How To Make Pet Filament Maker from old parts

Рет қаралды 45,744

9 ай бұрын

Please Like & Share. Thanks for subscribe.
#FREE#FILAMENT #3DPRINTING
3 x 130mm M8 Threaded rods
3x 120mm M5 Threaded rods
6 x 608 Ball bearings
Stl file for pullstruder:
www.thingiverse.com/thing:520...
electronics,bottle,free,How,3d printer,3d printing,3d print,pet,recycle plastic bottles,recycle,free filament,free filament at home,how to make free filament,How To Make Pet Filament Maker from old parts,Howtomakepetfilamentmakerfromoldparts,how to make 3d printer at home,how to make filament,recycling plastic,without electronics,Pet Filament Maker from old parts,Maker from old parts,Makerfromoldparts,Petfilamentmakerfromoldparts,HowToMakePetFilamentMakerFromOldParts

Пікірлер: 78

@mo_adventures 9 ай бұрын

Just a tip. Don’t hammer the bearings in with a hammer like that. It’ll ruin the bearing. Use a pipe with a similar diameter as the outer ring and hammer on that to push the bearings in.

@lets_make 9 ай бұрын

Thanks for the advice 👍

@Gavin-oq5nl 9 ай бұрын

@@lets_make2x4 works too lol

@lajoyalobos2009 6 ай бұрын

If you find yourself needing to hammer in the same size bearings again and again, you can always 3D print something the same size as the outside diameter!

@lets_make 6 ай бұрын

Thanks

@poepflater 9 ай бұрын

Don't be shy to talk. our many accents are like birds singing in God's aviary.

@lets_make 9 ай бұрын

Haha

@SDSypher 7 ай бұрын

Except for Indians

@poepflater 7 ай бұрын

I'm busy learning Hindi, I actually like the sound of languages from that belt of the world. You should hear my Afrikaans accent, or even better my mom's, she makes English sound like foreign. @@SDSypher

@SDSypher 7 ай бұрын

@@poepflater gross

@BurntMemoriesAlt 3 ай бұрын

This is a weirdly spiritual comment Edit: and I like it

@etgha 9 ай бұрын

I'm so chuffed that I randomly just stumbled on this

@lets_make 9 ай бұрын

😃👍

@m150kikuza 8 ай бұрын

I like this kind of work. It helped me save money, I will continue to improve in my way.

@lets_make 8 ай бұрын

Thanks 😀

@sarahhomec7985 6 ай бұрын

i saw the yt short!!!! I'm doing a science fair for school so this is what I'm totally gonna do! keep up the genus work!!!

@lets_make 6 ай бұрын

Go ahead! Thanks 😃

@Bezmd 4 ай бұрын

You are a really good engineer! Thanks!!!!

@lets_make 4 ай бұрын

Thanks 😀

@blandydeuzeman4608 2 ай бұрын

Do you havd any files so we can print this for our self?

@vjvillan4570 Ай бұрын

Just a tip if youre planning on making this, you can skip printing the gears from the roll and directly put the motor to the spool if you add a PWM module to the input voltage of the dc motor. That way, you can reduce the speed of rotation of the spool and use less filaments for the structure and skip the gear ratios 😊 Adendum: you can even add a potentiometer to the glue gun so you can adjust the temperature

@smalkglass9869 9 ай бұрын

great idea!

@lets_make 9 ай бұрын

Thanks 😃

@i-gmen1650 22 күн бұрын

What isthe thread size/pitch for the m12 nozzle?

@itsdan23 5 ай бұрын

Hello, I wanted to say that I really like your work! I would just like to ask what are specific sizes for the board based on the video?

@janiamoon2200 8 ай бұрын

I admire your project, congratulations. May I ask you if melted pet gives off unpleasant odors or is harmful in any way?

@lets_make 6 ай бұрын

Thank you, it does not emit odors, because it does not melt the filament, it just bends it.

@ilikepotatoss 5 ай бұрын

Idk if youll see this but where can i get the base board for the project

@amal3v0 3 ай бұрын

Bro can we use regular extruder set for printing or is it need to use an extra extruder for this platic filament

@jesusquintero9717 11 күн бұрын

Did you make the tools with the printer?

@SwiftyDOT 9 ай бұрын

i have a nozzle changing glue gun but the hole is too small to get something through do you think i can drill in the heating thing?

@lets_make 9 ай бұрын

Not drill heater, only nozzle with 1.5mm drill

@SwiftyDOT 9 ай бұрын

@@lets_make but the hole in the heater is too small

@SwiftyDOT 9 ай бұрын

i have a diffrent glue gun@@lets_make

@lets_make 8 ай бұрын

Drill hole with 5mm drillbit

@aquifelouk 6 ай бұрын

Wow! Really interesting! At what temperature does your glue gun heat up? Is it a high temp glue gun? Thanks

@lets_make 6 ай бұрын

About 210C.

@aquifelouk 6 ай бұрын

@@lets_make Thank you very much!

@adrianooo3658 3 ай бұрын

Is it fine if we didn't use power supply? or just straight into the plug?

@kpimps22 5 ай бұрын

That 3-D printed gear for your drill. Where did you get the file from?

@therelentlesscreator3938 5 ай бұрын

my guess would be to use the gear that goes on the stepper moter but add a post to hold it with the drill or buy a piece of rod to use ( labeled "stepper_gear.STL") i don't know if that will actually work but thats where i would start im going to try this out idk yet if im going to use the head of a drill or a vex robotics motor/stepper

@therelentlesscreator3938 5 ай бұрын

uppon looking at the file yes thats what you need but you also need hardware to clamp it to a metal rod ( i would groove the rod) there is a upgraded gear in the remixes tab if you have access to a file use it to file down a flat face on the rod with that one because it won't slip

@rodolfogenovese7042 6 ай бұрын

I Need to boost my hot glue gun and more thinner the plastic filament. I Hope that this work

@lets_make 6 ай бұрын

Keep trying

@AndrewAHayes 9 ай бұрын

What was the filament those plates were printed from?

@lets_make 9 ай бұрын

3d printed files, printed with recycled bottle pet material

@AndrewAHayes 9 ай бұрын

Ah! from the beer and ginger beer PET brown bottles, awesome I love that colour filament, I nearly have all the components to make a filament machine for PET bottles, I just need some NEMA 17 motors and Im off to the races.

@user-hh9ev8tf2i 3 ай бұрын

I have a hot glue gun that is adjustable in Fahrenheit, what temp is yours in Celsius, so I know what to adjust the temp to?

@chillSpoofy 4 ай бұрын

Which gears do I need to print from the thingiverse link? Or can you just send the ones I'd definitely need

@lets_make 4 ай бұрын

www.thingiverse.com/thing:5200645

@jerryhanks6718 2 ай бұрын

how much flament did this take to print

@iLIGHTBULBiBLOG 3 ай бұрын

What the bearing size outer diameter and iner diameter

@i-gmen1650 3 ай бұрын

Ik the od is around 21.5 mm

@alexwang982 9 ай бұрын

stl file.. which ones to download

@lets_make 9 ай бұрын

www.thingiverse.com/thing:5200645

@alexwang982 9 ай бұрын

@@lets_make which parts of it

@alexwang982 9 ай бұрын

additionally why is my filament peeling when it comes out of the hot glue gun@@lets_make

@CBKCUSTOM 6 ай бұрын

just download it all and open it 1 by 1 then figure it out what you need@@alexwang982

@oguzmeteaslan3460 9 ай бұрын

Do you have any problem related to surface roughness. I designed a system which I use an extruder barell in it but the surface of the final product is so bumpy. Do you have any idea?

@lets_make 9 ай бұрын

Surface of what?

@oguzmeteaslan3460 9 ай бұрын

@@lets_make Surface of the filament. I use PP for material.

@sedalespencer69 9 ай бұрын

Your filament probably has moisture or you're running it through the nozzle too fast, or it's not hot enough..

@oguzmeteaslan3460 9 ай бұрын

@@sedalespencer69 Thank you. Probably it has some moisture in it but I think that PP is a hydrophobic material so İt won't get an moisture in it.

@lets_make 8 ай бұрын

Welcome 😀

@SUPPER43 4 ай бұрын

ДОЛГООО МНОГО ВОДЫ

@momcilomomcilovic558 9 ай бұрын

Will this work with any hot glue gun

@lets_make 9 ай бұрын

Any 100w power.

@user-cu3oc3fc8q 5 ай бұрын

I want to know it is 200w work ?if that too hot for PET

@3dPrintrz 13 күн бұрын

Could I just buy it from you pre made? Just really lazy and don’t wanna do it myself

@Random_Videos624 2 ай бұрын

can you send me one?

@srinivasacv1174 7 ай бұрын

Sir, give me a video for permanent use, not a temporary use video

@lets_make 7 ай бұрын

I not understand

@CBKCUSTOM 6 ай бұрын

he want good design he dont want what you did on drill you just stuck the drill using screw hehehe btw i love your video and i have my own solution for he's problem @@lets_make