No video
how to make - fiberglass bumper part 3 : fiber glassing the Plug.. custom jeep WJ build vlog 7
Рет қаралды 66,222
Күн бұрын
@nedanother9382 Жыл бұрын
Man I'm not even done this video .....I thought you were straight up nuts with your approach to this....damn I'm eating my words. Definitely a strange approach but VERY effective. The foil tape is just crazy good. It makes sooo many things better. I've typically sprayed super 77 from 3m and install foil on it. The tape at the edges would be golden. Is it safe to assume the clay was dry before you taped it? Or was it the oil type clay that doesn't harden. I'm going to be building a faux vw bus in the next couple months with a foam base....the window detail and trip will be made so much better with the clay. Thanks for the tips.
@TheInkhousecustoms Жыл бұрын
@Neda Nother it is an non drying clay made specifically for automotive applications. It's soft when heated and firm when cool perfect for tooling.. I try to use common tools in my videos so everyone can feel these job are achievable without spending alot of money. Thanks for the comment, i appreciate it.
@TIMBEAU1962 3 жыл бұрын
I only wanted to make a windscreen for my motorcycle! And after following your video’s I truly feel so stupid! Sir you are God! Thank you so much for sharing!
@TheInkhousecustoms 2 жыл бұрын
Hey just remember its humans that make things.
@clintonbusby5655 2 жыл бұрын
I'm a fabrication guy, born into plumbing..love moding everything!To the pursuit of our visions! Please continue sharing this one with us to fruition
@TheInkhousecustoms 2 жыл бұрын
@Clinton Busby thanks bro, trying my best to keep motivated on this build.. its alot of work, but it will get done..i will be jumping back on the build. Thanks. 👊🏾
@Blackinterceptor999 2 жыл бұрын
I gave it a like as soon as I saw that he was wearing gloves....I dislike it when folks show working with fiberglass and they aren't wearing gloves....You only got two hands....Better protect them!!!!
@TheInkhousecustoms 2 жыл бұрын
@Jay American you damn right we only have two hands, you must wear your PPE. You gave it a like, but did you give it a SUBSCRIBE!! And set the 🔔 to ALL!! appreciate your comment, and appreciate you. Thanks
@larryhill6989 Жыл бұрын
SUBSCRIBED!! Sir, your work is astounding! Thank you for doing these videos so we can come along for the ride!
@TheInkhousecustoms Жыл бұрын
@Larry Hill Bro I appreciate the SUB and comment. I will keep the videos coming.
@nicholashuber2043 3 жыл бұрын
Nice
@TheInkhousecustoms 2 жыл бұрын
Thanks
@ahmedeldeeb7608 3 жыл бұрын
Awesome bro I’m so excited to see the final shape
@TheInkhousecustoms 3 жыл бұрын
Thanks for the appreciation 🤙🏽👍🏽💯
@capt_beefheart4159 3 жыл бұрын
Nice work, great instructions. Thanks!
@TheInkhousecustoms 3 жыл бұрын
No problem
@arroyorealty 3 жыл бұрын
I cannot wait to see the finished product
@yosielbejerano424 3 жыл бұрын
excellent work i am eager to see the end please keep making videos thanks
@TheInkhousecustoms 3 жыл бұрын
@Yosiel Bejerano i sure will keep them coming!! thanks
@4k_custom 3 жыл бұрын
bro your doing an awesome job , keep it up !!!!
@TheInkhousecustoms 3 жыл бұрын
@4k custom Thanks for the comment, they help me want to continue working on my builds.
@4k_custom 3 жыл бұрын
@@TheInkhousecustoms u got a fb or ig . I want u make me somthing , trying to see how much
@TheInkhousecustoms 3 жыл бұрын
Yeah Instagram @ Theinkhousecustoms
@matt23falcon 3 жыл бұрын
looking tough! Awesome work
@TheInkhousecustoms 3 жыл бұрын
Thanks fornthe positivity 🤙🏽💯
@hoga8478 Жыл бұрын
I just found you. Good job. I think you could use a tape sponsor. I'm watching the wj now.
@TheInkhousecustoms Жыл бұрын
Lol, you was searching for me! I might need to hit up 3M for all the tape I waste on this build. Thanks for the comment 🤙🏽
@hoga8478 Жыл бұрын
@@TheInkhousecustoms I wasn't looking for you specifically. But I am wanting to build a door card... what do you recommend for resin? I will be building on it a couple times. I dont want to grind each time
@TheInkhousecustoms Жыл бұрын
Well each resin has its properties, I use fiberglass resin for : rigid parts, ease of use, and fast dry times. Epoxy resin for : adhesions, flexibility and durability So what every fits the properties you want for your applications.
@monstersquashracing 3 жыл бұрын
This is so cool man, keep it up👌👌👌👌👌
@TheInkhousecustoms 3 жыл бұрын
Thanks for the motivation!!
@anhkhoitran7011 3 жыл бұрын
this''s perfect product !
@TheInkhousecustoms 3 жыл бұрын
Thanks
@BenTV73 2 жыл бұрын
Good work dude! Is the clay you're using an air drying clay? May I suggest in future sealing the clay with G4 pond sealer give it a flat down then just spray on PVA release agent? It's a much quicker process. Looking forward to seeing this project finished.
@TheInkhousecustoms 2 жыл бұрын
@BenTV the clay I use is not an air drying clay, it is an oil base Plasticine clay, specifically made for automotive design. I take the extra step to protect the clay from junk and fiberglass from getting into it, seeing that I reuse the clay. Its an extra step but that what I feel is the best way to getting the lowest profile to the clay, before laying the glass.
@TIMBEAU1962 3 жыл бұрын
I only want to make a windscreen for my motor
@TheInkhousecustoms 2 жыл бұрын
Ok
@BJ-uncensored 3 жыл бұрын
Your series might not have much attention, much heat, but homie your series is fire.
@TheInkhousecustoms 3 жыл бұрын
@BJ so did you make it to part 4? Thanks for the comment 👍🏽
@BJ-uncensored 3 жыл бұрын
@@TheInkhousecustoms yup! I watched the entire series. I've got a knarly 2005 Subaru forester with a large mishimoto front mount intercooler. I'll need to make a bumper skin for it, like you did. Wish I could send you some pics
@TheInkhousecustoms 3 жыл бұрын
@BJ You can send it to theinkhouse340@gmail.com
@TheInkhousecustoms 3 жыл бұрын
Or you can look me up on Instagram @Theinkhousecustoms
@BJ-uncensored 3 жыл бұрын
@@TheInkhousecustoms I would, but I don't have any social media. Just a big loser lol.
@mariojr3390 3 жыл бұрын
Damnn , this entire process is mesmerizing- are you doing this for a client or for personal
@TheInkhousecustoms 3 жыл бұрын
@Mario Jr this is a personal project. Plans are to customize the entire vehicle
@TheInkhousecustoms 3 жыл бұрын
If you love it make sure to subscribe if you haven't and hit the bell you stay involved.
@toufikzdn221 3 жыл бұрын
Man you're the best Can you make cyberpunk quadra back bumper
@TheInkhousecustoms 3 жыл бұрын
@hila hope lol 😆 for what car.. the rear of the jeep will look way different than the standard.
@toufikzdn221 3 жыл бұрын
Not for the jeep May be on supra or dodge challenger 1970
@toufikzdn221 3 жыл бұрын
Or mazda 626
@TheInkhousecustoms 3 жыл бұрын
I plan on getting a 1987 pontiac fiero and do my magic to that. But well see how the future goes.
@toufikzdn221 3 жыл бұрын
I'm sure that will be so good If you want the quadra design in 360° I'll drop it here
@michaelcrossley5661 3 жыл бұрын
This is coming out nice! How long did it take you?
@TheInkhousecustoms 3 жыл бұрын
@Michael Crossley It took me about a month to do, but I was not working on it for a whole month. I'll say if I was on it every day it would have taken me about two weeks.
@michaelcrossley5661 3 жыл бұрын
@@TheInkhousecustoms Damn! That's a lot of commitment. I wish I had the time to do something like this. I might try a smaller undertaking and shape the existing bumper. Thanks again for the video.
@caseychan6909 3 жыл бұрын
Do you need to use PVA before you apply the mold release agent at 6:12?
@TheInkhousecustoms 3 жыл бұрын
@Casey Chan unfortunately for me I didn't use PVA, but I definitely will use it next time around. The PVA goes after the wax. You must wax the mold first defore putting anything down.
@danbobnix 3 жыл бұрын
So cool! Really want to learn how to go about doing this - any decent resources you used before jumping in? Great work!
@TheInkhousecustoms 3 жыл бұрын
nothing specific i watch and been doing this type of work for a long time.
@muhsinthulunadan5140 3 жыл бұрын
Man, couldn't see how its done in the middle,
@TheInkhousecustoms 3 жыл бұрын
@Muhsin Thulunadan. The middle was done the same way as the other areas. Repeat process
@javico40 3 жыл бұрын
Hello bro, what is the name of the material used to cover the clay? I am builder an spoiler your videos are awesome
@TheInkhousecustoms 3 жыл бұрын
@Javier Portilla the material is HVAC Aluminum tape.. help out the channel and purchase from my affiliate link in the description. Thanks and happy building 🤙🏽👍🏽
@capt_beefheart4159 3 жыл бұрын
Where did you get your materials, particularly what kind of clay did you use?
@TheInkhousecustoms 3 жыл бұрын
@Capt_Beefheart the link is in description, please if you plan to purchase go through my link and help support this channel amzn.to/3x5prEl thanks!!
@lukatrades 3 жыл бұрын
how much weight did you save with fiberglass parts? how much in hood? awesome project!
@TheInkhousecustoms 3 жыл бұрын
@LUKA that is a interesting question. I should make a video on this. Even though I didn't put the parts on a scale. The weight difference with the hood is alot.. with the metal hood it had to be lifted with two hands and some effort , with the fiberglass hood one hand , Plus it just looks cooler than stock. But thanks on a good topic the make a vid about 👍💯
@lukatrades 3 жыл бұрын
@@TheInkhousecustomssounds awesome,looking forward to those vids! Thank you! I also have one more question,im looking to build doors but to keep stock door interior as well How hard do you think it would be and would the doors hold stock interior and other parts?
@TheInkhousecustoms 3 жыл бұрын
@@lukatrades the doors. Would not be that hard. It can done in the same process that I'm doing with the bumper. Take a mold using the existing door as the plug.. it would be three parts, inner frame, outer skin and window rail. Imagination and planning is key when building parts. Hope the information helps.
@lukatrades 3 жыл бұрын
@@TheInkhousecustoms helps a lot,thank you very much!
@goddasabiex 3 жыл бұрын
what kind of clay did you use? where do you get it? thanks, awesome vids!
@TheInkhousecustoms 3 жыл бұрын
@Ryan Stamper the clay used is Staedtler Marsclay 8432M Styling/Modeling Clay Faberclay Plasticine Polymer. I purchased off ebay for around $25 for 5 lb. I bought 3 giving me 15 lbs
@scuderia_team 2 жыл бұрын
How did you make the reinforcements shown towards the end? And how do you decide placement generally?
@TheInkhousecustoms 2 жыл бұрын
The reinforcements are silicone tubing hot glued in place, then fiberglassed over. applied after surface has cured. For placement of reinforcements, I do over long areas and areas that make for the most rigid mold. Basically to keep the mold from twisting and deflecting when making parts. Fiberglass parts can warp in a mold if the mold is not strong.
@akmohdfirdausbinpghjabdrah2153 3 жыл бұрын
how many of kg fiberglass did u used to make that bumper?
@TheInkhousecustoms 2 жыл бұрын
I'm not to sure 🤷♂️
@vsjemison03 2 жыл бұрын
Would you do this for someone else?
@TheInkhousecustoms 2 жыл бұрын
What do you mean.. make a custom kit for other vehicles, or just for this jeep?
@vsjemison03 2 жыл бұрын
Make custom for a 02 ML320
@TheInkhousecustoms 2 жыл бұрын
I would do it for someone else on another vehicle!
@craigcommadore4441 Жыл бұрын
What kind of resin did you use? Currently working on some fender flares but not sure what resin to use.
@TheInkhousecustoms Жыл бұрын
It's a boat resin. Not sure the name right now but it's a polyester resin I stay away from bondo resins 👎🏽
@craigcommadore4441 Жыл бұрын
@@TheInkhousecustoms thanks for the help
@kevinstormcloud 2 жыл бұрын
Was wondering how much fiberglass you used for the whole bumper
@TheInkhousecustoms 2 жыл бұрын
I used about 6 to 7 yards of chopped mat and 2 to 3 yards cloth fiberglass, between the mold and final part. About $12 a yd.
@hrivcxz 2 жыл бұрын
How to avoid pin holes
@hrivcxz 2 жыл бұрын
How??
@TheInkhousecustoms 2 жыл бұрын
@HRIVCXZ Pin holes? Where in gel coat?
@hrivcxz 2 жыл бұрын
And also like this crafting and polishing alo i have more pin hole problems. How to avoid it
@TheInkhousecustoms 2 жыл бұрын
If your getting pin holes in your gel coat, it's because one of your release products haven't dried properly. When Appling wax allow to dry and wipe or polish out, the apply your PVA and let dry completely. Then apply your gel coat.
@the_mylky_way6539 3 жыл бұрын
dope vids but music is kinda loud
@TheInkhousecustoms 3 жыл бұрын
@The_Mylky_Way thanks for the advice I will work on that.. using laptop speakers instead of using headphones.. will look into that on future vids. Thanks
The Ink house customs
Рет қаралды 39 М.
Фани Хани
Рет қаралды 1,7 МЛН
The Ink house customs
Рет қаралды 93 М.
STIGZ
Рет қаралды 2,5 МЛН