How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]

Рет қаралды 221,240

Күн бұрын

Hy There,
Into video about "how to make rc cylinder" i got lot of question when the video about valve will come, and finally it's here.
Valve is much easier to make like cylinder, and really all we need is a minilathe and some tools.
i make this valve preatty big, so i can easily show you, but that valve is easy to make in 20mm diameter or eaven smaller.
To mount servomotor on that valve use some imagination, it shouldn't be hard, or wait until i make some hydraulic project and make it :)
material i used:
-30mm aluminium round rod
-20mm bras round rod
-4mm hex brass bar
-5x7mm or 5x9mm o-ring
-seal paste (i use loctite 518)
Plans you can find there:
I share plans for 25mm and 30mm diameter valve, all the plans is on .jpg files with low quality and high quality (600DPI) so you can see every tiny detail.
drive.google.com/drive/folder...
Making of: Proxxon/dremel drill holder for minilathe
• Making of: Dremel / Pr...
My other hydraulic videos:
How to make RC Cylinder only with a minilathe:
• How to make RC Cylinde...
Using hydraulic on rc Car for lift the snow plow
• Winter time - RC Snow ...
Other:
• RC Snow Plow on Traxxa...
• RC Hydraulic cylinder,...
• RC Snow Plow with hydr...
• Traxxas summit RC Snow...
• Rc hydraulic system op...
• First test RC model hy...
This is my affiliate link to a lathe tool from banggood if you maybe need some.
If you bought from there you will support me and a project like that.
www.banggood.com/custlink/DvG...
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
/ @tinesedej8137
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: KZfaq audiolibrary
1. Chunk - Quincas Moreira
2. Center Ring - Freedom Trail Studio
3. Happy Sixth - Freedom Trail Studio
4. Morning Mist - Quincas Moreira
5. Stardrive - Jeremy Blake

Пікірлер: 206

@isidoromaich7226 4 жыл бұрын

I'm so pumped with projects like this one... I want more but, no pressure :)

@rrenault195 Жыл бұрын

That's perfect! Finally a step by step guide how RC hydraulics can/should be done! Thank you.

@boxertwo 4 жыл бұрын

Great video on valve and cylinder!! Inspired me to have a go at both. Can't wait for more. As others have said anxious to see your pump and relief valve. Keep up the good videos!

@TinC33 4 жыл бұрын

Thanks, i'll try to make pump but...

@allengentz7572 4 жыл бұрын

Thanks for sharing with free plans and excellent video

@navigator_071 3 жыл бұрын

One of the better tutorial videos on KZfaq. If not the best, and I know what I'm talking about. Bravo !

@TinC33 3 жыл бұрын

Thanks

@ActiveAtom 4 жыл бұрын

Hello Tin. We love the power of hydraulics we also enjoy learning here as well. Nice build great lathe drilling location tip with tape strip. We will be back to enjoy more. Lance & Patrick.

@TinC33 4 жыл бұрын

Thanks my friend

@stupid-handle 4 жыл бұрын

Well done! highly enjoyable tiny-hydraulics videos!

@TinC33 4 жыл бұрын

Thanks

@eddietowers5595 4 жыл бұрын

You are the boss, TinC33. I’ve always wanted to make a small miniature animatronic driven by small hydraulics. Only I didn’t know how. But this, my friend. Is going to help. Thanks for the video.

@TinC33 4 жыл бұрын

thanks

@asdf35750 3 жыл бұрын

Very nice! Just a note on marking out, if you use a single datum to make all measurements from you can minimise tolerance errors. In the case of the 4 positions on the chuck, if you measure 63, then 126 then 189 you will get better accuracy than measuring 63, 63, 63. Let's say your measurements are accurate to +/- 0.5mm due to slight errors in placing the ruler, lining up he pencil mark, the width of the pencil mark etc. (you can probably do better, but this is an example). By measuring 63, 63, 63, the last mark will have an error of +/- 1.5mm, whereas it will have an error of +/- 0.5mm if you make all the measurements from one end of the paper.

@shashikantsingh6555 4 ай бұрын

This is far by the most amazing, detailed and informative video about hydraulic valve fot rc models in the world.. thank you soo much for making such a beautiful video🙏♥️🔥... Keep it up sir

@joferusa 4 жыл бұрын

excellent video, very detailed, nothing left unexplained Thanks for sharing

@TinC33 4 жыл бұрын

There is more details i just tell the basic here. Thanks

@ianpendlebury3704 4 жыл бұрын

Very informative plus nice machining work. Thanks for making these videos.

@TinC33 4 жыл бұрын

Thanks

@andypughtube 4 жыл бұрын

I am amazed that I have never seen this design of 2-way valve before. It's really elegant and simple. One improvement would be to make the two grooves as part of a spiral so that the proportional range is larger (so that the ports open and close in the radial direction) . This would be trivial with a CNC mill, but I think that you could also do it by deliberately offsetting the rotor in a 4-jaw chuck, milling one groove then rotating the work in the chuck for the second groove.

@TinC33 4 жыл бұрын

True, easiest way to make extra grew is precission diamant file. I don't want to complicate in that video, i just show how to make most basic valve, without details, also didn't want to complicate with servo holder.

@dannyclark9820 4 жыл бұрын

Very nice work. Thanks for sharing!

@0x_Anakin 4 жыл бұрын

Excellent stuff, subscribed!!!

@moritzlaszlo3115 2 жыл бұрын

Impressiv! Jet so simple, jet so precise 😍

@TinC33 2 жыл бұрын

Thanks

@T0NGPU 4 жыл бұрын

Very nice! I am just starting with my minilathe and Your channel is very good inspiration.

@TinC33 4 жыл бұрын

Thanks

@seafax 4 жыл бұрын

Very useful, thanks for the tips :-)

@dozer2100 4 жыл бұрын

Excelente explicação, magnífico trabalho.

@TinC33 4 жыл бұрын

Thanks

@omskariyazmaraikayer913 4 жыл бұрын

truly inspirational , never thought such things could be made with a little ingenuity , skill and a lot of patience and perseverance.

@TinC33 4 жыл бұрын

Thanks, sometimes they every make without any cnc :)

@dixienormous2704 4 жыл бұрын

I don't even have or build RC stuff but I found this video very informative!

@TinC33 4 жыл бұрын

Thanks, all i make about hydraulic is that snow plow for the traxxas summit, but got some dream to build once a working model of an excavator, but i need to learn a lot before...

@gregsmith8617 4 жыл бұрын

Awesome and informative video, thank you very much!

@TinC33 4 жыл бұрын

thanks

@RCmodeleng 4 жыл бұрын

Hi Tine, I have just seen your links to the plans,, I should have looked, too keen to congratulate your work without looking further at your intro.

@kaspariito 4 жыл бұрын

never done anything like that, ever, but damn, i like it. awesome stuff!

@TinC33 4 жыл бұрын

Thanks ;-)

@BrianPhillipsRC 4 жыл бұрын

Very cool!

@user-kr1jh1wi4w 4 жыл бұрын

Cool work 👍👏

@craigtate5930 4 жыл бұрын

Great vid. Been wanting to build a larger version from scratch for some time

@TinC33 4 жыл бұрын

Thanks

@brucewilliams6292 4 жыл бұрын

Really well done. This inspires me to make some small scientific instruments that involve small fluid transfers. Who is down voting such great content?

@TinC33 4 жыл бұрын

Thanks man

@andresramirezfernandez744 4 жыл бұрын

great project! did you make the hydraulic unit too? if so do you have a tutorial for it? keep the good work, thanks for sharing!

@TinC33 4 жыл бұрын

Not yet, but got in plan to make video also about how to make pump and preassure reliefe valve, but free time isn't my friend.

@actaerucerichie9419 4 жыл бұрын

incredible performance what precision. what is needed as material. for excavator except the video. congratulations again

@TinC33 4 жыл бұрын

Thanks

@thedude930 4 жыл бұрын

great video! what software are you using for the cad? and thank you for the design

@silverhead8243 4 жыл бұрын

Great and nice job, thanks a lot.

@TinC33 4 жыл бұрын

Thanks

@witneydiggersrc3251 4 жыл бұрын

Great video👍

@garthlee8166 4 жыл бұрын

excellent many thanks for sharing!

@TinC33 4 жыл бұрын

Thanks

@tasso6196 4 жыл бұрын

Great work, sir.

@TinC33 4 жыл бұрын

Thanks

@jamesbeen9904 4 жыл бұрын

YES! good vid! MORE RC!! :D

@TinC33 4 жыл бұрын

i must start study how to make a pump...

@rccincy 2 жыл бұрын

Do you need a pressure relief valve if you have mixing or it still required for the system

@TinC33 2 жыл бұрын

Yes you need a preassure relief valve but i don't got them because i got a switch for the pump connected to valve so only when valve is opened motor running, check my other hydraulic videos.

@excitedbox5705 3 жыл бұрын

Awesome work. would it be possible to make the ports around the circumference and use a long rod in the center to control more lines with 1 servo? Like taking multiple of that design but stacking them and routing the fluid in the sides.

@TinC33 3 жыл бұрын

Thanks, i'm preatty sure it is possible, just need to think and make :)

@harryneumann4391 4 жыл бұрын

Thank You ! You are my Hero !

@TinC33 4 жыл бұрын

Thanks

@KW-ei3pi 2 жыл бұрын

Excellent video. I need to make a Four Way Selector Valve for low pressure hydraulic system. This design will work for that I think, though I would like to add a detent to each position. Thanks.

@chozechoze6945 3 жыл бұрын

Excellent

@alberthinds78 4 жыл бұрын

Man, Thank you. I have been looking at these bulldozers excavators extra that are strong enough to do real digging, Frankly. I just can not afford $4-6,000.00 USD for A TOY. My I only paid $300.00 for my 1991 ford F150 truck. Hell, these RC construction toys with real hydraulic systems, {witch is a MUST, cause geared drive Linear Actuator servo's.} Even the best ones will strip out in time. Again, thank you very much for freely sharing your knowledge.

@TinC33 4 жыл бұрын

Thanks, true that toys are really expencive, but with some tool can be entirely made as diy...but it's huge project, hope to make once 1:14 all metal excavator

@alberthinds78 4 жыл бұрын

@@TinC33 I watch a lot of Gold Rush [season 10 Friday October 11 at 9p on Discovery and Discovery } go.discovery.com/tv-shows/gold-rush Plus I am a fan of KZfaq Gold too[guy has a full RC gold mine} kzfaq.info/get/bejne/brGEd6mkv7LInX0.html and I have some ideas to better the operation using the Arduino robotics kits and configuring them to operate all the RC mining equipment from my PC, using sensors, Bluetooth and First person cameras, self guidance system AI's, as well as sight overview cameras, I could run the whole operation myself ... Would cut the required man power from 10 operators down to two mechanics, and three monitors that just watch, take over any vehicle when the AI has a problem. Plus I want build this BEAST, Cat D9 with LeTouneau Pull Scraper kzfaq.info/get/bejne/h859pNB4yNDPp5s.html simply because that's what my Grandpa did for a living in southern California.

@thomvanhooijdonk4249 4 жыл бұрын

Again a very nice project. Do hou have plans of the hydraulic pump?

@TinC33 4 жыл бұрын

not yet, and don't expect them too soon please :)

@LOLODECEUTA 4 жыл бұрын

Gran trabajo gracias por mostrarlo, dedo arriba

@TinC33 4 жыл бұрын

Thanks

@nilugajjar8205 4 жыл бұрын

I love your work. deer were are you?

@rock-afire-fan 3 жыл бұрын

will it work ok to control a pneumatic cylinder proportionally?

@CLAUDIOSRC9529 Жыл бұрын

amazing

@aboxdc 2 жыл бұрын

Super posnetek. Za končno in začetno pozicijo se lahko uporabi kaki zatič in utor, da se ventil ne vrti za 360. 👍👍👍

@TinC33 2 жыл бұрын

Lahko a obicajno se končno pozicijo doloca z servomotorjem ki upravlja ventil.

@23.kartikbhardwaj40 4 жыл бұрын

You are the best

@TinC33 4 жыл бұрын

Far from that, but thanks mad man 😉

@deesaraekanayake4374 2 жыл бұрын

Awesome

@asusrampage7793 4 жыл бұрын

got a question for you would you know how to make a single acting diversion valve i have some idea but im not to sure if it would actually work or not

@TinC33 4 жыл бұрын

Same, just other line connect to the thank instead to cylinder, but than you need a spring into cylinder to stratch by itself

@giuseppemaenza9255 3 жыл бұрын

You make jewels. Never make hydraulic motor? Sorry for my english, greetings from Sicily

@TinC33 3 жыл бұрын

i got plan to make hydraulic pump but time isn't my friend :)

@giuseppemaenza9255 3 жыл бұрын

@@TinC33 Ok, i wish you good work, hydraulic pump and hydraulic motor are very interesting.

@philangezwiliwamtshengu1909 2 жыл бұрын

Please explain how it holds it's possible without buliding up too much pressure on the pump

@TinC33 2 жыл бұрын

Because all the lines is in closed position so oil coulnd go from one side to another side of a piston, oil isnt compressable so cylinder will hold it's position until some elements will leak even when hydraulip pump will be turbed off.

@r.ccustomtruckingsydneyaus4632 3 жыл бұрын

man your soooo smart hey . i love to watch u in action its awsome . wish i could do wat u do with you r.c

@TinC33 3 жыл бұрын

Thanks man

@shinminh3797 4 жыл бұрын

Hello Tin! Can you tell me the size of the mini bolt you got on the cylinder end and where to buy it? Can you give me the link to buy it, please?

@TinC33 4 жыл бұрын

i make them, did you watch the video about cylinder? or did you mean M3 self locking nut wich hold the piston?

@TheJustinM 3 жыл бұрын

Love your work! You are very skilled. Did you ever build your excavator?

@TinC33 3 жыл бұрын

Thanks, not yet but got a wish to get time once in that life to make one from scratch, scale as possible

@TheJustinM 3 жыл бұрын

@@TinC33 ok, my plan is to build a scale excavator. The things I have learnt from your channel will help me greatly 👍

@anthonypointon2844 4 жыл бұрын

Hello can u up load a video of you makeing the pump or can u point me in the right direction of were i can find one for something like this

@TinC33 4 жыл бұрын

I got plan to nake also the pump once, but time... You can buy pump on Www.magomhrc.com

@rodstartube 4 жыл бұрын

very good!

@rodstartube 4 жыл бұрын

that mini hydraulic unit, did you do it by yourself?

@TinC33 4 жыл бұрын

@@rodstartube yes i use it for traxxas summit snow plow, check my other hydraulic videos, links are here into description.

@franciscosena2315 4 жыл бұрын

amigo demostra e fabricando a bomba hidráulica rc.👍

@creativejunior7060 4 жыл бұрын

Very nice project. I will make a mini hydraulic pump and i will make a video of it so you can see it also. Thank you so much for that you share your idea.

@TinC33 4 жыл бұрын

Thanks, i also planning to make video about pump and preassure reliefe valve, but men there are so many project and no free time at all ;-)

@creativejunior7060 4 жыл бұрын

TinC33 please make more video. I wanna be like you. You are the best. Very smart. Your my idol.

@TinC33 4 жыл бұрын

@@creativejunior7060 ah if i be smart i make school and got no dirty hands, but that's not for me, i like to making stuff, repair... And also like all stuff wich smell to gas, trctors, excavators, machines... But all that is just my hobby, so not much time to do that, my main job is electronic maintancer into die cast fabric, and farm afternoon, but now i got a big pause from everything (also here is no new video for a while) because i got surgery on my back (spinal surgery) after a year of bloddy pain into my right leg, now it's all behind but need to be relly careful now, so no more work for this year for me, next year i start again wizh my normal life... Where you are from?

@creativejunior7060 4 жыл бұрын

TinC33 get well soon TinC33. I wil wait for your next video because you are a good person. Your kind of hobby really help us. I live in the Philippines. Get well soon so can do your hobby because i feel that you really love making things that can make our world better. Thank you so much for sharing your idea.. Godbless you.

@phototrb 4 жыл бұрын

Fantastic job....congrats.... Really want see the work of those who down voted....are they capable of doing better than this ?

@TinC33 4 жыл бұрын

Thanks man, there are always will be people who downwoted, i see videos with so many works in it but still downwotes, people just hit it if they don't liked, i know my biggest problem for downlikes is background mucic, but video with my english and without music just don't go :) Heave a nice day Balu

@phototrb 4 жыл бұрын

@@TinC33 Thanks.....once again I say, your job is great and would like to see more of your work.

@alialabade1234 4 жыл бұрын

I want to buy a lathe like yours Can you please give me a link so I can order one ?

@newthinkofficial 3 жыл бұрын

Please, one video on multi directional valve...

@over2seeyer 6 ай бұрын

nice work can this valve be scaled up and used in industrial hydraulic ?

@TinC33 6 ай бұрын

Sure it can be, but industrial valves specially hand ones are so cheap... And they are bigger so its easier to make valve as it should be, so they opening ports with piston, precize here is on high level, this type of valves i think only used in rc, because they are so simply that can be make in really small dimensions.

@over2seeyer 6 ай бұрын

@@TinC33 >but industrial valves specially hand ones are so cheap... proportional électro valves are actually quite expensive

@TinC33 6 ай бұрын

@@over2seeyer i know also basic electrical ones are much more expencive, i replace about 40 valves and proportional cards on my job, because they were 35yrs old and didn't have evenly speed it's change from day to day, 1pc of electronic and pilot (pilot is small valve wich operate bigger valve) from rexroth was about 2k€ i think 😬

@over2seeyer 6 ай бұрын

@@TinC33 yep, thats way more than i can afford for a hobby

@roykendall5446 13 күн бұрын

Hi, are your plans for the rc hydraulic valves still available please?

@TinC33 13 күн бұрын

@@roykendall5446 it should be, check into video description for the links to google drive.

@topfisioterapia1330 10 ай бұрын

Faz pra vender?

@boostedkingdom3119 4 жыл бұрын

Can you make a video on how to make a hydraulic pump?

@stonebayrocker 4 жыл бұрын

Agree! Would be cool with a diy pump instruction! 👍🏻

@cyklop1977 4 жыл бұрын

agree

@TinC33 4 жыл бұрын

I will try to make that video also, but need some more knowledge about gear cutting (need gear cutter tool) all other i got, also project is entire assembeled in my head.

@stonebayrocker 4 жыл бұрын

@@TinC33 Nice ! Are there any possibilities that you could buy gears? I think that would make the project more accessible/approcable for many of the viewers then?

@stupid-handle 4 жыл бұрын

@@TinC33 You can look this video: kzfaq.info/get/bejne/n6mBicJqz6ivkmw.html It's in dutch but on it's description you can find a website that you can translate. This method doesn't produce a proper involute gear, but I guess the approximation should be good enough to run a small pump, and the good point is that it can be done on the lathe if you're able to index the spindle or the workpiece, depending on how you mount it. Another video for reference would be this one: kzfaq.info/get/bejne/mLeIiph1tZq-g5c.html Which is the first on a series he made. All the best!

@luisvargasayala1 4 жыл бұрын

At the end of the video, you say about a group of valves for more cylinders, could you do the video or share the plans?

@TinC33 4 жыл бұрын

i didn't make it yet, you just need to "extend" the plans a bit. i don't got exact plan for them, just that sketch...

@luisvargasayala1 4 жыл бұрын

@@TinC33 Oh thanks. excellent video. I will be watching the videos and ideas that you raise on your channel. do you have social networks

@TinC33 4 жыл бұрын

@@luisvargasayala1 i got only ptivate fb no TinC33 social acc so far, thanks

@darkfactory8082 4 жыл бұрын

Evo majstra, škoda da ni več takih.. =) Čisto, pol ročno delo s simpl inštrumenti.. Strugalo zgleda kokr optimumka 300 vario, a ne? Drži se in veliko veselja v delu ti želim.

@TinC33 4 жыл бұрын

Hvala, me veseli da algoritem servira posnetek tudi domačemu občinstvu ;-) Stružnica je še precej cenejša varianta, gre za "erba 300" kupljena v interdiskontu leta 2011 za ceno 311e zdaj je cena enake struznice v isti trgovini skorajda 600e, je pa z nekaj predelavami dodelavami odličen strojcek za izdelavo majhnih delov kot je tole, si ne predstavljam delat tega na prvomajski ;-) Lep dan, Tine

@darkfactory8082 4 жыл бұрын

@@TinC33 ;) Servira, servira, vprašanje je samo koga interesira. Uf, sem falu očitno, čeprav se mi je zdela kot optimumka. Jaz tudi imam od interdiskontovcev strugalo Mdb 550, podobne velikosti samo da je daljša. Priznam pa, da je optimumka sedaj veliko bolj precizna, sej je tudi večja, se pa ne pritožujem za izdelavo majhnih delov, ker tudi jaz jih najbrž ne bi delal na prvomajski.. Sicer pa sem bil omejen, ker ima vreteno le fi 20 mm. Sedaj imam 38 in je glih prav za večino stvari. Mojo 550-ko sem pa mislil prodat, a se nisem še odločil. Je pa dober dizajn za servo ventil, imel sem idejo v preteklosti, ampak je bila linearna kot valj z utori.. Bomo videli v prihodnosti, idej imam ogromno, le cajta je premalo.. =( Ne zgubit dobre volje.. = ) Pavel

@jalan4524 4 жыл бұрын

Can you share the PDF plans!

@dharmjitsingh7393 4 жыл бұрын

Hi bro what is your lathe machine make and size please ? Thanks

@TinC33 4 жыл бұрын

Hy bro, my lathe is brand ERBA type 300 its somekind cheapest minilathe, much cheaper (50%) like some optimum or grizzly, but they'r preatty the same, mine cost 300€ year 2011 now in same store same lathe cost almost 600€. Maximum leingh of workpiece is 300mm

@walfangs 2 жыл бұрын

Você tem como enviar o projeto?

@BlackMetalRC85 4 жыл бұрын

👍

@bgrcmodels 2 жыл бұрын

Здравейте от България. Кога ще правите хидравличната помпа

@w.dkalyan6234 2 жыл бұрын

Hi friend namesta 🙏 your hydraulic system videos are super friend i you don't mine please make a video on mini hydraulic pump please

@TinC33 2 жыл бұрын

I will but heave no idea when, because there are so many plans in my head 😉

@w.dkalyan6234 2 жыл бұрын

Friend thanks for your kindly respond 🤗 Friend your reply is very funny 😂 it's ok frnd don't worry my friend please if you don't mine can i tell you which type pump plz 😋

@prasathnagarajan5645 4 жыл бұрын

Where can i buy these o rings bro i need this for my custom hydraulic cylinder 🙏🙏🙏🙏🙏

@TinC33 4 жыл бұрын

I order them from ebay, i think i mention that into cylinder video, they'r pratty cheap few $ for 100pc, but be sure that they'r oil resistance before ordering.

@prasathnagarajan5645 4 жыл бұрын

@@TinC33 thanks bro

@RCmodeleng 4 жыл бұрын

Hello Mr TinC33 .. another brilliant video, I followed your suggestion and watched your valve. Brilliant in design, manufacture and execution, again well done .. You say you are not mechanically trained, but your knowledge, insight and ability to move your thoughts to hard design is the first big step, sizes and detail, impressive, then forward to manufacture. truly brilliant, you deserve more recognition for your work. As a matter of interest which CAD package do you use?? I am conversant with AutoCAD and MicroStation, but I guess you are using a solids modelling package? really enjoy watching your stuff and seeing the execution into reality, I like the idea of a multiblock valve, seems the obvious direction, I have not researched online at the variety of designs, which I guess you have and replicated in miniature, again very well done, I will take pleasure in watching your other vids. I am envious of your workshop. I must do more. You mention your plans are available, that's very kind of you, but where to find them?? Take care and wish you good recovery.

@TinC33 4 жыл бұрын

Thanks man, i know a bit about mechanic because of my job. When i was 18 i employed into fabric (die cast fabric) as elecrtonic maintencer, after finished school i didn't know how to connect 3 phase motor, everything learned on my job, electronics and mechanic need to cooperate really good to solve the problem as fast as can so production line worke again... As i say i work in grqy cast fabric, it's really dirty and rough job every motor got more than 100kg, and also got huge hidraulic generator with lot of hidraulic, afternoon and on night shift the electronic is the only person for fix problems here so wee need to know a bit of everything, from electronic like pc, to 110000v switching, welding, and most important improvising. Well do i need to tell that i use lathe and mill for the first time on my job. Sellary isn't that big. But the job is good, not boring, and learning every day. Heave a nice day and stay health in those days, here in Slovenia everything stopped, and closed from monday.

@sarvgeetsingh8675 3 жыл бұрын

What is the price of a oil pump press system

@TinC33 3 жыл бұрын

Check on www.magomhrc.com

@Maulanaalfatih185 2 жыл бұрын

Mr apakah saya bisa meminta gambar file nya

@yasons9531 4 жыл бұрын

thank you can you make for 3 cylinders

@TinC33 4 жыл бұрын

Maybe once, but need to make video for the pump firstly

@yasons9531 4 жыл бұрын

@@TinC33 ok thanks

@yasons9531 8 ай бұрын

@@TinC33 ok thanks ,iwant to know how i can make easy hydraulik valve block

@TinC33 8 ай бұрын

@@yasons9531 same as single valve just bottom part with more segments, as i shown in cad photos.

@gohst_jonesy_xx7948 2 жыл бұрын

Hi do you make tham and sell them too i cant build them my selve i have no maschins at home :)

@TinC33 2 жыл бұрын

Check at magomhrc.com its a store in spain who sell them cheap

@gohst_jonesy_xx7948 2 жыл бұрын

@@TinC33 thx ,do you olso have 3d models of you’re disigne ? maybe i can 3d brint them wit sla becouse i need only one valve for my rc boat

@TinC33 2 жыл бұрын

@@gohst_jonesy_xx7948 it won't work, there need to be poliched surface, and lot of force inhere, also i don't got stls

@gohst_jonesy_xx7948 2 жыл бұрын

@@TinC33 oke thx :)

@thzzzt 4 жыл бұрын

Pretty neat, but I must say, I'm surprised the barbed connections actually hold up.

@TinC33 4 жыл бұрын

Almost every time need to cut the pipe to get it of.

@tamanchakma9634 4 жыл бұрын

Sir please 100 make a video for hydraulic pump driven motor for rc step by step it is very important for Rc excavator.............

@TinC33 4 жыл бұрын

I will try

@tamanchakma9634 4 жыл бұрын

@@TinC33 Thank you for your reply sir.....I wish you would make it sir

@iptinchan1699 3 жыл бұрын

🙂👌👍✌

@buddhitamang9908 2 жыл бұрын

Hello tina I'm buddhi how to make hydrolic compreser

@TinC33 2 жыл бұрын

You mean hydraulic pump, you only need 2 gears and one of them connected to a motor, i will make a video once...

@mdalaminhosen8774 4 жыл бұрын

Where i find hydraulic generator to buy??

@TinC33 4 жыл бұрын

Magomhrc.com

@mdalaminhosen8774 4 жыл бұрын

@@TinC33 Sir, I didn’t found this same product on magomhrc site....plz give link of this product.......

@TinC33 4 жыл бұрын

@@mdalaminhosen8774 that pumo is about 5y old, they don't make them anymore, but there are few different pumps, with integrated tank, brushless...

@humlakullen 4 жыл бұрын

Yeah, but can u build a mini nuclear reactor..?

@medion1048 4 жыл бұрын

Hi, is it possible to have the drawing files with the relative dimensions of the valves and the hydraulic cylinder? I thank you and I leave you my email .........

@TinC33 4 жыл бұрын

Hy, all i got is plans into description link (download from google drive)

@saklinemallick560 4 жыл бұрын

All ok but what is in your link you shared for Google drive check the link

@TinC33 4 жыл бұрын

Yes there are. Jpg files of plans for the valve 25 and 30mm. Is it not work anymore?

@saklinemallick560 4 жыл бұрын

@@TinC33 no just check the link teacher

@TinC33 4 жыл бұрын

@@saklinemallick560 i checked and all i see is two folder with plans 25 and 30mm valve, what you see?

@saklinemallick560 4 жыл бұрын

I got it teacher Can you please make a video of how to make a hydraulic pump rc

@TinC33 4 жыл бұрын

@@saklinemallick560 i plan to make it yes, but i don't know when.

@Vinodkumar-lr5co 3 жыл бұрын

I want one can you give it me

@TinC33 3 жыл бұрын

I don't got no one anymore, need to make new for the project

@songarden4695 4 жыл бұрын

Made hydraulic pump plece

@TinC33 4 жыл бұрын

I will, please wait...

@eduardodelpinosanchez893 4 жыл бұрын

Deberían de publicarlo en español

@TinC33 4 жыл бұрын

Uf english is already a tough nut for me

@karloplesko7762 4 жыл бұрын

Is it for sale?😁

@TinC33 4 жыл бұрын

Not yet, i just playing with prototipes, maybe some day, because i see lot of interest here... For now visit www.magomhrc.com they, got best prices for rc hydraulic, they got everything...