 and 1 part 404. It works great! Dan

@walkertongdee 7 жыл бұрын

Nice lookin good instruction. I move fast and use more but very good for someone to learn. This is the way to do it folks.

@WoodenBoatDan 5 жыл бұрын

Thanks!

@desmondmarais6895 3 жыл бұрын

Very neat job well done.

@WoodenBoatDan 3 жыл бұрын

Thanks Desmond!

@ryannavarre4161 6 жыл бұрын

thanks for the roller tip.

@WoodenBoatDan 5 жыл бұрын

You're welcome (a little late :D).

@randomly-genrated 8 жыл бұрын

awesome!

@WoodenBoatDan 11 жыл бұрын

I will get to it eventually :D

@davebeckleo 9 жыл бұрын

Excellent video. Just getting ready to start fillets on my 18' Simmons Sea Skiff motor well. I'm curious about the wood fillet tools and stir stick and the de natured alcohol. Does soaking the stick prevent sticking? It looks like you are able to reuse all of them, but I can't even seem to keep the purpose made plastic sticks clean fro more then a few uses.

@WoodenBoatDan 9 жыл бұрын

Glad you like it David! Soaking the fillet tool (stick) does not prevent the epoxy from sticking. The trick is to clean your fillet tools immediately after use, and use denatured alcohol is needed. With the wood fillet tools, you can resand them again and again to keep a clean edge. Best, Dan

@msimpso99 7 жыл бұрын

What is the filler material made out of? loved the video!

@WoodenBoatDan 5 жыл бұрын

1 part 404 High-Density; 2 parts 406 Colloidal Silica; 2 parts 407 Low-Density (I use West Systems).

@cawfeedawg 7 жыл бұрын

you can also just cut the corner off a ziploc.. instead of the pastry tip thingy.

@turboflush 6 жыл бұрын

Cawfee Dawg If mix is thicker... it will squish the bag opening bigger.

@olegahg 11 жыл бұрын

Dan, You should use your canon for video.

@petejohnson1724 8 жыл бұрын

Ps freezer bags work as well

@WoodenBoatDan 5 жыл бұрын

Yes they do!

@boochieboy814 6 жыл бұрын

can you use epoxy fillets when using polyester resin and fiberglass over top?

@WoodenBoatDan 5 жыл бұрын

I have not tried that. Chemically it might not work properly and could cause problems

@Waynemanner 6 жыл бұрын

Nice video! One question. Can that also be used like Bondo that can be easily sanded?

@WoodenBoatDan 6 жыл бұрын

It does not sand easily Al. It is hard stuff!

@Dave51262 10 жыл бұрын

Dan - which West filler do you use for filleting? Is that 404 High Density or 407 Low Density? I did not hear it mentioned. Thx.

@joemartinez9915 6 жыл бұрын

What is the filler made of

@WoodenBoatDan 6 жыл бұрын

The filler is a proprietary material from West Systems. A combination of their Hi Density, Low Density, and Colodial Silica filler.