How to make SOFT VINYL toys at home! Plus ROTOCAST DIGITAL 12!

Рет қаралды 41,239

23 күн бұрын

We review the smooth-running ROTOCAST DIGITAL 12, make a bunch of figures, and find out if it is actually possible to heat cure and pull soft vinyl from silicone molds.
CURING PLASTISOL:
- In an old oven (not used for food), pre-heat silicone mold to 400 degrees.
- Pour liquid plastisol into hot mold and let sit for 2 to 3 minutes to form a semi-cured gel layer.
(The mold will drop well below 400 quickly, so I either set inside the oven w/ door open, or wrap with aluminum foil like a baked potato to keep heat inside.)
- Empty uncured plastisol into a spare container, to be reused.
- Place mold with hollow part(s) back into oven and let cure for 20 to 30 minutes, depending on heat. Oven should be at least 350, but not much higher than 400.
ROTOCAST DIGITAL 12 AVAILABLE HERE:
hackmakemod.com/products/roto...
PLASTISOL FOR TESTING AVAILABLE AT IASCO-TESCO:
www.iasco-tesco.com/
DCB VARIETY HOUR:
/ @dustincropsboy
I make regular videos with the help of direct support.
If you would like to help Steady Craftin keep on going (and receive some extras too), please consider becoming a direct supporter here:
PATREON
/ steadycraftin
DONATE WITH PAYPAL
www.paypal.com/donate/?hosted...
STICKERS, PINS AND FIGURES WHEN AVAILABLE FULFILLED BY US:
shop.crafnation.com/
MUGS, SHIRTS AND MORE FULFILLED BY SPRING:
steady-craftin.creator-spring...
AMAZON AFFILIATE STOREFRONT:
www.amazon.com/shop/thecrafsm...
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.com/RDVIDMICPP.html
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”

Пікірлер: 235

@HackMakeMod 21 күн бұрын

It is such an honor to see the Rotocast Digital 12 featured on your channel CrafsMan!! Thank you!

@TheCrafsMan 21 күн бұрын

Thank you so much for the opportunity, seriously! We're very grateful! I didn't want to mention it, because I know how I get sidetracked from one project to the next, but I'd really like to build something like a large Fisher Price style playset using the rotocaster! ;) :D

@ChadKapper 21 күн бұрын

That would be amazing!!@@TheCrafsMan

@kaitlyn__L 21 күн бұрын

It’s super cool! Is there a way to program a speed curve for the fast-start slow-finish method mentioned in the video? I’m imagining telling the Rotocast the cure time for each resin, and allowing that to stretch/shrink a standard logarithmic curve.

@ChadKapper 21 күн бұрын

Yes! That's totally possible.@@kaitlyn__L

@wayneswonderarium 21 күн бұрын

@@kaitlyn__Li don't know if it's baked into the controller but it should be possible to write that

@sealdoggydog 21 күн бұрын

I love that even though the Crafsman is so proficient in multiple crafts, he will still get so excited by something new and go on a whirlwind of exploration. I remember when injection molding caught his imagination and so now I'm excited to see what rabbit hole of discovery this leads us down 😁👍

@andreelb 21 күн бұрын

The Rotocast is really well designed. I’ve known Chad for several years and you can tell he enjoys and takes pride in making quality products.

@TheCrafsMan 21 күн бұрын

He's super conscientious about the machine's performance, which I admire. He legit wants to know that it does what it's supposed to. Really fine machine, and great guy!

@OliverPickard 21 күн бұрын

Never miss a video from the Crafs Man. You really set the bar for chill wholesome videos

@PerryVonVicious 21 күн бұрын

Thank you for continuing to push the limits of home-production toymaking... and then sharing the process! Your videos are so informative, while always being entertaining!

@DatHandle 21 күн бұрын

Lol. Loved the Event Horizon remark. 😂

@elenaschmidt9476 20 күн бұрын

I love how different, but still distinct your son's sculpting style is! That's really cool

@joshsmith4488 21 күн бұрын

Crafsman is a mixture of Bob Ross, Mr Wizard and the cinematics of Alton Brown. Pretty much perfect for my Gen X sensibilities. Thanks so much.

@rainbowditto9033 21 күн бұрын

Hearing crafsman get so excited at the successful vinyl pull had me grinning from ear to ear! The joy is infectious!! :DD cant wait to see what you guys do with this awesome new method of making toys!

@jeremysmith4620 21 күн бұрын

You've got the spinny, flippy thing (Rotocaster) so we can finally have a toy become The Lawnmower Man. Hooray!

@cjcarver6290 20 күн бұрын

Lawnmower Man? Stephen King's Lawnmower man?

@jeremysmith4620 20 күн бұрын

@@cjcarver6290 That is an interesting and sticky question. The movie "adaptation" of Stephen King's Lawnmower Man, which King later sued to have his name removed from because it was a mixture of King's story and another titled "Cyber God." That name is hilarious due to the connotations the word cyber gained in the early days of the internet. I am referencing the film when Jobe, the titular Lawnmower Man, is in a large Aerotrim, or multi-axis trainer, that pilots, astronauts, and web based deities all use to train. Seeing this awesome Rotocaster immediately brought this insane movie to mind. Hope that explains it!

@TheCrafsMan 20 күн бұрын

Haven't heard anyone reference this film in a whiiiiiiiiiiile! :D

@idontknow46 20 күн бұрын

You can tell the crafsman is pumped for this, he’s talking faster. Big ❤crafsman

@CharacterDesignForge 20 күн бұрын

This is absolutely INCREDIBLE. I remember hitting the last page of Google search results back in the day trying to figure out how to rotocast vinyl without placing a huge order to a factory- this is groundbreaking! So exciting!

@Gamma7DroidSecurity 21 күн бұрын

The soft figure saga continues! Can't wait to dive into this one, Crafsman!

@wiresmith2398 21 күн бұрын

Crafsman, that is very very Event Horizon - especially 'cause we don't need eyes where we're going, we can play with them nice soft figures with our fingers!

@arvaniaconstructions 20 күн бұрын

I love how much you get excited about this topic! It's interesting and I really enjoyed this relaxing, yet teaching episode, Crafsman!

@oddsparten13 21 күн бұрын

Please do more ASMR in the shop! It is some of the most relaxing stuff on the planet!

@KaijuSommelier 21 күн бұрын

It's amazing that home-made sofubi are a reality! Thank you for this wild and exciting video and all of your work on this!

@TheCrafsMan 20 күн бұрын

Hey, thank you for the motivation along the way! I'm still pushing to make it better (I think incorporating metal will maybe help). :)

@_end3rguy_ 21 күн бұрын

I remember getting a little soft vinyl alien dude at an arcade a long time ago

@NubbyEvo 21 күн бұрын

I didn't not expect a reference to The Pixies "Where Is My Mind?" in a Crafsman video!

@katstorm13 21 күн бұрын

He's mentioned some of the music he likes before, and there were some that leaned alternative like The White Stripes, and I might be mis-remembering, but it was that Depeche Mode was a favorite. As someone who got Violator...(on cassette lol) for a high school graduation gift that resonates.

@volttherobot 19 күн бұрын

I think the fumes finally got to him... heh

@derekrife9214 8 күн бұрын

Love your channel Crafsman. I'm so happy that you can pursue your passion in this way. Just got my stickers in the mail. Thank you so much. ❤ I am blessed by having you here. Thank you.

@TimothyONeill_84. 21 күн бұрын

Love it when you do that retro 70's style filming.

@JonathanB822 21 күн бұрын

So happy that my DIY sofubi method worked out so well for you! The flexible silicone looks like it is the way to go for this! I think you forgot to mention my name, but it's all ok!

@TheCrafsMan 20 күн бұрын

Jonathan, did I not mention your name?!? :| I have it noted (from when I asked how to credit you) so I thought for sure it went into the voiceover. I hate to have missed it. I'll make it up to you since I'll be working on more soft vinyl content. Holler at me on email when you get a chance - I want to send you some of these vinyl figures.

@CryptoRulz 21 күн бұрын

Two of my favorite channels working together!

@Lee-Dixon1987 21 күн бұрын

Also, I don't know why, but super 8 style footage (I wouldn't be surprised if you used a real super 8 camera for that) is so satisfying!

@babaganoosh1969 21 күн бұрын

Ive seen sand casting...lost wax casting...even a guy who rotocasted plaster to do metal parts... there's always options or a way...not going to lie...im a little jealous of the new rotocaster....lol

@willhook3689 20 күн бұрын

wow these videos are incredible. Not only are you great at communicating and educating. But the detail and quality of the video production is also top notch. Great work

@TheOneTwitchingDeadGirl 21 күн бұрын

"I have mo desire to ever watch again" 😂 The amount of times I've said that about a "blockbuster" film.

@GaryOshust 21 күн бұрын

Awesome work from you and your whole Craft family!

@TwospotzArtAndCraft 21 күн бұрын

These lil critters are adorable! Glad you found a good way to make them in vinyl! 😊

@mowermanone1621 20 күн бұрын

The smooth easy listening of the craftman. I enjoy your videos, thank you for your work.

21 күн бұрын

I love these videos. Such a chill style and awesome to see the rotocast digital 12 in action 😊

@gedion4000 19 күн бұрын

I need to thank you for making these videos. I have been thinking about making my own toys like this for a while now and really didn't know where to start. even contacting some of the other sculptor/casting KZfaqrs seeking advice has left me with an empty inbox. i really appreciate all the work you have put into this.

@honey_bee_live 20 күн бұрын

I always feel like I’m settling in to watch my favorite TV show when I see a post from TheCrafsMan!

@aaronyap3249 21 күн бұрын

holy sh*t how timely!! making toys rn, and this upload is what I needed. TQ CrafsMan

@pherja 20 күн бұрын

You legit do not understand what you’ve done. You broke down the giant iron doors of sofubi and opened the kingdom to EVERYONE. I’ve had this idea in my head for a while now, but couldn’t figure out the heating part. I don’t have the space for a large oven (japan…) so it wasn’t something I could test. But you could, and you did, and it works. I feel validated. I’m figuring out now how to get a small oven shoved in here somewhere… 😅 Wow. You have my eternal thanks for this. 🙇‍♂️ (you also basically made rotocasting unnecessary)

@TheCrafsMan 16 күн бұрын

Hey, thank you SO MUCH for the encouraging words! I really do get a lot of motivation from comments like this. ALSO... before getting an oven, consider taking a look at the chemical/"fryer" type units. This is the next thing I want to try, because it's closer to what's done overseas, and I have a feeling it releases less fumes than oven-curing (although I do have a vent pulling fumes through a carbon filter to outside, as well as a respirator). I'm wishing you success!

@doublezero7850 21 күн бұрын

So exciting to see you working on this stuff! I'm definitely in the market for a benchtop rotocasting machine, and that one definitely fits the bill. And that VINYL - So amazing to see a DIY version!

@TheCrafsMan 20 күн бұрын

Hey buddy! Thanks so much, as always! I really appreciate you. And I neglected to show in the video, but the inner and outer rotation speeds can be set independently. :)

@HandleToBeDetermined 21 күн бұрын

Finally, a soft-vinyl-at-home video! There's surprising few resources on it on YT. Glad that you decided to try a hand at it!

@CarlKeeling1881 21 күн бұрын

Just sit the jars of resin in a dark place if they're in clear jars or in brown paper bags in a cabinet.

@volttherobot 21 күн бұрын

SO EXCITED about this!!! SOFUBI! xoxo

@slumbur- 21 күн бұрын

wonderful to hear your son involved in the process, that shirt figure looks so cool!

@davidalau 21 күн бұрын

I was thinking to make a comment suggesting using metal dust to impregnate the si molds. Then a moment later the magic sock was adding copper. Brilliant. I may never make sufubi but watching your and Craftsfams progression is a wonderful thing. Thanks again for sharing your excitement with us all. I’ve had an exciting idea about tesselating motion sculptures that need molding skills… I’m too shy to ask.

@joaomiguelxs 21 күн бұрын

big love to the one and only. big love!

@Lee-Dixon1987 21 күн бұрын

So psyched this came up during my lunch break! Always worth the wait, sir! God bless!

@znbrtn 21 күн бұрын

Fantastic, entertaining, educational video, as always. You do such wonderful work, Crafsman. How often did you have a failed figure once you got the gang molds running?

@TheCrafsMan 21 күн бұрын

Usually it'll be a situation where the whole batch is under-cooked, or either they all worked. I HAVE had a couple times where the end figures in the gang mold cured better than the inside, but like I said, it's usually all or none. It will depend on your mold size/thickness as well as oven capabilities (ie. is it a convection, etc.?). We've also thought about whether or not an "air fryer" would work.

@chumon1992 21 күн бұрын

This is so cool! I love the feel of vinyl toys. It would be so cool to see a full playset in your style.

@Catbox_Monster 18 күн бұрын

Heheheee, you're so excited and happy, this was a blast to watch xD So happy for you, Crafsman, can't wait to see more!

@nexviper 21 күн бұрын

Opening with Event Horizon and closing with the Pixies. Class.

@UncleJessy 21 күн бұрын

Oh man rotocasting is so friggin cool

@DarkWheel 12 күн бұрын

Amazing. Simply amazing. Thanks for breaking down the soft vinyl wall!

@BRUXXUS 21 күн бұрын

Ooh! I’d never even considered rotocasting could be viable at a hobby/small scale before! I would just sit and watch that thing and be mesmerized by the movement. 🤣 Just like with my 3D printers… 12 years later and I still love watching them print. I wonder if there’s a way to combine rotocast with heating the vinyl suspension stuff. 🤔 Heated spinning vats of liquid may be a little too spooky. Haha

@danthemakerman 21 күн бұрын

Man you can hear the excitement in your voice at the very beginning of this video. I knew it was going to be a good one! Then again, they are always good!

@Skeptycx 19 күн бұрын

I look forward to these every time.

@bobsmith5088 21 күн бұрын

Amazing dedication to experimentation.

@andy-in-indy 21 күн бұрын

Pewter would melt at the temperatures you are using but Zamak (zinc & Tin) melts around 700F and can still be molded with high temp silicone molds. You might look into a Zamak sleeve/shell/matrix for your silicone gang molds. Also, Zamak molds will hold up longer than silicone or resin for injection molding.

@TheCrafsMan 21 күн бұрын

Thank you! Zamak! I bet that's what they use in a lot of the Mexican injection molds, as I've seen them make some from pewter (or plaster then pewter). I appreciate the info, Andy!

@BrooksMoses 19 күн бұрын

Small pedantic point: Zamak is zinc, aluminum, magnesium, and copper -- thus the name, which is an acronym. (In German, so it's Kupfer rather than Copper). For people who don't know: It's what most diecast toys are made out of. And you have to be careful about impurities, because otherwise it will get "zinc pest", which is what causes some old diecast toys to crack and crumble. Nifty to know that it can be cast with high-temp silicone! A zinc-tin alloy might also work for this; it looks like you can get those as solder, and melting points range from 300F to 650F depending on ratios. Interestingly, the primary use is for soldering aluminum, which I didn't know was possible. I'd guess Zamak is cheaper, though.

@vinylwonder 17 күн бұрын

Crafsman you are a genius!! This is mind blowingly cool man

@Arkie80 15 күн бұрын

Thank you again for sharing what you learn with us. Bless y'all CrafsFamily.

@TheseAreShapes 20 күн бұрын

What Crafsman!!! The shoutout I wasn't expecting that LOL I just flipped out

@MechanicalPencilGirl 21 күн бұрын

Awesome video. Even after finding out the entire Sofubi making process I decided that I'd still want to go the way of the silicone mold. I think I will consider an electro-plating setup for doing chrome and metal on plastics. Video actually helped figure out some things I wasn't sure about. Thank you so much!

@heathercrumly1083 20 күн бұрын

I gotta just give it up to Caftsman and CraftsFam for making this content. Thank you for sharing your art and also being willing to show the failures and process!

@moi5219 18 күн бұрын

Ma, been watching you for ages. Your vids always give me the good vibes. Thanks! ❤

@sablemoreno5095 18 күн бұрын

I have no idea how i got recommended this video but im fascinated and have to check out all the other ones now

@mattmadolah 21 күн бұрын

@thecrafsman , You make the bad days brighter. Thank you for being a springwell of inspiration to creatives, and a positive encouraging role model to other creatives. STEADY CRAFTIN Friend!

@GDub1958 19 күн бұрын

Wow your channel is such a positive vibe while learning something new! This is what our model should be for our school systems CrafsMan

@feralfarmgirl 19 күн бұрын

Doll and figure creators rejoice! 😁

@gogglesfpv7986 13 күн бұрын

hands down your production is amazing! Thank you for your work!

@bonce 21 күн бұрын

'..a movie I have no desire to ever watch again' Me too Mr CM, me too. Glad I watched it, bad movie to watch when exhausted though.. very bad.

@danjaworsky 21 күн бұрын

I always love seeing these videos. Makes me happy

@HavasiP 20 күн бұрын

Was that a little bit of Pixies - Where is my mind? Lovely video as usual. You're excitement is infectious.

@TrevorAndersen 21 күн бұрын

Wow, Crafson is really talented!

@QueenQuill 21 күн бұрын

I love this! Such great information, thank you!

@sclogse1 20 күн бұрын

Event Horizon is our Thanksgiving day post dinner relaxation with the family moment. What a spook show. Amazing sets, and then chomp chomp chomp....

@marcbohlen7105 19 күн бұрын

Love me some Pixies……and some Crafsman of course. Once again happy to see you get excited about your new toys.

@OomPapaMaoMao 21 күн бұрын

Crafsman you never fail to amaze me. I have loved watching your channel from when it was a lil one to now!

@ebmage8793 21 күн бұрын

Thank you. Sometimes, Im not very motivated to work on my own crafts. But your videos always get me pumped up to try out the tips on my own. Thank you so much for being you, Crafsman

@katstorm13 21 күн бұрын

I love seeing you get so excited for doing something you've always wanted to try! Love the Pixies reference as well.

@georgeaura 21 күн бұрын

That's crazy how you can find 3d printers that make things from raw material for cheaper than some that just does constant rotations in different directions.

@crackin2000 21 күн бұрын

You are a toy astronaut who happens to also make toy astronauts. That's deep stuff right there.

@cerisekappes580 19 күн бұрын

Wow!!!! Glad you kept going! Awesome!!! ❤

@cjcarver6290 20 күн бұрын

Thank you so very much for discussing safety! Listen up, y'all.

@TheRetroTinker 20 күн бұрын

Absolutely mind blowing stuff Crafsman!! Fantastic video!!

@bryandavis2070 21 күн бұрын

Finally, somebody that feels the same way about event horizon as I do!

@tetohh12 21 күн бұрын

Thanks for all the info and encouragement. :)

@StandyEmerson 21 күн бұрын

It's here!

@jonbauml225 20 күн бұрын

You make us all so proud

@Morganistalking 20 күн бұрын

I thoroughly enjoyed this video. Thank you.

@user-my1vi8wt8g 20 күн бұрын

I love the fact that Crafsman and Crafson watch One Punch Man and anime. That is awesome to hear.

@drdiabeetus4419 2 күн бұрын

Hey Crafsman, I got a neat trick to calculate volume in in weirdly shaped molds. Just fill 'em with water or another liquid of your choice and then pour that into a measuring cup.