Ultra legend watching 5 years later.....

It's useless if you don't tell us the components used

someone made this in a game called trailmakers, I might do it too, but in real life it's more fun to make - nice video keep it up!

Can it be fully controlled? can we change it's direction from left to right and forward to back?

Would have used a pair of paint stirrer sticks in stead of the rulers. They are a lot stronger and stiffer and still dampen vibrations from the apparently left unbalanced props quite well. And I would have laced them together with some string and coated this with epoxy in stread of using screws, as the screw holes weaken the material a lot. But the rulers were great for size reference. Otherwise a nice functional build, albeit seeming a bit crude. I've seen worse jobs fly well though. What many don't realize is that the foam carrying the controller board also acts as a vibration damper, which can be rather important. If vibrations swamp out the dynamic range of the piezo gyros, they won't work at all and your drone will act randomly. Vibrations will also reduce stability if not kept below a certain level, even though the drone may still be flyable. But that's something that is usually tinkered a lot with on scratch built drones.

Fantastic work, bro! Really well done!!! 😃

What was the name of that connector where all ESC's red wire were connected in one way and another black wire was connected in other way, can you tell me please... I need this one

Do we need power distribution board ? If yes can you suggest any if i am using motors and esc with similar specs?

Does the motor you choose depand on weight or how you know about the right motor for right weight thanks

I am making a quadcopter with sp racing f3 After programming only one motor is rotating then i open the motors and tested it individually bot no motor is rotating then i bought new esc & motor those r also not rotating so please help me to find the fault Hope you will help me

Congratulations, it has been a very productive and beautiful project.

can u pls tell the drone which u had made is aerodynamically stable or not and upto what max height it can go up in air

Hi, can anyone help me please? I calibrated the esc's. Throttle works fine but if I wanna change any direction with the right stick two motors at the side starts rotating faster but the problem is that the opposite ones completely stops. What should I do ?

whats the connector you used to connect all the esc to power

This is amazing

What was the 30A stuff? I have a project and need to know plz tell me.

Hi sir! Can you make another video of a car horn project? Like the one that we can attach on our bikes? Something like portable and rechargable.. Ive tried to look for DIY vids for this but there's no available right now.. We badly need a car horn for our bikes while riding those busy streets/highways (: Im looking forward to it with my cobikers..

I love how you have links to parts. Many people forget that. Could you show us how to build a tricopter?

what's the name of the tools to hang them together it's expensive to pay 'please

Legend of legend watching this 4 years 🤙

Which type of this you used. Please sand me the list . It is very good.

Can u send names of all material used in this video.can i perches it in vijayswada

In this quadcopter we can use any transmetter a custom transmetter or arduino transmetter?

Who is watching on 1 January 2024 ?😂😂😂

Amazingly easy to assemble. Wow! Thanks for sharing.

Please make video on how to connect flight controller detaildly with calibration

Some links that you have mentioned are not available or not shown in online . Could you add new links ?

Anybody know what he uses to connect the speed controllers to the tplug adapter

What are the things you use in this quadopter drone

From where we get this remote control

Heyyy Can you please share the name of the last part of the drone labeled as "Rx" in the description I am not able to buynit through this website..

Where I can find this material

Sir we need a diagram that can be used for the circuitry for the reference as the circuit is bulky to rig at one itself

Thus it have any remote control.If there is no remote control.How will it stop.

Wow that’s a easy way and it’s so amazing superb👌... but only one problem the parts, where will we get it??

I am also watching three years later you are a legend

Amazing !!!! Thanks a lot for this video. 💚💟

where did you get this type of motors

Wouldn't the drone frame be fragile with the ruler?

What's the things you used to build this drone?

Excellent video. Plz add a description of the each part when being assembled.

Quarantine project come true! Thank you!

Could you please tell me which circuit is used

Bro what is the centre component that you use I think that is a pcb but what is its name

Could you please name those components which are used in this video!

Who else is here like me with the belief that I can never make this drone after watching this video but still watching the video! haha

There's sam music you used before in thes video but you change it ... what's is name please

Hey bro ...I want ask...you....how want know to soldier wyre to receiver board ...I was afraid....cause maybe if I soldier to wrong place...it didn't fly

How much expenditure need for making

I want to buy transmitter and receiver from banggood what you say I should buy or not?

Legend are watching 3 years later

Whats that white thing name im not saying scale the one he connected with the brushless motor

If u making this 1 y r u not mention material names

Hello sir! I hope you are fine, I am from Pakistan. I have a problem, Hope you'll solve it. Which esc and motors you will recommend for my quadcopter drone f450 with DJI Naza M lite. I used "ready to sky" Motor and escs but their performance is very bad. I want motor, escs and battery quality (for long charging life) to be very very good and cheap and they get a long life. If you help me, I would be very grateful to you.

Where we found all these equipments except 2 scales tell me bro I will try at home

Plz add a description of the each part when being assembled.

what is rc quadcopter? and can i add camera on it or not

Please tell me the name of equipment that you uesd to make the drone. I know you have given the names in the description box but still and one more thing I must say your drone is amazing.

The amount of comments of people asking for a list of products when they’re all in the description is too many.

Can u please tell receiver name as this is not available on link as u mentioned

If you use more powerful motors would you need a different control board?

if you told all the names of the things you used in this project then it would be very amazing

What are all of the parts for this project?

I notice most of the item has bin created b4. Where can I buy the item use on this video

Just great!!! Just show us the fancy stuff without telling about the connections and circuits

Awesome Bro. Your video is self explanatory and clear . Thanks

From where you have perches this mother and fans and name of that ket and and from where you have perches remote and battery

That's very expensive

Sir, if you will put the required components in the description, it will be better for us to collect the material ,so that we will be able to make it by our selves

What are the materials you used can you mention plz

which apps do you use for making 3d animations please sir answer my question

Awesome stuff. Can I have a list of components used for that project.

How to control it by phone instead of keypad

Name of material that you use please tell me soon

Sir how many price to make this project 🙏

Esas piezas la compras bro, 💪

No description of the materials used..circuit board..how can it help us

how much wieght it can fly (payload)?

Hey! I have a question Can we use normal motor instead of brushless one?

Great maker tools are a dremel, Magic sculpt amd magic smooth epoxy like materials and resin. Instructables is a great resource, too. Knitting and fiber arts are good substrates. Super glue with baking soda and colored pencil shavings. The colored pencils probably have an additive that helps.

very good but explain the components name plz

Bhai how to make a big drone using 90kv t-motor for carry 2 persons

5:34 it looks like a time bomb.

Sir can you provide the circuit diagram plzzzz c'z I'm trying this one

Great 👍👍👍🇻🇳🇻🇳🇻🇳

Sir how to take the mactien

Yes remote ke aalava kiditos syma X8hw,X8hg remote use kiya to chelaga kya please reply plz

Exellent job !

What is the name of all parts that you make to made a drawn and where we can buy there things

Sir,what did you use for controlling the drone in last

If you told all the name of things used in the project please tell us and this is very useful for all so kindly request to tell about the things used in the project

please I need you to give the names of the components you used

What an Awesome DIY Dron

Wow, thanks dude. I did everything like you did and it works! God bless you :)

what is the name of this connector? 3p plug connector? I couldn't find it

Can anyone tell me if I can use a 12v li-on battery i can't find lipo battery

Sir, How many price to make this project and please give me uses of things in list to make this project. Thinks😊😊

Muito bom o quadricopter parabéns

Please can you tell me the list of materials That was amazing thing see it for ever

Bro.....how would to connect to remote control in this model