Looks so easy... Can't wait to try it!!

Same as a grab bar for the shower.

Karen Escalera ghcgkhyu9

It is a paper bead roller. I make and sell them. They are similar to a quilling tool but are easier to use since it has a slot down one side. You can find out more about them at my web site at: www.jpfun.com/paper-bead/tools

PACERGIRL68 I only coat it once I just make sure that the fabric is completely saturated. Once it's dry then you can cut into strips.

Freezer paper is paper that is non stick on one side and the other side can be written on with markers for identification. I can be used to wrap meats for storage in the freezer. I never use it for that however. I use it for crafts. You can iron the non stick side to fabric for making pieced quilts. I have also used it as a non stick surface for making these fabric beads by laying the fabric on the non stick side so the finished, dried fabric sheet does not stick to it. The non stick side is slippery like waxed paper. The zebra scissors are made by Fiskars and I bought it from Amazon.com. The zebra rotary cutter I bought from my local Wal-Mart. Not sure of the brand. I bought it because it was zebra print! I wanted consistent strips, that is why I used the sticky paper universal marking templates that I make. I didn't want to use a ruler and mess up the measurements. That is why I offer the Universal Marking templates.

I hang and dry them like I do all of my paper beads, on my bead drying rack. You can watch the video on how I glaze my beads at: kzfaq.info/get/bejne/icVno6-nzd_FlGw.html

Yes they are water resistant

Thank you

You would have to use a lot of starch to get the same effect but it would work. I would make sure the starch penetrates the fabric and completely dries before cutting it into strips. I have a tutorial on how I starch my fabric for quilting. I am sure this would work for bead making as well. www.jpfun.com/quilting-sewing/qayp/starching-fabrics

Lori Cheatham yes of course you can.

Yes it is.

Since I make the paper bead rollers I used in this video, and I sell them, I just tried each roller and they all worked fine. So even the 5/64" roller works well with fabric.

I found it on Amazon.com. Just do a search for "Omnigrid Ruler Grip Double Suction Cup".

Julie A. Bolduc thank you very much ☺

Julie A. Bolduc 1 day ago I found it on Amazon.com. Just do a search for "Omnigrid Ruler Grip Double Suction Cup".

I use the rolling tools I make and sell. You can get one of my paper bead rollers at: www.jpfun.com/paper-bead/tools You will see all that I offer.

It is a Omnigrid Ruler Grip Double Suction cup. I bought it at amazon.com at: smile.amazon.com/gp/product/B003PA2852 I no longer use it because I made myself a weight that holds the ruler down while I cut. That way, I don't have to apply as much pressure and make my arm or shoulder sore over time. The weight that I made is just over 3 pounds and is made with wood and large heavy washers bolted to it with a metal handle in the middle. I have a page on my web site that shows a picture of it at: www.paperbeadcrafts.com/howto/cutsheets.shtml

I bought mine from Amazon.com. I did a search for Fiskars zebra scissors.

@@JustPlainFun thank you...

You could but the object here is to stiffen the fabric enough so you can cut and roll it with clean edges and no fraying of the fabric fibers. You can use any of the fabric stiffeners that are out there. I have used several in the past for various sewing and fabric craft projects I have done.

Yes they can be made into a necklace. They are water resistant but not waterproof. If you soak them, you take a risk of them un rolling. They are made of fabric so it won't fall apart like paper would. The only way to make them water proof is to coat them with 1 or two coats of a 2 part epoxy resin. I will have to make a video on how I do it. I dip them into epoxy resin while the beads are on a wax covered toothpick or some other stick that is almost the same thickness as the hole in the bead. I make my wax with bees wax and mineral oil and dip the toothpick into it before adding the bead. The bead should also be already coated with at least one coat of a thin glaze before applying the epoxy resin.

@@JustPlainFun thank you!

Yes it would. Basically you want something that will keep the fabric from fraying.

I sell the downloadable templates in my Etsy shop at: www.etsy.com/shop/jpfun Print them out on full sheet sticker paper. You can also just print them onto regular paper, use double stick 1/4" wide tape or glue to adhere the cut strips instead of printing them on full sheet label paper.

It's great to see you again! I can't get enough of making paper beads!

Julie A. Bolduc haha! I'm going to be starting again soon. It's just so much happened and couldn't do anything craftwise.

È una doppia ventosa Omnigrid Rastel Grip. L'ho acquistato su amazon.com all'indirizzo: smile.amazon.com/gp/product/B003PA2852 Non lo uso più perché mi sono fatto un peso che tiene premuto il righello mentre taglio. In questo modo, non devo applicare tanta pressione e farmi male al braccio o alla spalla nel tempo. Il peso che ho fatto è poco più di 3 chili ed è fatto con legno e grandi rondelle pesanti imbullonate ad esso con una maniglia di metallo nel mezzo. Ho una pagina sul mio sito web che mostra una sua foto su: www.paperbeadcrafts.com/howto/cutsheets.shtml

@@JustPlainFun GRAZIE TANTISSIMO!!!!

I bought it from Amazon.com. You can do a search for mirror handle, contractors use them to carefully remove mirrors from walls by adding a "handle" to the glass.

Kathryn Archuleta www.paperbeadcrafts.com is the place to start looking.

Julie A. Bolduc Thank you very much!!

I generally let the fabric dry overnight. That is why I use a drying mat. I can just put the drying mat on my metal drying rack and prepare more while the other sheets are drying.

These beads are meant to for jewelry and not for children. They should not be allowed to get washed with clothing. They are not water proof but only water resistant. I would think they would un-roll if gotten soaked.

@@JustPlainFun Thank you for taking the time to answer.

Freezer comes on a roll, made by Reynold's and can be found on Amazon.com. The paper is glossy on one side and normal on the other. You can iron the glossy side to fabric making it great for all sorts of projects. I use it in applique projects among other types of crafts.

Yes you can. You just want to make sure the threads of the fabric get saturated. You could also wear vinyl or latex gloves if you don't want to get the glue on your hands.

Thanks for that. That sounds much easier and faster.

I like them, why do you ask?

Yes that would work.

Why not? Whatever you want to just as long as the glue mixture soaks into the fabric.

There is nothing wrong with the free template. It is just a downloadable file that does not link to anything and will not access anything on your computer. If you have problems with files downloaded from my site, I would like to know exactly which file is the problem so I can either fix it by uploading a new copy or figure out what else is going on. I have been offering free downloadable files for over 10 years and have never ever heard of anyone having troubles like this.

17 and a half!

That's the thing about freedom...... you do you !!!!

Shut da fukk up you sound rite ignorant...