Wow! I’ve never seen this art before. That was great. I will have to try this. Thank you for sharing.❤
@jennarayne133 жыл бұрын
Wow thank you so much. I have searched high and low for info on how to do this. And I came upon your video that had so much good info. Ugh thank you! Can’t say enough
@AdrianasPaperCrafts3 жыл бұрын
So happy I could help!
@tigeabenton21746 ай бұрын
It came out very cute 🥰 My son’s bday is tomorrow. I just may have to make a few of these tonight.
@louisianateeshirts4 жыл бұрын
Thank you so much, I have all of the supplies you named, I keep putting it off but I will be making a prop ASAP...Thanks again
@AdrianasPaperCrafts4 жыл бұрын
You're so welcome. Best of luck to you!
@jimayahalanie3 жыл бұрын
Thank you ! I just received my order from you today and am so pleased !
@AdrianasPaperCrafts3 жыл бұрын
Aww yay! I'm so happy you love it!
@ladylala304 жыл бұрын
Thank you so much! I have been cutting this stiff by hand with an exacto knife. But this seems so much better. Thanks again.
@AdrianasPaperCrafts4 жыл бұрын
Oh my goodness! 😱 you're definitely going to love hot foam cutters then!
@impressionsphotoboothatlan62663 жыл бұрын
Adrianne what brand is your glue gun. Where can I find it. Do you have a recommendation for a large format printer. Thanks for the video
Hello I enjoyed your video 😊! It was very helpful. My nephew will be turning 1 next month and I want do a couple of decorations for his birthday
@tigeabenton21746 ай бұрын
The foam. I use the dollar tree boards. Just peel off the paper. And I love my annoying stick foam cutter lol. Works faster
@jazmineruiz36523 жыл бұрын
Very cool
@sweetuniqueities95462 жыл бұрын
Fascinating! Thank you for sharing!
@kbadge263 жыл бұрын
That’s nice
@daniellejohnson51983 жыл бұрын
Great tutorial
@rnguyen2516Ай бұрын
You answered so many questions that I had! What large format printer do you have? Doesn’t it smell bad when you cut the foam? I can barely stand the smell! How do you make a stand to support the prop?
@AdrianasPaperCraftsАй бұрын
I used my Canon Pixma ix6820 for this project, but nowadays I use the Epson et8550 printer. It really doesn't smell as you work the way I did, which is kind of quickly. It smells more if you leave a piece of foam there to burn away. Like if a piece of foam got stuck on the hot wire and you just left it there, then yes, there is a chemically smell.
@huddles272 жыл бұрын
Amazing! Thanks for your tutorial girl 😊 do you have a video showing how to make a stand for it or how you make it stand? If so can you rey with it, would appreciate it so much. Can't wait to give this a try for my sons bday! Thanks again 😊
@AdrianasPaperCrafts2 жыл бұрын
The stands I make by just cutting out a square shape from the foam I just used for the prop. OR, some customers request the round foam, so I get those from Dollar Tree. Most customers order the base part left white, but if they want it painted, them I just use regular craft paint to paint it, and if they want it glittered, I just add glitter. Then you put a stick, straw, or plastic dowel into your character prop, and then place it into the foam base. Since everything is foam, it's pretty easy.
@Honeychilecrafts4 жыл бұрын
So cute!
@AdrianasPaperCrafts4 жыл бұрын
Thank you girl! 🤗
@IJustLoveMakeup134 жыл бұрын
You should also make a video on how you do the cake toppers
@AdrianasPaperCrafts4 жыл бұрын
I've been trying to think of a simple enough design to use as an example piece so that I dont overwhelm anyone lol, but it is on the list!
@lynnebizlyne436 Жыл бұрын
kzfaq.info/get/bejne/iZhgjLpez8XGnmQ.html Adriana’s tutorial link
@woemace85733 жыл бұрын
Love this! I did something similar with the foam board but cut the foam into a number & did a photo collage! Do you have a tutorial on how to make the complete character foam prop?
@AdrianasPaperCrafts3 жыл бұрын
I dont, but its supet easy! I cut the characters using my Cricut machine, and then after the gluing and cutting of the foam, I use my foam cutter to cut squares out. Those squares are my base. I then just glue one end of a plastic dowel into the base, and the other end into my character that I just cut out of the foam.
@tmfloves3 жыл бұрын
What foam base do you use? Since spray paint isn’t good on foam, what else is recommended to color it?
@mrobertaw683 жыл бұрын
Great job!!! Thanks for sharing. New subscriber
@elainecolunga45952 жыл бұрын
You are amazing ❤️
@AdrianasPaperCrafts2 жыл бұрын
Aww you're so sweet!
@denisesmith7092 Жыл бұрын
I wish you would’ve started from the beginning with printing out characters etc. some of us are begginers
@blossom8659 ай бұрын
I needed to see how u make it stand
@kiatillman90013 ай бұрын
Hi, great video! What large format printer would you suggest?
@AdrianasPaperCrafts3 ай бұрын
I have a whole video on my Epson 8550, but it's very expensive. A cheaper alternative is the Canon Pixma ix6820. I absolutely love it. And I suggest getting ink for it on inkjets.com
@lindahernandez66724 жыл бұрын
You are amazing
@AdrianasPaperCrafts4 жыл бұрын
Thank you 😊
@jacquelineramirez4423 жыл бұрын
How in the world do you do it so fast?! I recently added these to my party packages. Lord they aren't easy. I take it slow lol.
@AdrianasPaperCrafts3 жыл бұрын
Lol Well honestly I have a bad habit of never taking things slow, so I really can't help it. I always just want to finish things NOW.
@smileinparis30463 жыл бұрын
Thank you for listing supplies needed other videos just show the finished product.
@kasexoxo3 жыл бұрын
Hi! Just watched your video love it! I do have a question if I buy the uchida foam cutter from hobby lobby are there replacements I can buy when i need to change?
@AdrianasPaperCrafts3 жыл бұрын
Yes, you have to buy the replacement wires directly from the Uchida website.
@lovely_deja3 жыл бұрын
What printer do you use? What's paper doe you use? And what large printer do you have? Omg I love all your work♥️
@AdrianasPaperCrafts3 жыл бұрын
Hi there, I answer all of those questions in my blog posts. Check it out on my website here: www.adrianaspapercrafts.com/pages/design-innovator Scroll down to the FAQS blog.
@1234567163339 ай бұрын
What printer do you use for large props please
@AdrianasPaperCrafts9 ай бұрын
I explain all that in different blog posts on my website here: adrianaspapercrafts.com/pages/design-innovators
@AdrianasPaperCrafts9 ай бұрын
I currently use an Epson et 8550
@b3thi32 жыл бұрын
Question… to make this waterproof for like outdoor decor could you use like a clear coat spray on them or does it melt the foam? Or maybe like a special glue could be used?
@AdrianasPaperCrafts2 жыл бұрын
You could laminate the images before gluing them to the foam to make the images waterproof. There isn't anything that could waterproof the actual foam without melting it.
@b3thi32 жыл бұрын
@@AdrianasPaperCrafts ok thank you 😊
@iareonia274 жыл бұрын
Do you ever cover your sides
@AdrianasPaperCrafts4 жыл бұрын
No, I dont. It's never bothered any of my customers lol
@lishamccants82493 жыл бұрын
❤️❤️❤️
@craftycanto59564 жыл бұрын
That is so cool!!!
@tmfloves3 жыл бұрын
What do you do when the reverse side design doesn’t match the size of the foam? Leave it? Trim it? Ty
@AdrianasPaperCrafts3 жыл бұрын
So that does happen often depending on the design people request. What ends up happening is I have to sit down and forcibly create a design that WILL match. If you check out my Instagram, there are monster truck props that I had to design so that the text would match up.
@godivachocolatier6903 жыл бұрын
❤
@quiin262 жыл бұрын
Love this. Very helpful. Quick question how do you make it stand?
@AdrianasPaperCrafts2 жыл бұрын
With a base I make from foam, or with precut foam.
@Caiomhescreation Жыл бұрын
Thanks for the tuturial .Do you cut by hand
@AdrianasPaperCrafts Жыл бұрын
If they're too big, I do cut by hand, but if they're under 9" Tall, I use my Cricut to cut them out.
@kreativelykrafty60444 жыл бұрын
Thank you so much for sharing. What is the name of your wide format printer?
@AdrianasPaperCrafts4 жыл бұрын
Its a Canon Pixma
@TJ-jj4dk2 жыл бұрын
This was INCREDIBLY helpful! Do you know how I might be able to cut foamboard that has that paper on it? I know you said that machine won't work for that type.
@AdrianasPaperCrafts2 жыл бұрын
Unfortunately with regular project foam board, you'll just have to use a sharp box cutter or xacto knife. As long as you use a good, sharp one, it's pretty easy. The technique to use is to do 3 cuts. The first pass with the blade will be a light one. The 2nd pass is a tiny bit more pressure, and the 3rd one is pressure that cuts all the way through, in 1 fluid motion.
@natalievaca0012 жыл бұрын
I'm making props for my son's birthday right now and I'm using the the dollar tree foam board the paper on it is pretty easy to rip off the foam!
@AdrianasPaperCrafts2 жыл бұрын
I did that once for an overnight event, but I did not like how thin the foam is after removing the paper. I'm so used to my thick foam.
@dianelall52557 ай бұрын
How did you cut the back layer to fit the size?
@AdrianasPaperCrafts7 ай бұрын
Which back layer?
@ginahernandez34813 жыл бұрын
great tutorial! how much do you sell these foam props for?
@AdrianasPaperCrafts3 жыл бұрын
It depends on the size requested, but average size and price is 12" tall , so $15 double sided
@margaretlewis75 Жыл бұрын
What type of large format printer you use also how big does it print
Excellent! I would like some of these as photo props for my business. Do you sell these? I didn’t not see them on your website.
@AdrianasPaperCrafts2 жыл бұрын
I normally do, but just not currently. I have a backlog of orders, so there's certain items I'm not taking requests for at the moment.
@berenisrosas97120 күн бұрын
What happens if you use it on a school foam board
@AdrianasPaperCrafts20 күн бұрын
That paper that us on the foam board gets in the way. You have to peel that off first. If you want to be be able to cut that board without peeling the paper off, you would be better off using a hot knife.
@stephaniemilandu70612 жыл бұрын
Hey Adrianna, would you recommend getting both foam cutters? Or is their one you prefer more than the other?
@AdrianasPaperCrafts2 жыл бұрын
I personally HATE the handheld "wand" one, BUT, you will have tes that you'll need a handheld foam cutter to get into spaces that the table top for cutter can't get into. (For example, the center of the letter "o".) So yes, I do recommend getting both a table top foam cutter, and a handheld one.
@stephaniemilandu70612 жыл бұрын
@@AdrianasPaperCrafts Perfect, thank you so much for your response! I'm so excited to start making my own props myself. One last question, is there a specific type of circuit you'd recommend?
@AdrianasPaperCrafts2 жыл бұрын
At this point, I recommend the Cricut Maker (not the Maker 3. It's seriously no different than the Maker, so no sense in spending more money). The Maker has got all the kinks worked out from its predecessors, so the money for it IS worth it. HOWEVER, IF you can afford to go with Silhouette, I do recommend you do so, only because the software for Cricut machines is always messing up. I don't personally have a Silhouette, but it's because the cost wouldn't make sense since I don't use my cutting machines all that often.
@stephaniemilandu70612 жыл бұрын
@@AdrianasPaperCrafts ok thanks. Is there one that you'd suggest (the silhouette portrait or maker) ?
@AdrianasPaperCrafts2 жыл бұрын
I hear wonderful things about the Cameo line.
@ashnainfotainmentworld83983 жыл бұрын
Pls makea video on how to cut prop with this machine. And mention the machine name also
@AdrianasPaperCrafts3 жыл бұрын
I did cut the foam with this machine in the video. And the foam cutter is from Hobby Lobby. It's not a super name brand item. It's the only large foam cutter they sell.
@ashnainfotainmentworld83983 жыл бұрын
@@AdrianasPaperCrafts ok thanks alot. I m your new subscriber from india and the oldest city of the world VARANASI . I watched ur all videos it helped me alot. Thanks
@cath3rine12312 жыл бұрын
Hello! Question for you, where are we able to get the characters to print them out, do you make them yourself or is their somewhere to upload it or just find it on google ?
@AdrianasPaperCrafts2 жыл бұрын
You can find some on Google, but if you can't find what you want, you would have to make a custom design using a program like Photoshop or Canva.
@shelibell30 Жыл бұрын
Does it give off a toxic fumes though? I read something about carbon monoxide
@AdrianasPaperCrafts Жыл бұрын
Not that I've noticed, or had any issues with.
@misssnappypants76252 жыл бұрын
Are you able to sell these projects or is that a no-no because of copyright stuff?
@nkeagaines94043 жыл бұрын
Can you print 20x30 posters with your large printer ?
@AdrianasPaperCrafts3 жыл бұрын
No, mines limited to 13x19. Each large format printer will specify what size they print up to.
@Thickalicious293 жыл бұрын
Love it..Do you make the foam character tables..would love to learn
@AdrianasPaperCrafts3 жыл бұрын
Which character tables do you mean?
@Thickalicious293 жыл бұрын
@@AdrianasPaperCrafts I seen someone post a Minnie Mouse foam head cut out and it was a table that they had they cupcakes on
@AdrianasPaperCrafts3 жыл бұрын
Ooohh...no, I have never made one of those. But really, I would assume it's just the prop mounted on top of a cupcake stand that you can buy from Walmart, you know?
@Thickalicious293 жыл бұрын
@@AdrianasPaperCrafts thank u
@maliaanderson3022 жыл бұрын
Hi I just watched your video which card stock paper is the best to use
@AdrianasPaperCrafts2 жыл бұрын
For projects like this, heavier Wright paper is best so that the glue doesn't bubble the paper. I use either 110# cardstock from Michael's or 72# koala photo paper.
@idadejesus9313 жыл бұрын
Hi love ur videos but can u use the folk art little paints u find at dollar store n brush it on ? Thank u
@AdrianasPaperCrafts3 жыл бұрын
To brush on what exactly? Do you mean to pain the characters on foam? I'm sure you could.
@idadejesus9313 жыл бұрын
On the styrofoam thank u
@idadejesus9313 жыл бұрын
K thank u have a blessed day
@dianaguzman18504 жыл бұрын
Can you link the foam please?
@AdrianasPaperCrafts4 жыл бұрын
I cant ever find it online. Its garage door foam at Lowes/Home Depot. It's in the same aisle as all their insulation foam.
@iareonia274 жыл бұрын
Hey! What kind of wide format printer do you have? And is it a laser printer?
@AdrianasPaperCrafts4 жыл бұрын
Hey there, I've got an entire blog post dedicated to info on my printers. Take a look at it: adrianaspapercrafts.com/blogs/frequently-asked-questions/which-printers-do-i-have
@yeseniavega77323 жыл бұрын
When I click on that link it says post or video have been deleted
@alexisglover51264 жыл бұрын
When you say reverse image, do you mean your mirror the second image?
@AdrianasPaperCrafts4 жыл бұрын
Yes
@gabrielleyoung36063 жыл бұрын
what do you suggested if we don't have that type of printer
@AdrianasPaperCrafts3 жыл бұрын
I get asked this often, so I wrote a blog post on this topic that I think you should check out: www.adrianaspapercrafts.com/blogs/faqs/common-question-1-what-printer-should-i-get
@theresarodriguez96623 жыл бұрын
Hi are you still making character props? I was wondering how much you’ll charge for baby space jam characters?
@AdrianasPaperCrafts3 жыл бұрын
Hi there Theresa, I do. You just place your order on my website www.adrianaspapercrafts.com
@yanizruiz25463 жыл бұрын
Can somebody PLEASE give me a link or exact name on the foam she used?!!! I look everywhere and they all have that paperish film on top
@AdrianasPaperCrafts3 жыл бұрын
I get it from Lowes in the garage insulation foam aisle. There's 2 options. There's a pack of 4 long foam sheets for like $12-$13. Then they also sell 1 super huge sheet, it's like 9ft long for about the same price.
@idadejesus9313 жыл бұрын
Hi again n where did u get the tabletop foam cutter thank u
@AdrianasPaperCrafts3 жыл бұрын
I got mine from Hobby Lobby
@mariiiz14363 жыл бұрын
So I have my baby girls first bday coming up and I would love to do these stand up foam props for her party but the images I want are high resolution images....so if j use them on cricut I can only use print and cut..... how can i go about it ??
@AdrianasPaperCrafts3 жыл бұрын
Print + Cut is super easy. You literally just upload your image, size it to whatever size you need it (within the sizing limits that Cricut has of course), and then send it off to be cut by your machine. Design Space will print the image out, you feed the print out into your machine, and the machine cuts the image out. That's how I got the cut out that I use in this video.
@mariiiz14363 жыл бұрын
@@AdrianasPaperCrafts omg thank you for taking the time to reply... the thing is I would like my image to be pretty big.... like the larger than mat... I wish you can see the images I'm trying to worm with ? Also what printers would you recommend ..??
@AdrianasPaperCrafts3 жыл бұрын
So for anything bigger, you can either use the "large than mat" method. For that, there's a billion tutorials you can browse. You could send the images off to print as posters somewhere, and then hand cut them. OR, you can use a poster making website like blockposters.com to print at home. I've used that website in the past. It basically prints a large poster out over a span of multiple sheets of paper. Once all the pieces are printed, you go ahead and hand cut them out. Then you put all the pieces together like a puzzle. When I used that method in the past, I would glue my "puzzle" to poster boards, or foam boards, and then used them as large party stands. There's a few photos on my Facebook page of props where I used this method.
@AdrianasPaperCrafts3 жыл бұрын
As far as printer recommendations: www.adrianaspapercrafts.com/blogs/faqs/common-question-1-what-printer-should-i-get
@yeseniavega77323 жыл бұрын
What large format printer do you have or recommend
@AdrianasPaperCrafts3 жыл бұрын
Mine is the Canon Pixma large format printer. I use it almost every day and absolutely love it.
@vonneshallsilas21793 жыл бұрын
How much u paid for your printer. I’m currently looking fir a large format
@AdrianasPaperCrafts3 жыл бұрын
About $200
@nataliavila26733 жыл бұрын
@@AdrianasPaperCrafts Where can we buy it? Thanks for sharing!
@annjohnson17783 жыл бұрын
Can’t you peel the paper off from the foam board you get from Dollar Tree?
@AdrianasPaperCrafts3 жыл бұрын
I've done that, but the foam itself is sssooo thin once you peel the paper, that I dont recommend doing that.
@RicalleNicole2 жыл бұрын
Hi, What kind of large format printer do you have?
@@AdrianasPaperCrafts I appreciate your response, thank you!
@zayramcintosh62812 жыл бұрын
How do you get centerpiece to stand up
@AdrianasPaperCrafts2 жыл бұрын
I show you the foam base in the video.
@aniyacul80383 жыл бұрын
What kind of computer do you have ? What kind of Pinter do you have ?
@AdrianasPaperCrafts3 жыл бұрын
All that info can be found on my website. I wrote lots of blog posts on them since people ask me that so often lol. Go here: www.adrianaspapercrafts.com/pages/design-innovator and scroll down to the FAQS blog.
@kelseyparrilla8590 Жыл бұрын
@@AdrianasPaperCrafts it’s saying the page doesn’t exist
What app do you use to print out large pictures on your cannon pixam large format
@AdrianasPaperCrafts3 жыл бұрын
Photoshop. You can use any program that allows you to type in the measurements of your canvas before beginning your project.
@junkcarz47203 жыл бұрын
Can you make them bigger
@AdrianasPaperCrafts3 жыл бұрын
If cutting using Cricut Design Spacez the biggest you could cut them is 9.25"x6.75". But if you cut by hand, you could make them as big as you want. That's how I've be able to make 2 and 3 foot tall foam props.
@junkcarz47203 жыл бұрын
@@AdrianasPaperCrafts how you cutting foam
@ciciliaflores69973 жыл бұрын
Hi...what brand of glue gun are you using?
@AdrianasPaperCrafts3 жыл бұрын
Surebonder.
@ciciliaflores69973 жыл бұрын
@@AdrianasPaperCrafts thank you 😃
@claudiamadrigal5047 Жыл бұрын
Where did you get your hot glue gun from?
@AdrianasPaperCrafts Жыл бұрын
From the SureBonder website
@claudiamadrigal5047 Жыл бұрын
Thank you!!
@montasiab68963 жыл бұрын
Hey , I Clicked The Link To View All Of Your Printer Information But It Says Page Not Found . Can You Give Me The Details Here 😫
@AdrianasPaperCrafts3 жыл бұрын
Hey hun, read about them here: www.adrianaspapercrafts.com/blogs/faqs/which-printers-do-i-have?_pos=1&_sid=206baa9de&_ss=r
@joannabriones26854 жыл бұрын
How do you print and cut bigger images on cricut?
@AdrianasPaperCrafts4 жыл бұрын
Its called cutting "larger than mat". Its honestly very simple, but can get tedious depending on how many layers you are working with. I'll add a video for you guys soon, so be sure to check back this week for it!
@louisianateeshirts3 жыл бұрын
Adrianas Paper Crafts hello, what size is this prop?
@AdrianasPaperCrafts3 жыл бұрын
12" total on the base.
@s.j.24143 жыл бұрын
Hello 👋 where did you buy your glue gun?
@AdrianasPaperCrafts3 жыл бұрын
From the Surebonder website
@jay49523 жыл бұрын
@@AdrianasPaperCrafts thank you!!
@MoDogg1433 жыл бұрын
What kind of paper do you use for something like this?
@AdrianasPaperCrafts3 жыл бұрын
I use cardstock half the time. Other times I use regular paper. The reason for that is because the 13x19 sized paper that I have is only 30#, so it feels like regular computer paper. If I do use that. I am just careful with the hot glue.