How to make fabric tumblers with hidden seams

No video

How to make fabric tumblers with hidden seams

Рет қаралды 20,154

4 жыл бұрын

HEY!
In this tutorial I show you how I make my tumblers. If you'd like to see how I made my Tumbler Template click here - • How To Make Tumbler Te...
Below is a list of the supplies I use:
Epoxy- amzn.to/2L6cO5P
FIFO Bottles for epoxy- amzn.to/3f3WIGM
Blades- amzn.to/2WBUNlw
Permanent marker- amzn.to/2YCDTWn
Mod Podge- amzn.to/2YCSD7v
Condiment bottle- amzn.to/3cNfQHF
Paint Brush- amzn.to/2WtjnVz
Popsicle Sticks- amzn.to/35BAJUr
Electrical Tape- amzn.to/3dipsLd
Medicine cups- amzn.to/35xFqP0
Nitrile Gloves- amzn.to/2L6f11j
Sand paper- amzn.to/2YFIN4S
Heat Gun- amzn.to/2L0d0Ue
Torch- amzn.to/2zahGEy
Ruler- amzn.to/2zVLcOu
Glitter- bit.ly/2XCaN60 (GET 5% OFF WHEN YOU ORDER WITH THIS LINK)
Fabric is from Backstitch Fabrics on Facebook (Search for that group name)
Glitter is from The Glitter Guy (Can also be found on Facebook)
Tumblers are Hoggs (The stainless depot)
FOLLOW ME:
FACEBOOK: / craftyytwist
INSTAGRAM: / craftyytwist
(Amazon links are affiliate links. You don't pay to use them but I get a percentage for the orders placed with them)
Music- • Video

Пікірлер: 87

@melissabrown3402 3 жыл бұрын

Very informative thank you !!!!

@yvettepierce4310 3 жыл бұрын

Excellent tutorial thank you 😊

@fatimahuerta1102 2 жыл бұрын

Very informative video. Great Job! Loved it!

@christyowen4440 3 жыл бұрын

Wow your videos are amazing and your product is so cool! Thank you for sharing

@judichristopher4604 Жыл бұрын

OH MY GOSH.... YOU are a Genius... I wanted to do this for my Acting Studio and give out to each student (for free)... but hated that super sharp line... This is GREAT... Thank YOU... YOU are a God-Send...

@anncobb1195 2 жыл бұрын

You a very good teacher. Can you tell me where you get your plastic templates

@anncobb1195 2 жыл бұрын

I cannot express what a so informative tutorial this has been. Thank you so much. I’ll be watching more

@joansartori1859 3 жыл бұрын

This is one of the most informative tutorial on a fabric tumbler that I have seen, thank you for sharing!

@rochel1979 3 жыл бұрын

This is the best tumbler tutorial I’ve seen!! Your camera angle is everything! Your attention to detail and helpful hints are amazing!! Thank you so much!!

@tracytop5458 3 жыл бұрын

Thank goodness someone finally sees the seam... I e always been weird about seams on fabric Ron the point I won’t buy it if it’s not matched!!!! Tytytyty❤️

@valerielowes4303 3 жыл бұрын

Your video is by far the most helpful I have seen. Great work and great ideas x

@ratmgr2 3 жыл бұрын

Since you have so many popsicle sticks to go through before you switch to metal stir sticks (to reduce bubbles), you can let a stick dry with epoxy on it (scrape off the excess). This will seal the wood and then the next time you use it, it won't create all the bubbles. Great tutorial, especially the fussy cut seam.

@stacyq374 3 жыл бұрын

This was so so helpful and you actually explain the reasoning behind things. I can't thank you enough!

@galvestonwaves 4 жыл бұрын

I've been watching these tutorials of a few days now. Everyone says "Be sure to mix you epoxy well", you're the first one to explain the streaks. Thank you. Your cup looks awesome.

@CraftyyTwist 4 жыл бұрын

I had trouble with my epoxy in the beginning because of the streaks.

@CopperHueCollectionsChippewa 3 жыл бұрын

Your makeshift blade is an excellent idea, you didn’t have to spend all that money buying that blade trimmer thank you!

@amuunscraft2943 3 жыл бұрын

The BEST tutorial yet! Thank you so much! 💜

@becco03 4 жыл бұрын

I like the tip you showed on cleaning the top. I’ve never see anyone heat it up and the blade. Very helpful. Great job!!

@adbjmom 3 жыл бұрын

Love this! Glad to see someone making use of popsicle sticks like I do!

@channahsismoxz7231 3 жыл бұрын

What an excellent video! Thank you so much for sharing this fussy cut technique. I can't wait to create my first seamless tumbler.

@brendarusso1338 3 жыл бұрын

Great video!!! Thank you for also sharing how you trim the material at the bottom and top with the razor!!

@artislife2621 3 жыл бұрын

You did a great job with that tumbler.

@lolitascreations 4 жыл бұрын

Thank you so much! You’re tutorial was a lot of help.... Great video!!!

@tkoesq 4 жыл бұрын

I love your homemade edge trimmer!

@veronicamanjarrez7580 3 жыл бұрын

I'm a new subscriber. Thank you for explaining the step by step process. I really enjoyed it.

@rhondawheeler7894 4 жыл бұрын

This tutorial was TERRIFIC and EXTREMELY HELPFUL, especially the cleaning of the rim at the end. Thank You for this.😊

@lakishawilliams6836 4 ай бұрын

Beautiful work. I’m just starting my business and I do use fabric on my cups. Do u have any idea for lil boys cup to help cover up the seamless instead of ribbons?

@evonbrooks6874 3 жыл бұрын

This is a great tutorial! Keep going girl! 🤗

@asuncionmena9062 3 жыл бұрын

I really love your tutorial

@susanlaukat3834 4 жыл бұрын

This is fabulous! I have been thinking about buying the edge trimmer, but I didn’t want to spend the money with it having mixed reviews. I’m glad you shared your idea! I have watched so many tutorials for using fabric and yours makes the most sense to me. I love the template idea...cutting the excess at the seam is intimidating to me. Videos may be new to you, but your explanations are top notch. And I totally LOLd at your 10,000 popsicle sticks comment 😂

@CraftyyTwist 4 жыл бұрын

Thank you so much! I remember when I started how intimidating the whole fabric tumbler videos looked to me so I tried to make them as easy as possible for me. The templates also help me decide the best part of the fabric to be in the middle every time. It’s definitely saved fabric and time. Hopefully soon I’ll run out of popsicle sticks LOL

@elviralopez4352 3 жыл бұрын

Very Very Helpful, thank you so much.. loved the video

@juanitayoung7541 3 жыл бұрын

This was GREAT!!! Thank you!!!

@cynthiabrewer8103 3 жыл бұрын

Great video!

@kristinaduffy5377 3 жыл бұрын

Really great tutorial! Do some more - you've got a follower!!

@claramejia7693 4 жыл бұрын

Wow! Beautiful and good job 👏 👏👏 👍😍💗

@yolandatrevino2554 3 жыл бұрын

You are amazing!!!

@kalaelizabeth5638 3 жыл бұрын

Was this stargazer from TTG? Thank you for the tutorial, new subscriber here.

@CraftyyTwist 3 жыл бұрын

Yes it is from TGG! And thank you 💖 I’m trying to make other videos for here.

@clarissaharris5345 11 ай бұрын

What kind of fabric is this ??

@jenniferjasso5947 2 жыл бұрын

can plastic tumblers be used with epoxy? i know acrylic can but im not sure about the plastics.. I was gifted a huge lot of plastic tumblers and am just wondering.

@lucygutierrez2968 3 жыл бұрын

U can put a thin book or note pad down to rest your hand on it while cutting around the rim so it can be even around and lifted enough to just cut both ends of fabric evenly off on both ends of the cup .

@jonellejacobs2934 4 жыл бұрын

Perfection 😍

@sylviajoiner9196 3 жыл бұрын

Enjoyed your video. Thanks for sharing. You are so easy to understand. What fabric can you use?

@deniseberg1435 3 жыл бұрын

You did a great job making the video it was very informative and was easy to follow. What is the name of your shop and where do you sell your tumblers at?

@missKinaDee 4 жыл бұрын

Which sand paper number do you use?

@eeeejay1000 3 жыл бұрын

Thank you for sharing ! How do you keep the glitter from spreading when adding the last layer of mod podge ?

@Qui7422 3 жыл бұрын

Do I have to use epoxy? Will dishwasher safe modpodge work. Or spray accrylic?

@sugarskulls3597 4 жыл бұрын

Great video. Will you please make one with Mod Podge method?

@tabithaswann9824 4 жыл бұрын

On your video 5:48 when you laid down the fabric, mod podge it, you didn’t cut off the access you over lapped. You don’t see a hump/bump?

@AA-bf7vn 3 жыл бұрын

I am starting to make fabric tumblers and I have done a couple but the fabric is coming off i am adding 5 coats of mod podge and 5 coats of crystal bright does anyone know what can be the issue?

@CraftyyTwist 3 жыл бұрын

If you’re using crystalac products you’re not supposed to use modpodge. They have a special glitter glue that you can use that works with their products. That may be why you’re having issues with the fabric.

@AA-bf7vn 3 жыл бұрын

@@CraftyyTwist thank you! do you happen to know the name of it?

@CraftyyTwist 3 жыл бұрын

It’s called ‘glitter glue’ and the company crystalac makes it. You can also use E6000 spray glue.

@AA-bf7vn 3 жыл бұрын

@@CraftyyTwist thank you!!!!

@CraftyyTwist 3 жыл бұрын

You’re welcome! Let me know if you have any other questions.

@denisealston2581 3 жыл бұрын

I can't wait to use your technique! How long did you let your 1st coat of epoxy cure before you sanded the edges?

@CraftyyTwist 3 жыл бұрын

I usually wait 18-24 hours. I’ve tried after 6 hours and it didn’t turn out well.

@denisealston2581 3 жыл бұрын

@@CraftyyTwist thank you for the information!

@Gothamhomestead 3 жыл бұрын

How long do u have to let it spin per each time u do epoxy?

@larsonburger 3 жыл бұрын

Where do you find a turner?

@bobbyrae9486 3 жыл бұрын

Hi Stephanie, I’ve never made these before, did you make the Turner or buy it?

@gracewiesen7047 3 жыл бұрын

Can you tell me where you get your tumblers?? Thank you.

@puertaamezquita8858 3 жыл бұрын

Hi. I loved this tutorial. What kind of fabric do you recommend for tumblers? Would you recommend also to buy the tumbler cut fabrics or not pre cut and cut it myself? Thank you

@CraftyyTwist 3 жыл бұрын

Hello! Thank you so much! For starters I definitely recommend cotton lycra fabric. Once you get the hang of it you can also use woven but there’s no stretch to that so it’s just a little harder to work with. If you can buy the fabric by the yard it’s definitely cheaper than tumbler cuts but if you only need one or two of that print then you can definitely just purchase the tumbler cuts.

@puertaamezquita8858 3 жыл бұрын

@@CraftyyTwist Hi. Thank you so much for the information so helpful. Appreciate the time you took to reply means a lot. I been looking at Etsy and they have some variety but in tumbler cuts 9x14. I need to keep looking if there is other sites with more variety.

@CraftyyTwist 3 жыл бұрын

@@puertaamezquita8858 I purchase all my fabric from Facebook groups. If you have Facebook I highly recommend joining fabric groups there. Some of the good destash groups are “custom knit fabric BST” “Disney fabrics BST” “custom Disney fabric BST” you can find fabrics from lots of groups there and you can ask where the fabric is from. Some of my favorite fabric groups off the top of my head is “Backstitch Fabric” (that’s where this print came from) “HAPA fabrics” “Miss Mac Fabrics” “Oh So Pretty Custom Fabric” “MandM Fabric” “MK Designs”

@puertaamezquita8858 3 жыл бұрын

@@CraftyyTwist thank you soooo much. I will go ahead and create a facebook to look into this. Thank you

@marygasseling3639 3 жыл бұрын

Can you use Brite Tone instead of epoxy? I get bad headaches using epoxy.

@CraftyyTwist 3 жыл бұрын

I actually just Ordered BT. I can make another video when I get the hang of it. It should get here this week.

@marygasseling3639 3 жыл бұрын

@@CraftyyTwist Thank you. I look forward to learning from you.

@mariamorieko7008 4 жыл бұрын

great video..im wondering though, what kind of profit can you make here, between the cost of the tumbler and then the amount of your time to make one

@CraftyyTwist 3 жыл бұрын

There’s some tumbler makers out there that make a lot from tumblers. This is mostly a hobby for me while I’m home with my son.

@danielleskaggs5399 3 жыл бұрын

Where do I find this style of fabric ?

@CraftyyTwist 3 жыл бұрын

This is from Backstitch Fabrics on Facebook.

@beautyydee01 3 жыл бұрын

Can we use any type of fabric?

@CraftyyTwist 3 жыл бұрын

beautyydee01 I use Cotton Lycra or woven.

@michaelaelise3693 3 жыл бұрын

What kind of fabric is this?

@CraftyyTwist 3 жыл бұрын

This one is cotton lycra.

@amyfetters9687 3 жыл бұрын

where can I find the templet ?

@CraftyyTwist 3 жыл бұрын

I make the templates for each size. I have another video on how I make the templates, after you watch that if you have any questions let me know.

@tracytorchon7762 4 жыл бұрын

Why do you need to sand the cup?

@CraftyyTwist 4 жыл бұрын

In the beginning? Prepping the cup helps the fabric and glitter stick to the stainless steel. I sand after epoxy so I use less epoxy to cover the uneven areas of where the glitter is.

@tracytorchon7762 4 жыл бұрын

Stephanie thank you.

@RainorShine1 3 жыл бұрын

I have fabric that I would love to have you talented lady to make me some tumblers if that is possible.

@CraftyyTwist 3 жыл бұрын

That means so much to me! I’m currently closed for the month of December but once I’m back open I can definitely do that for you. I offer a $5 off each fabric piece you send per cup.