I have remade this video to try to help clear up some questions I've been getting/ make it easier for people to get their physics extension to work! This new video does not cover the downloading process but everything else is up to date and better! Link below: kzfaq.info/get/bejne/sKunlKmdsra0YGw.html
@F1nicky11 ай бұрын
I just want to say, your one advice of selecting just a portion of time instead of the entire timeline is what finally fixed sfmphys for me, thank you so goddamn much! :)
@baronvonpickles11 ай бұрын
You're welcome! I was lost as well and it really slaps you in the face haha! Let me know if you need any other help.
@baronvonpickles11 ай бұрын
Note: Once again sorry for the low audio, I did not realize just how low it was. I recently changed a setting in OBS and I think I'm gonna have to revert it!
@SwiftyydemonАй бұрын
thank you, this helped me cure cancer
@ewenlesanquer1Ай бұрын
it helped a lot thank you
@baronvonpicklesАй бұрын
@ewenlesanquer1 Good to know!
@jajoothecoolman10 ай бұрын
underrated asf, please do NOT make the audio mistake again lmfao
@baronvonpickles10 ай бұрын
It's been fixed I assure you 😅 The push to talk was interfering with the sfm, and now I can avoid it happening again!
@DevRamo10 ай бұрын
2:57 starts physics tutorial part (thank you byw :))
@baronvonpickles10 ай бұрын
Glad to help! Also thanks for reminding me to put video timestamps, I'll fix them for this video now!
@lucastucas709510 ай бұрын
THANK YOU NO ONE ELSE TOLD ME HOW TO DOWNLOAD IT
@baronvonpickles10 ай бұрын
Of course!
@Eidobone7 ай бұрын
@@baronvonpickles brother I tried it but when I put Run sfmphys it doesn't load anything
@baronvonpickles7 ай бұрын
@@Eidobone Did you select only a portion of time?
@Eidobone7 ай бұрын
@@baronvonpickles Ready bro, it was just that now every time it finishes loading the character disappears in an instant
@Eidobone7 ай бұрын
@@baronvonpickles When my model disappears, the lines appear completely straight and not curved like the video
@Norville_-Shaggy-_Rogers--Ай бұрын
I came up with a solution Buy GMOD Install GMOD Get the green screen pack room mod for GMOD Record ragdolls in GMOD with the green screen Use sfm and make a poster of the shot you want the ragdoll in Edit them together in post
@kaleb0417 ай бұрын
thank's mate
@baronvonpickles7 ай бұрын
Of course!
@kaleb0417 ай бұрын
it really helped me@@baronvonpickles
@pikmincamera784510 ай бұрын
for some reason my floor falls aswell even through its kinematic edit: i somehow got i working i dont know how or what i did but its all working now.
@baronvonpickles9 ай бұрын
Good to know you got it fixed!
@Levinproyes9 ай бұрын
when i did the floor thing, it just falls down Edit: i just forgot to anchor
@Quitive99310 ай бұрын
thanks you
@baronvonpickles10 ай бұрын
Glad to help!
@64nuggets37211 ай бұрын
That was me who asked ;)
@64nuggets37211 ай бұрын
Also I really only meant models (sorry for that confusion)
@64nuggets37211 ай бұрын
So to spawn models you just have to move the player?
@baronvonpickles11 ай бұрын
@@64nuggets372 No, to add a model, you follow what happens here at 2:16 Right click under the "Animation Set Editor", then click "Create Animation Set for New Model", then lastly select the model you wish to use.
@baronvonpickles11 ай бұрын
@@64nuggets372 If you are brand new to the sfm world, I highly recommend you follow this full tutorial here >kzfaq.info/sun/PL2B46DEB4157E67C4
@64nuggets37211 ай бұрын
@@baronvonpickles thank you so much I've been wondering how to do it for months
@amasapiens2 ай бұрын
I tried to make it appear when i add the simulation but it doesnt
@thezammanme9 ай бұрын
I have been worried if its been updated and is now a virus is it?
@baronvonpickles9 ай бұрын
The version I downloaded was fine, but that was about... 2-3 months ago? I'm currently out of town for the Holiday, but I will check it out as soon as possible for you! I estimate later today or so I should be able to take a look.
@thezammanme9 ай бұрын
@@baronvonpickles thank you
@baronvonpickles8 ай бұрын
@@thezammanme I finally got back; the most recent update (from what I linked) was 7 years ago so I can say it isn't a virus! Just follow the download steps in my video and make sure you download the same one just to be sure!
@thezammanme8 ай бұрын
@@baronvonpickles thank you so much I’m going to download it tomorrow
@baronvonpickles8 ай бұрын
@@thezammanme Of course!
@thebigsnails53092 ай бұрын
How can you find the tank for Pyro?
@scribbledip539 ай бұрын
i still cant figure out how to select the tim
@baronvonpickles9 ай бұрын
No worries! To select a portion of time you just need to select the motion editor found in the bottom left, hold left shift, and drag the portion you want to select. I'm making a video that goes a little bit more in depth of how to do everything to help out!
@bud278510 ай бұрын
9:05
@baronvonpickles10 ай бұрын
?
@NotMVZZL311 ай бұрын
For some odd reason, when I change the rig to "rig_physics" the rigidbodies don't show up.
@baronvonpickles11 ай бұрын
Can you tell me a specific model name so I can take a look?
@NotMVZZL311 ай бұрын
@@baronvonpickles the basic player Scout model that comes with SFM
@baronvonpickles11 ай бұрын
@@NotMVZZL3 I will take a look and get back to you shortly.
@baronvonpickles11 ай бұрын
@NotMVZZL3 I am assuming it is a download error so lets start simple, make sure everything was installed correctly. Only make sure that you dragged the top 3 files (platform, sdktools, and usermod) when moving smfphys to your sfm game folder. Just to be 100% certain I would recommend just reinstalling the physics addon. Also make sure that it is the correct game folder, if you ever moved sfm from one drive to another it could just be in the wrong one. Lastly verify game files to make sure there aren't any missing files or something. The only other way I can get the problem to show up so far is some modded or workshop models work while others don't. The rigidbodies will show up but it appears greyed out and run_smfphys_simulation doesn't work. To be 100% sure, I would recommend using the tf_movies player\hwm\scout.mdl just in case it is a model error with the one you are using. If you are already using the hwm model then let me know. And if there are more details you have then let me know so I can try to get a better picture.
@Monarskys10 ай бұрын
@@NotMVZZL3did you download the latest version on smth cause for me all I gotta do is scripts and press it there idk if I have the latest version.
@SaurianAnimates6510 ай бұрын
For some reason "run_sfmphys_simulation" doesn't work. Could you explain why it doesn't work?
@baronvonpickles10 ай бұрын
Did you make sure that you do not have all of time selected when running the symphys rig? This is one of the most important steps and most overlooked.
@SaurianAnimates6510 ай бұрын
@@baronvonpickles Yes, I selected a portion of time yet "run_sfmphys_simulation" doesn't work. The model I've been using is the Allosaurus model.
@baronvonpickles10 ай бұрын
@SaurianAnimates65 I'm terribly sorry for the late response, I didn't get the notification. I've noticed that Sfmphys has issues with workshop or user made models a bit more often. It usually has to do with inconsistent model bones but in can range it functionality or lack there of. I don't know if there are any quick physic alternatives, aside from if the custom model already has physics built into it. Just to be sure, I will download the model and test it out tomorrow. Back soon with more details.
@SaurianAnimates6510 ай бұрын
@@baronvonpickles Thanks a lot, and I didn't mind the super late response. You obviously have a lot of stuff to do outside of youtube and social media in general.
@SaurianAnimates6510 ай бұрын
@@baronvonpickles Oh and just to add it's the allosaurus that is brown with a bit of blackish stripes on it. Hopefully that helps in finding the actual model.
@Balkan_Heavy_TF2Ай бұрын
is it virus
@baronvonpicklesАй бұрын
@Blitz59299 I haven't had any problems with it. Windows may try to block it from opening, but that usually happens with files downloaded from places like Github. It's a safety thing. Anyways, the one that I linked is the specific version I was using at the time, and I'm still currently using.