How To Make Great Tumbler Seams and Edges!
Рет қаралды 21,064
Жыл бұрынHey, everybody, and welcome. My name’s Roy, and today we’re gonna talk a little about sublimation tumbler seams and edges, and tips on getting them right!
Be sure to go back and look at my video on tumbler seams • The Secret To Creating... as well as my video on tumbler edges • How To Tape A Sublimat...
And here’s the video I did on comparing sublimation papers • Sublimation Paper Show...
If you’re looking for some unique designs, be sure to check out my digital design website. www.industrialfringedesigns.com/
Here are links to the Pinch Perfect: www.plymouthcreativeproducts.com or www.etsy.com/listing/1228521608/
Here are links to products I used in this video, as well as products I use regularly and feel good about sharing. Some of the links are affiliate links, meaning I may get a small commission, but you pay no additional costs. It’s a great (and easy) way to help support this channel:
Peel N’ Stick Ruler Tape: amzn.to/36HZxOV
20mm x 33m, 108 feet (larger) heat tape: amzn.to/33CHvvZ
13mm x 33m, 108 feet heat tape: amzn.to/3eh4LBU
10mm x 33m, 108 feet (narrower) heat tape: amzn.to/3edULJC
Desktop tape dispenser: amzn.to/3qfs2tG
24” metal ruler: amzn.to/3G9371v
Folding utility knife: amzn.to/3fjkUr8
Olaf 12” x 18” self-healing cutting mat: amzn.to/3JbZ0n4
Oven thermometer ($5.99): amzn.to/3BkTuv7
Cosmos Ink: shareasale.com/r.cfm?b=136325...
Heat Press Nation Signature Series Mug Press w/Tumbler attachment: shareasale.com/r.cfm?b=113707...
Hamilton Beach Convection Oven: amzn.to/3mhfSid
Sublimation paper I use:
HTVRont:
amzn.to/3psAPbG
Koala:
amzn.to/3wb4tWE
Asub 120:
amzn.to/3AqtmQC
Asub 105:
amzn.to/3K1I5og
TexPrint:
shareasale.com/r.cfm?b=113707...
And please check out our Facebook group, groups/55947.... If you enjoy sublimation, just answer a couple of quick questions and join. You do need to answer the questions, and you must agree to the group rules, but I promise, they’re not difficult! We’d love to have you!
I hope you enjoy, and if this video helped you, please give it a thumbs up! And also, be sure to subscribe for more upcoming fun and informative videos!
@cindyleneave5774 Жыл бұрын
I love your attitude on learning...we can't know it all, but together we learn from each other!
@industrialfringe953 11 ай бұрын
You got that right! Thanks for watching!
@tinagibson7185 Жыл бұрын
Your technique for taping solved every seam problem I was having!! The tops and bottoms of my tumblers are now coming out perfect and that seam is flawless. Thank you so much!!
@industrialfringe953 Жыл бұрын
Yay! I’m so glad!
@phylliswilliams1954 Жыл бұрын
Thank you. I decided to stick with mugs after many mistakes on tumblers, but after visiting your page I decided to keep trying.
@industrialfringe953 Жыл бұрын
Join the Facebook group! Me or someone much smarter than me can help with most any challenge you have! (Just answer the questions and agree to the group rules!) And thanks for watching!
@lynnhayward9092 Жыл бұрын
Roy, thank you for all your helpful videos. I have learned so much watching you.
@industrialfringe953 Жыл бұрын
I’m SO glad! That makes it all worthwhile! Thank you!
@thesoberuprising Жыл бұрын
I'm soooo glad I watched this before attempting to make my first tumbler, it turned out absolutely perfect!!! What a confidence booster!! 😁 Thank you!!
@industrialfringe953 Жыл бұрын
That’s fantastic! Thanks for watching!
@thesoberuprising Жыл бұрын
@@industrialfringe953 😘
@Karenfranco25 5 ай бұрын
Thank you for explaining the process. The seam has really been my issue. I am just starting so I’m trying to figure out how this all works and I appreciate how you broke it down. Thank you
@industrialfringe953 5 ай бұрын
You’re quite welcome! Thanks for watching!
@reneebeardenwilliams5664 Жыл бұрын
Excellent tutorial! The video is full of very helpful instructions that I'll be using from now on when I wrap my tumblers. The blooper real at the end was really funny.
@industrialfringe953 Жыл бұрын
Thank you! I’m so glad I could share this info! And I’m glad you’re enjoying the bloopers!
@brendamills5122 Жыл бұрын
Just happened to come across your videos and have really been enjoying them. It took me a year to set my equipment up to start Sublimating I was so nervous hahaha, But now that I have I am addicted and have so much to learn. Thank you for sharing your knowledge.
@industrialfringe953 Жыл бұрын
I’m glad you’re enjoying them! Thanks so much for watching!
@Eric-kp3wr Жыл бұрын
I just want to say thank you. My sublimation tumblers have become 1000 times better since watching your videos
@industrialfringe953 Жыл бұрын
Eric, thanks so much for sharing! I love that!!! It makes me feel like what I’m doing is worthwhile! Thanks so much for your support!
@flowerlily1 Ай бұрын
Thank you for this great video and sharing your knowledge! QUESTION: I am wondering if you have tried cutting slits on the top side of the tape before you fold it over in an effort to avoid/minimize the kinks. Just wondering if you’ve tried and it does not make a difference or if you’ve not tried. Inquiring minds want to know. Again, thanks for your videos. I like that they are very detailed.
@ufoquilter86 Жыл бұрын
Wow, that is an amazing Tumblr. I am going to have to check into those matte finish for my tumblers as well. But wow what a great covering on your Tumblr.
@industrialfringe953 Жыл бұрын
Thanks! Yes, the matte tumblers are awesome! And thanks for watching!
@user-mj3dh3cz5i 4 ай бұрын
Thanks for the detailed demos and comparisons. Do you have links to recommended vendors for tumblers and water bottles. HPN is a little pricey.
@Embrace_Positivity 9 ай бұрын
This is absolutely what I needed. I have been getting that white line from my seams and I couldn’t figure out what I was doing wrong. Have ruined so many tumblers. Can’t wait to try this method when I get home. Will update when I do this
@industrialfringe953 9 ай бұрын
Fantastic! Don’t forget to put any side of the design that may have white overhang on the top, overlapping the side that has the design all the way to the edge!
@Embrace_Positivity 9 ай бұрын
@@industrialfringe953 update. I did have an oopsie but I’m pretty sure I got these down now. The dark colors were kicking my butt and I was just about to give up on those until watching your videos. Thank you so much
@industrialfringe953 9 ай бұрын
You’re so glad, and that great to hear!
@gerrywolfe2549 Жыл бұрын
Great tutorial.
@industrialfringe953 Жыл бұрын
Thanks so much! And thanks for watching!
@lynnebizlyne436 Жыл бұрын
I enjoyed watching your tutorial. I have been looking for something someone did different than I do because of the top or bottom rim issues. I have come to think it may have something to do with the size of the tumbler press tube or just the quality of the press though I am uncertain. I saw one woman’s press which the tube was much ‘longer’ than mine leaving more space at both ends of her tumbler. Just guessing though. I have also noticed that some cut their designs a tad bit shorter from the bottom curve so I’ll be trying that too. Thank you again for a great tutorial. I haven’t rolled my bottom edge on a towel as you did so I’ll try that too. 👍
@industrialfringe953 Жыл бұрын
I’m so glad you enjoyed! I’m sure press length has something to do with good edges. Or more specifically, shorter press lengths! Also, I’m sure quality of press has a lot to do with it. I’ve seen more than a few people have issues with the cheaper presses. Thanks for watching!
@susanthibault9011 Жыл бұрын
Fantastic tutorial, very well explained. Can I sublimated in toaster over without convection? If so, what temperature and for how long. Thank you for your help.
@industrialfringe953 11 ай бұрын
Hey! While I haven’t tried it, you should be fine with subbing in a toaster oven, you’ll just need to plan on rotating it during the cook. (Convection circulates the heat for you!) I’d try getting one from a thrift store! And remember, never use an oven that you use to cook food! The sublimation gases aren’t good for you!
@user-ex1nk9er8q 11 ай бұрын
Great tips - Thank you. Do you ever find that your yellow heat resistant tape leaves a yellow stain on the white tumbler?
@industrialfringe953 11 ай бұрын
Hey! Great question! With the tape I use, I’ve taped these directly to tumblers, clear & frosted glass cans, ceramic coffee mugs and metal, and I have never had any residue. There are yellow tapes out there that leave a residue, but I’ve yet to have this happen with this brand. amzn.to/3eh4LBU Thanks for watching!
@staceycollins9232 6 ай бұрын
Awesome
@industrialfringe953 6 ай бұрын
Thank you!
@indigenousinkbeads2023 Жыл бұрын
Crafting besties sub paper is far thee best only paper I will use 'Its the ink release for me'
@industrialfringe953 Жыл бұрын
I think my best results are with TexPrint! Thanks for watching!
@timkelsey3643 Жыл бұрын
Besides taping are you using shrink wrap or a silicone locking wrap? Or tumbler press?
@industrialfringe953 Жыл бұрын
Hi! Unless I’m trying to show how to to something in an oven as well as a press, if it fits in my press, that’s my go-to! Check out my video on how I use my press for more details on time and temp. And because I use a press, I don’t need the silicone wrap or shrink wrap. But when I do bake in an oven, I use shrink wrap after taping. Thanks for watching!
@escapedgoat5865 Жыл бұрын
Do you have a video how you are measuring and cutting your prints.also I know all presses are different but cerious what time and temp your using on your press
@industrialfringe953 Жыл бұрын
Maybe I should put together a short video on how I cut my paper and what overlap I use. That’s a great idea! I’ll definitely add it to the ‘video idea list’! As far as time and temp, check out a couple of my other videos. I have one on sublimating in an oven (kzfaq.info/get/bejne/m6-Ahpyirqnem3U.html) and another on subbing in a press! kzfaq.info/get/bejne/m6-Ahpyirqnem3U.html
@vikki92411 Жыл бұрын
Came out beautifully, what temperature and time do you use with your tumbler press? I’ve had a few issues.. lol help! 😊
@industrialfringe953 Жыл бұрын
Thank you! I set my press to 365 degrees and press for 50 seconds, rotate 180 degrees, another 50 seconds, rotate 90 degrees for 25 seconds, then rotate 180 degrees for a final 25 seconds. Thanks for watching!
@vikki92411 Жыл бұрын
@@industrialfringe953 thank you so much 😊
@cyndibusby223 Жыл бұрын
Thank you so much for this video! Is this a 30 oz Tumbler? I gave the same mug/tumbler press from HPN and am having a problem getting the time and temp right. Thank you!
@oh.em.gigi_ Жыл бұрын
does the white part that you leave on the side of the image go on top of the image on the other side or underneath when you go to tape the image on the tumbler?
@industrialfringe953 Жыл бұрын
Gigi, my apologies for not clarifying! The white part goes on top. It allows for an extra little overhang. (Don’t put it on the bottom, or you’ll have a white stripe!) Thanks for watching!
@oh.em.gigi_ Жыл бұрын
@@industrialfringe953 LOL oh my lanta imagine me having a white stripe hahaha thanks Roy !!
@gezy410 Жыл бұрын
Hi Roy, can you tell me what your final dimensions are before you start taping?
@scottstattoos Жыл бұрын
Can you offer advice I'm having trouble with the edge no matter what I do I have a line down the side where I can't seem to get it pushed down..
@industrialfringe953 Жыл бұрын
You have to make sure the paper is flat and tight, and then you have to make sure both seams are pressed down really tightly, especially where the top piece is overlapping the underneath. Thanks for watching!
@susanbain7556 Жыл бұрын
I was having issues and I realized I was pulling the tape too tight and it was creating air pockets. Even when I tapped down and thought I was pushing air it it was still there. Pull paper tight but not tape to tight. I hope this helps
@MargieWoodley Жыл бұрын
I just found your channel. Great information, I just started sublimation and I’m have trouble with my tumblers that have black come out brown . Do you have any tips on what I could do? I would appreciate any feedback. Thank you
@industrialfringe953 Жыл бұрын
Hey, Margie! If your blacks are coming out brown, you’re baking too long and/or your temp is too high. Feel free to join the Facebook group. We can definitely help you out! And thanks for watching!
@kimikoisler7184 Жыл бұрын
i've been having some issues with my tumblers, do you think you could help me out? I keep getting like white markings all over my tumbler and on the top. its not paper residue but it does look like paper residue. it kind of looks like moisture in a way but no matter what paper/tumbler/print I try I get this happening
@industrialfringe953 Жыл бұрын
Join the Facebook a group and I’m sure me (or someone) can help! (Just please answer the questions and agree to the group rules!)
@rogerlondono2521 Жыл бұрын
Great video and detail. What is ur temp on ur press?
@industrialfringe953 Жыл бұрын
Hey, Roger! I do 365 degrees for 50 seconds, rotate 180 degrees, 50 more seconds, rotate 90 degrees, 25 seconds, rotate a final 180 degrees for 25 more seconds. Details are in this video. kzfaq.info/get/bejne/r7Whq6t2v820p58.html Thanks for watching!
@Jeannete99 Жыл бұрын
Hi Roy! My tumbler measures 9.25 in diameter. Do you make your image exactly the same. I’ve been printing 9.27 and get a seam line. It might be my taping but I wonder if I should print exact?
@industrialfringe953 Жыл бұрын
Hey< I think we talked about this in the group, but I just realized your difference of .02 is only about 1/50 of an inch. You may actually need a little more overlap! I try to have about 1/8” of overlap, but sometimes have just a bit more.
@sharnon28 Жыл бұрын
How can you add the line for the seam line ?
@industrialfringe953 Жыл бұрын
Hey! Check out this video on how I make the seam lines! kzfaq.info/get/bejne/hMqAoq5krprchIE.html Thanks for watching!
@whoopsieriot 10 ай бұрын
What is the exact size of the paper image? I keep having issues with overlap wrinkles….
@industrialfringe953 10 ай бұрын
My actual print size is 9-1/4” x just a hair under 8-1/8”. I ad about 1/8” black paper on the overlap side. If you’re having issues, definitely get this! It makes it easy to measure exact sizes! I swear by it. amzn.to/36HZxOV Thanks for watching!
@anjagraf2467 10 ай бұрын
Hallo schönes Video, ich sublimiere im Ofen und mein Edelstahlbecher ist mit 190 Grad und 5 min. statt schwarz lila geworden, was mache ich falsch? Bitte um Hilfe🤔
@industrialfringe953 10 ай бұрын
Stellen Sie sicher, dass Ihr Iven korrekt ist. Es sollte viereinhalb Minuten lang eine Temperatur von 365 Grad haben. Von Lila habe ich noch nie gehört, aber Grün ist zu wenig gekocht. Danke fürs zuschauen!
@notchocheese1234 Жыл бұрын
I notice that your tumbler is painted white. It paint melting a concern when sumlimating? Would that mean I could sublimate yetis and hydroflasks? Also is adhesion/duability a concern when sublimating over a painted surface?
@industrialfringe953 Жыл бұрын
The tumblers I use (and what others use as well) are white with a coating over them to take the sublimation ink. They’re white so they have a “blank” surface to work with. You can only sub items that have a special coating. Because the ink is infused Inyo the coating, there is no durability concern. Thanks for watching!
@nancygregory4584 Жыл бұрын
You mentioned in this video that you leave a 1/16” to 1/8” white seam on your print. You didn’t say why. I’ve been taught to leave no seam and just make sure the two seams are tight against each other. I have pretty good luck with that but not 100% of the time. Do you always leave a seam? Is it better to do it that? way.
@industrialfringe953 Жыл бұрын
I overlap because I know I could never consistently get the size exactly right, and I’d rather have a 1/16” overlap with potentially a slightly darker mark than to have even the smallest white line. And usually I get no darker color at the seam. I’ve also noticed that tumblers are sometimes ever so slightly different in size. By having that little bit of overlap, I don’t have to worry about that! Thanks for watching!
@joycemclaurin1704 Жыл бұрын
HELP !!! Heat Tape seems to have sublimated to tumbler, leaving yellow marks. I’ve never had trouble with heat tape. Any ideas how to remove it. Thank you in advance. Your videos are so helpful. Keep them coming. Joyce, Jus-Say-N-Signs
@industrialfringe953 Жыл бұрын
Hey, Joyce! I’m not sure the tape residue can be removed. I would probably try a little Goo Gone or something like that to try and buff it out. But be careful that you don’t remove any of the sublimation! And I use and swear by this tape from Amazon! amzn.to/3eh4LBU Best of luck, and thanks for watching!
@richardmetteer3944 Жыл бұрын
Started to watch your videos which are very informative. However, when you start showing process(es), except for learning how to initially tape the drink ware it is next to impossible to keep up! Are the tutorials for setting up templates, and making adjustments in photoshop on seams. Your directions are thorough, it’s hard to keep up with steps❗️Again I appreciate your show very informative❗️
@industrialfringe953 Жыл бұрын
Richard, thanks so much, that great feedback! Next time I’ll try to back off on the coffee before filming! Thanks for watching!
@CassieWillis Жыл бұрын
Could you do a video on 22oz fattys in a tumbler press?! Your videos have helped me so much and i am ruining all of these 22 oz :(
@industrialfringe953 Жыл бұрын
I could absolutely do one! I’ll need to order a few, so it will be a little later before I can get around to making the video (plus I have a few I’m already working on). What are your issues? (Join the Facebook group and it will be easier to talk back and forth!) Oh, and thanks for watching!
@CassieWillis Жыл бұрын
@@industrialfringe953 Im using an amazon tumbler press that does up to 30oz but there is about 2-3 inches of exposed tumbler surface area when pressing and im seeing awful tape lines/what looks like vertical print lines/discoloration in my solid full wraps. I do your 20oz protocol to a T and make FLAWLESS 20oz tumblers. I need help! My temp is 365 for 4 passes at 18 seconds a pass to try and keep all sides heated. I rotate 45 or so degrees at a time.
@rhondarhodes1586 Жыл бұрын
They had a something like these on Amazon BEFORE Christmas and now they is nothing like this to be found there. So of anyone has one they would love to donate I’d love to have one bc I don’t see myself paying that much when I usually use the tape resistance🎉
@industrialfringe953 Жыл бұрын
Thanks for watching!
@mariamelingas565 11 ай бұрын
Hello I am trying to get to your facebook page and having problems please help
@industrialfringe953 11 ай бұрын
Just search “INDUSTRIALfringe Sublimation and More!” and it should pop right up!
@mariamelingas565 11 ай бұрын
@@industrialfringe953
@mariamelingas565 11 ай бұрын
@@industrialfringe953 INDUSTRIAL fringeI try over and over I still can get to it
@MrEdsster Жыл бұрын
My paper sticks to everything I have to scrub quite vigously for about 15 minutes. I don't know how everyone gets to just unwrap it with no sticking. I'm using sawgrass paper and a sawgrass 500 printer. Frustrated I am
@industrialfringe953 Жыл бұрын
I’d be frustrated, you, too. I am. Wait. You know what I mean! Are you using a press or an oven? Time and temp (and pressure if using a press)?
@MrEdsster Жыл бұрын
@@industrialfringe953 tumbler press light issue. 395° 70 seconds. Sawgrass paper , sawgrass 500. I've tried up 210 seconds, 385 degrees. Still bad results
@industrialfringe953 Жыл бұрын
Drop your temp to 365 and try. I do 365 degrees and press for 50 seconds, rotate 180 degrees, press another 50 seconds, rotate 90 degrees, press 25 seconds, rotate 180 degrees and press a final 25 seconds. I think you may have it too hot.
@MrEdsster Жыл бұрын
@INDUSTRIAL fringe thank you so much, i have about 100 tumblers and if this work in in the green.
@user-ex1nk9er8q 11 ай бұрын
Great tips - Thank you. Do you ever find that your yellow heat resistant tape leaves a yellow stain on the white tumbler?
@industrialfringe953 11 ай бұрын
Not with this tape! amzn.to/3eh4LBU
BalcevMMA_BOXING
Рет қаралды 20 МЛН
INDUSTRIAL fringe
Рет қаралды 16 М.
Ryan Can Make It
Рет қаралды 3,2 М.
Katrina's Graceful Creations
Рет қаралды 20 М.