How to make sturdy 2x4 garage shelves easy or complicated!

Рет қаралды 447,026

7 жыл бұрын

This storage shelf solution can be made as easy as putting up some 2x4's or as complicated as building large shop cabinets. I like the way that the storage cabinets came out in the end, and as the video explains I enclosed everything to keep the shop sawdust off of everything we store.
---------------------------------------------------------------------------------------------------
Hinges and guide can be found here (affiliate link):
amzn.to/2iLJYIP
amzn.to/2j0UH17
Wanna help me make more videos?
This link is for stuff you need on Amazon, not just what I use in my projects. Please BOOKMARK my Amazon affiliate store as a way to help me when you shop for ANYTHING on Amazon:
www.amazon.com/shop/hubbardsh...
---------------------------------------------------------------------------------------------------
Follow me on:
Twitter- @RyanisLucky
Instagram- hubbards_handmade
Facebook- HubbardsHandmade
Music:
IntensiveBeats - Strong Beat (Hip-Hop/Rap Instrumental)
/ strong-beat-hip-hoprap...

Пікірлер: 379

@Hubbmade 5 жыл бұрын

This is by far the most watched video on my KZfaq channel! I just wish I'd done a better job explaining things... Feel free to ask your questions here and I'll do my best to get to all of them. Please subscribe and thanks for watching!!

@xrain099 5 жыл бұрын

Very nice demonstration. This is exactly what I planned for my garage, basic 2*4 shelf and adding doors later if I want. Just have one concern: when I check 2*4 shelf designs around youtube, lots of comments are against the idea of putting weight on screws. For example, this one: kzfaq.info/get/bejne/pZpgnq6Tlb3UXYk.html&lc=UgyBS9jao4SECld-uql4AaABAg, and this one: kzfaq.info/get/bejne/bMeUY5qrnbaVZ6c.html&lc=UgzcmCNvWGlcV9SDlRF4AaABAg. What's your opinion from your two years' experience with those shelves? Would glue help? Shall I double up the 2*4s under shelves to transfer the weight? Thanks a lot.

@Hubbmade 5 жыл бұрын

Xirun Chen I have had absolutely no problems with the shelves. Some people said that 2 x 4’s were the wrong thing to use and plywood would be better, however I have had opportunity to remove some of the 2 x 4‘s to fit tall things in the shelves and was very glad that I didn’t have to cut out some plywood. As far as the screws go I haven’t had any break but if you’re concerned about it glue would probably help. I see what they’re talking about but it seems like an unnecessary concern. Either that or I used more screws than I really needed to and “overbuilt“ the shelves. Best of luck on your shelf project!

@chunkyburp 5 жыл бұрын

Watched is true because you can't hear it.

@lanceferguson7159 5 жыл бұрын

Hi, quick general materials list and rough cost estimate? Thx 😃🍀 P.S. Really nice family...our kind of neighbors.👍👨‍👧‍👦🤠

@kkutube1972 4 жыл бұрын

This is the best for the garage shelving.

@SUFFERFOOLS 6 жыл бұрын

Man, humility is a nice trait, but you deserve big props. Nice work. And cool dad for sharing air time with the missus and setting your son on the road to manly stardom!

@Hubbmade 6 жыл бұрын

+SUFFERFOOLS thank you so much! Your kind words (and trolling the trolls) much appreciated!

@russodonnell9000 4 жыл бұрын

Really great video. I've been watching so many and none of them offer a simple DIY solution for great looking cabinets. Nice job and thank you!

@rh-cv3nr 4 жыл бұрын

What a great video, I love everything about it from the idea of the shelves, to the humor used in your narration, even the editing with the moving boards was cool. Thanks for going to all the work of making this video, very entertaining.

@tubojesse 5 жыл бұрын

Great Video, I think you did a good job on illustrating the basics of building garage shelves. Thank you! Love the son part.

@brianbergstrom9579 4 жыл бұрын

You did a good job. Nice to have your family help you. Thanks for the video.

@Hubbmade 4 жыл бұрын

Thanks for watching!

@LeRoyandLunYa 7 жыл бұрын

I'm looking at doing me closest...... I loved the framework...... simple and easy to understand........Thanks you

@kaycox5555 7 жыл бұрын

Great team!~ Fabulous work!! Thank you both for sharing and posting..

@JoseSanchez-rq7mh 7 жыл бұрын

That is sweet!! Definitely on my summer project list!

@Hubbmade 7 жыл бұрын

Jose Sanchez thanks for watching! Best of luck!

@gperson1967 6 жыл бұрын

Your shelf pieces were very magical.

@Hubbmade 6 жыл бұрын

Thank you! A lot of effort goes into that stop motion stuff…

@jamesbinger29 4 жыл бұрын

I Am impressed hope mine come out that good. Don’t have all your tools but 2ill do my best. Thanks for the video

@Mbmoney1217 7 жыл бұрын

Nice simplistic design. I was overthinking my design. Great video!

@Hubbmade 7 жыл бұрын

Thanks! That's why I make them! (Videos)

@fredberger2451 Жыл бұрын

Definitely love this. Thank you

@richpickard1680 6 жыл бұрын

Awesome job I'm going to do the exact same thing

@livinwrightnow9508 5 жыл бұрын

This video was so well made and descriptive I actually think I could build this myself. And I've never built anything that didn't come with an instruction manual before. Lol. Great video!

@Hubbmade 5 жыл бұрын

Thank you for the wonderful complement! Good luck with your projects!

@orangesspain3623 2 жыл бұрын

You are hilarious. I enjoyed smiling while learning to build garage cabinets.

@jthomashnick 5 жыл бұрын

So many DIY's without safety glasses. 😎

@paulkelm6550 5 жыл бұрын

Nicely done! Overkill on the build, but looks really nice. It's a funny video. I appreciate that you didn't overdo the talking and did a very good job of showing. I love the son part and the animated 2x4s marching into their places. Great job!

@srikaset 7 жыл бұрын

It's the show of a whole family members. Love it. Thank you.

@Hubbmade 7 жыл бұрын

+Mekong Giant thank you for watching!

@svenwesterlund3405 5 жыл бұрын

Thanks for sharing, needed inspiration for my build. Was not feeling the need for doors, but that kinda changed now...

@Hubbmade 5 жыл бұрын

I’m so happy this helped! Good luck

@champstewart1211 5 жыл бұрын

Great video love that you got the family involved

@Hubbmade 5 жыл бұрын

Thanks a bunch for watching!

@roshawnsims8390 7 жыл бұрын

Ryan you are the man! The only time I can get my wife in the garage is to get in or out of the car or tell me it needs to be cleaned up from all my little projects.

@Hubbmade 7 жыл бұрын

HA! Thanks man! Subscribe for more to come!

@gfourmacman 5 жыл бұрын

This looks like the right way to build some shelving! Great video. I plan on making several units for my garage and basement.

@Hubbmade 5 жыл бұрын

Great ! Thanks for watching!

@classic287 5 жыл бұрын

gfourmacman, use plywood for the platforms, not so labor intensive...

@farivera2815 2 жыл бұрын

Looks really nice

@talee7224 6 жыл бұрын

Looks good. Nicely done, I like it!

@Hubbmade 6 жыл бұрын

Thanks a bunch!

@thegoodraj 3 жыл бұрын

Great video, exactly what I was looking for! Thanks

@Hubbmade 3 жыл бұрын

Thanks for watching!

@kpavery1 5 жыл бұрын

Looks great.

@utahnick 5 жыл бұрын

Those turned out real nice

@Hubbmade 5 жыл бұрын

Thanks so much!

@Laffy1345 6 жыл бұрын

Strong shelves, you could put alot of heavy stuff on those. Good job.

@BAMBAM-le7zz 7 жыл бұрын

you guys are awesome. Great Build buddy.

@Hubbmade 7 жыл бұрын

Jose Becerra thanks Jose! We had a good time

@nrmasson1 3 жыл бұрын

I've got to say that this was the funniest video I have seen. I was cracking up so much when you were talking about your son (and the comments you inserted). Thank you for a very informative and entertaining video. You have a great sense of humor and are a competent carpenter in my book.

@Hubbmade 3 жыл бұрын

You’re very kind! Thanks for watching!

@maxchen4418 4 жыл бұрын

0:57, that’s the best “Vise” ever!

@mandeepgill3391 3 жыл бұрын

Shelves looks awesome

@Hubbmade 3 жыл бұрын

Thanks a lot!

@ThriftyGarage 7 жыл бұрын

I think this project turned out excellent. I want to do something similar in my garage.

@Hubbmade 7 жыл бұрын

Thrifty Garage Thanks! I'm really happy with how it came out! Check out this can storage improvement I made too! kzfaq.info/get/bejne/hq9mmM-VlsuxmXU.html

@stjameslee 4 жыл бұрын

AWESOME LOVE WOODWORKS

@dinger3265 4 жыл бұрын

Nicely done.

@randysears7297 2 жыл бұрын

Looks good.

@focused313 6 жыл бұрын

Excellent vid. Nice and cheap.

@Hubbmade 6 жыл бұрын

thanks! its working great!

@bmovie5002 6 жыл бұрын

Agree with the shelve comments. I don't have the time to cut all those 2x4s. Home center would have ripped the plywood. And plywood is engineered for the application. 2x4s aren't engineered for lateral loads on the face. That being said the span is short enough to not be an issue. This is not to be critical but to help others who are looking to build. In many ways this project could be accomplished faster, better and cheaper.

@bettyescookingchannel 4 жыл бұрын

Great job!

@rebeleazy9221 5 жыл бұрын

Darn good job. Looks good. Good commentary.

@Hubbmade 5 жыл бұрын

Thank you for your positive feedback!

@martinalvarez3271 5 жыл бұрын

Thanks for the vedeo!!! Nice work!!

@Hubbmade 5 жыл бұрын

Thank you for watching!

@shahrupeshb 5 жыл бұрын

Super, thanks for sharing

@Hubbmade 5 жыл бұрын

I’m glad it can be helpful to someone! Thanks for watching

@shahrupeshb 5 жыл бұрын

@@Hubbmade i am starting to work on half of your storage in my garage using your guidelines.

@ryannelson4317 3 жыл бұрын

Complete 222% more work with a son!!! 🤣🤣 Thanks for the video. This helped me out a lot. Just bought my first home and I am dying to build gararge cabinets just like yours.

@Hubbmade 3 жыл бұрын

Thanks so much for watching! I hope it helps.

@Herschel1738 3 жыл бұрын

OMG, Love your t-shirt!

@Hubbmade 3 жыл бұрын

Thanks! LOL

@TJSWOODWORKINGSHOP 7 жыл бұрын

I like the storage shelf my brother there are awesome good job :)

@Hubbmade 7 жыл бұрын

Hey, thanks, TJ!

@TJSWOODWORKINGSHOP 7 жыл бұрын

No problem my brother :)

@Jofsaxony 6 жыл бұрын

Lotta negativity in the comments. I dug it, and it resembled how a lot of my projects go. Saving it as reference for my own cabinets.

@Hubbmade 6 жыл бұрын

Thanks a lot Jason! I’m not sure why there’s so much hate for the 2 x 4 shelving. It’s overbuilt, but we are storing heavy things and I know that this will never sag.

@Jofsaxony 6 жыл бұрын

Hubbard's Handmade, I'm a serial over builder. There's a several hundred pound chicken coop in the yard or furniture around the house with extra railings or supports to prove it. If it costs more I really don't care - it usually resulted from me going off script with someone else's plans and/or it can survive my kids being kids. Both are satisfying.

@Hubbmade 6 жыл бұрын

Exactly! More than a few armchair quarterbacks just don’t get it… 😉

@thebman8787 4 жыл бұрын

Wow just wow!!

@wonderfullife7629 7 жыл бұрын

Very nice, thank you for sharing. :)

@Hubbmade 7 жыл бұрын

you betcha!

@marklidasan7361 7 жыл бұрын

Its awesome! I wish I have the talent. Great guy with great family included the cat.

@Hubbmade 7 жыл бұрын

Mark Lidasan thanks a bunch!

@DCEnterprise2005 7 жыл бұрын

Mark Lidasan You do have the talent dude, you just have to go out there and do it!

@KJ-yq5gm 4 жыл бұрын

Nice work!

@Hubbmade 4 жыл бұрын

Thanks!

@CASPER63074 5 жыл бұрын

Great job 🙂👍

@Hubbmade 5 жыл бұрын

Thank you for watching!

@sduenas83 4 жыл бұрын

Damn was skeptical at first but actually looks nice afterwards thanks for the inspiration for a simple way to make something nice

@Hubbmade 4 жыл бұрын

Thanks for watching!

@heru-deshet359 6 жыл бұрын

You succeeded in making a simple thing complicated, but the end result is nice.

@Hubbmade 6 жыл бұрын

Thanks for your interest

@ACoustaDC 4 жыл бұрын

Wow, so jealous, they look great. I have a Lucas for a son..... and I am his faaawwthah

@Hubbmade 4 жыл бұрын

Lol nice!

@riosomar7826 5 жыл бұрын

Simple but very nice!

@Hubbmade 5 жыл бұрын

I appreciate it! Thanks for watching

@riosomar7826 5 жыл бұрын

Sir, may I know the size of screws you used?

@Hubbmade 5 жыл бұрын

The 2x4s got 2.5 inch screws. Any pocket holes got 1.25 inch screws

@wayne_3791 Жыл бұрын

No words!

@MrRahluv357 3 жыл бұрын

NICE, I should have done this

@Hubbmade 3 жыл бұрын

Do it!

@carlosventura1546 5 жыл бұрын

Woooow look great and cheaper thank you shake video

@sunnindawg Жыл бұрын

Excellent

@SOUNDINTHECITY 5 жыл бұрын

Good stuff man

@Hubbmade 5 жыл бұрын

Thanks for watching!

@naptownsfinest2345 7 жыл бұрын

great video

@Hubbmade 7 жыл бұрын

naptownsfinest2345 thanks!

@acanova2001 6 жыл бұрын

I actually love the way it looks finished at the 4:30 part of video. I think this is the plan I am going to do. Then paint it white to contrast the grey walls in my garage

@Hubbmade 6 жыл бұрын

+acanova2001 Thanks! That’s the great thing about doing it yourself… You can get exactly what you want!

@RoomiesGarage 7 жыл бұрын

love the title and the video was entertaining

@Hubbmade 7 жыл бұрын

Roomies Garage thanks for the feedback! Subscribe for more!!!

@daveengstrom9250 6 жыл бұрын

Next time you use those European hinges, put both in the holes, then put a straight edge (level, carpenters square etc) actoss the back of each to ensure they are parallel to each other and not binding. The way you did it, follows the top and bottom of the doors, not necessarilly parallel.

@Hubbmade 6 жыл бұрын

Great tip, thanks!

@keithspringdiyguy4562 5 жыл бұрын

Get yourself a son. My favorite part. Lol. Good job

@AndyPutt1 4 жыл бұрын

Awesome shelves.. great job... Can I ask how much everything cost? Thanks

@saidelainani7467 5 жыл бұрын

Bravo

@bitcoindan5581 5 жыл бұрын

looks like a hardy shelf system!!

@Hubbmade 5 жыл бұрын

Thanks! It’s been working out really well

@angelborja4407 6 жыл бұрын

Great video! What kind of plywood did you use for the doors?

@dlroto 7 жыл бұрын

I'm surprised you didn't use plywood for the shelves.

@smooveb191 7 жыл бұрын

word looks like he wasted 2 x 4

@Hubbmade 7 жыл бұрын

2x4s are cheap. I would probably use plywood if I made it again... but its not a "waste"

@smooveb191 7 жыл бұрын

just seem like you had to make a whole bunch of cuts but if it works for you that all that matters.

@mariannesfunventure6211 7 жыл бұрын

I was going to say the same thing but hey if you have all that time to spend on cutting why not. We used plyboards on ours bought it at Lowe's we took our measurements they cut it for us and the doors saves us time.

@arturnowak879 6 жыл бұрын

Very nice job, I'd like to be so talented

@CLMcIntyre 7 жыл бұрын

What a fun, informative video!!! thank you!!! Just wondering if it's beyond my skill level!!!!! :-/

@Hubbmade 7 жыл бұрын

Bunny McIntyre thanks for watching! It's mostly just planning. Not too difficult of a project.

@samvoysey8270 7 жыл бұрын

Nice work mate. Not sure why you used 2x4 for the shelves instead of ply but that's just me. The doors look great and even better you managed to get the wife out there to help!!!!!

@Hubbmade 7 жыл бұрын

Thanks for watching! If I was going to do it again I would do a few things differently. But for now they work great!

@deadlyshotta2893 7 жыл бұрын

you make this look way easier then it is. :)

@Hubbmade 7 жыл бұрын

Patrick Sanders you did see the part where the camera stand broke, right? And also the part where I measured the front face frame incorrectly? Just making sure… xD

@deadlyshotta2893 7 жыл бұрын

Hubbard's Handmade turned out really good. building some shelves in a open closet space, found this very helpful. cheers :)

@Hubbmade 7 жыл бұрын

wonderful to hear!

@deadlyshotta2893 7 жыл бұрын

Hubbard's Handmade you made me thero at my job. i do maintenance. turned out beautify. thanks for taking the time to create this.

@Hubbmade 7 жыл бұрын

Patrick Sanders that's fantastic! Thank you for the kind words!

@BronkBuilt 7 жыл бұрын

Great video! May I ask why you used 2x4's for the shelves instead of 3/4" plywood?

@Hubbmade 7 жыл бұрын

You really could make it either way, but I knew the 2x4s would be strong enough for me to crawl around on and wouldn't sag over time. If I were going to do it again now I would use 3/4" plywood to save a little room for more storage. Thanks for watching! subscribe!

@mot2ba601 7 жыл бұрын

great video really love it, going attempt with my garage this week, can you tell me which stain/pain you're using during the process.

@Hubbmade 7 жыл бұрын

Alex Vo we used prefinished plywood. It was a little more expensive but we Didn't want to mess around with painting or staining.

@DankUrbanBoss 6 жыл бұрын

Honestly this video made me laugh so hard. I didn't see those boards moving themself coming

@Hubbmade 6 жыл бұрын

Thanks! Glad to hear it!

@acemany1126 3 жыл бұрын

Stop lying just to please the white man!!

@DankUrbanBoss 3 жыл бұрын

@@acemany1126 😂😂

@ureasmith3049 4 жыл бұрын

Nice jobs, I recommend hearing protection though with those tools.

@newttella1043 4 жыл бұрын

And eye protection for the saw 2:07.

@x94timberstar 7 жыл бұрын

Gonna try this style next week. Thanks for the inspiration! and general framing idea! I'm going to use plywood for the shelf; 3/4" for the doors as the hinges require 13mm bore depth; I learned a lot about HINGES!and Material Selection!

@Hubbmade 7 жыл бұрын

AWESOME! Good luck and feel free to email me questions or some pics when you are done! ryanislucky@gmail.com

@dr.shiznit344 Жыл бұрын

Nice video... may I asked how those hinges have held up?

@MehulShah007 6 жыл бұрын

Love the idea. Have watched your video with my wife and she wants me to construct the storage in our garage. What kind of plywood did you use for the doors? They look great.

@Hubbmade 6 жыл бұрын

Thanks! Prefinished half-inch plywood. I think it was maple but you can get all kinds of prefinished plywood

@classic287 5 жыл бұрын

I don’t believe I’ve ever seen anything like that before...but I imagine it came out fine

@classic287 5 жыл бұрын

Love the cat... I like the hinges too..

@Hubbmade 5 жыл бұрын

Thanks for watching. It’s been a couple of years and it’s holding up really well

@jeffccr3620 7 жыл бұрын

It is much easier to build the sub base the same hight as the stem. Then overhang the plywood 3" for toekick

@lalilala2001 6 жыл бұрын

hilarious!!! gotta bribe those kids 2 crawl into the small spaces sometimes hehe :-)

@thomasjoyce5710 3 жыл бұрын

Viuivuvoyy

@jgreeter78 7 жыл бұрын

*Sees ad for son* *Calls GF into room* "Baby I need one of these, get over here!" Great vid,

@Hubbmade 7 жыл бұрын

jgreeter78 hahaha! 😂 awesome, thanks! Good luck with that!

@SimonTekConley 5 жыл бұрын

I built a framing wall inside the pole barn garage, totally forgetting about the door, and the realized how hard it was going to be to install. I got around it by maneuvering. Keep in mind there was a truck in process of restoration in the way, with no wheels, so I couldn't move the truck. I actually hoisted the wall over the truck to get it in place.

@Hubbmade 5 жыл бұрын

Man, I've been there... little mistakes and oversights sometimes add up to more work and pain! Most of my challenges are all my fault!

@bradtowne2305 5 жыл бұрын

Lag Screws and options. Only change I would make is to use lag screws to hold up the weight bearing horizontal 2x4's (at the very least on the one connected to the wall. That being said - great design. Something I am curious about. I want to be able to move an 8 foot rolling workbench into the lower level of the shelving unit (effectively ruling out supporting 2x4 beams on the front side except for the sides of the shelving unit). However, my concern is the structural integrity of such a design. I could try to add flat metal support bars to the front horizontal 2x4's to give them additional structural integrity. Or I guess I could also run vertical 2x4's into ceiling and lag screw them into the ceiling support beams. However, my garage has 12 foot ceilings and getting to that height is a bit of a challenge. I love the cabinet option with your design, as it allows for a clean looking storage unit. Any thoughts?

@vicentesalinas8259 5 жыл бұрын

Looks amazing! What type of plywood did you use?

@Hubbmade 5 жыл бұрын

Prefinished half-inch pine plywood. The prefinished saved me a ton of time and it’s lasted really well!

@mihnic0504 5 жыл бұрын

I got 2 Sons. 16 & 17. Im not sure what the warranty is on them but they seem to be defective after about 16 years or so. Lol.

@davidp1241 4 жыл бұрын

Should of bought the extended warranty 🤣.

@cjhuber8728 Жыл бұрын

@@davidp1241 I find the extended warranty is a scam.

@briandemmer1941 4 жыл бұрын

Hello, great video! How thick did you make your doors? Thank you!

@Hubbmade 4 жыл бұрын

I used half inch plywood. Thanks for watching!

@riffmeisterkl 5 жыл бұрын

This is a great build. May I know why you used 2x4s for the shelving instead of just longer ply sheets ? Just asthaetics? Makes it look like a deck floor though, which is a nice variegation.

@Hubbmade 5 жыл бұрын

Two reasons: 1. I wanted the added strength that the 2 x 4‘s would give. 2. Modular design. I have already had to take out a section of 2 x 4 shelf to make room for a water softener which was too big to fit under the lowest shelf. This was easy to do by unscrewing a few 2 x 4 Thanks for your interest in my video and projects!

@rayden2 2 жыл бұрын

Please put a list of everything you got and used example 16 2x4's thank you

@c50ge 5 жыл бұрын

I enjoyed your video!!! how long did this actually take??? how long did it take to video the dancing 2X4's? are you able to laugh at your wife's bloopers? Keep up the great work!

@Hubbmade 5 жыл бұрын

Glad you enjoyed it! We always have a lot of laughs around my house/shop! The shelf construction was done in a weekend plus a few hours throughout the next week. It’s not too difficult of a project... stop motion on the other hand is… Time consuming!

@Davysprocket213 6 жыл бұрын

Great video! My carpentry skills are at a beginner’s level. I’m wondering if doing this is within my capability. I’d love to do it.

@Hubbmade 6 жыл бұрын

Thanks! If you stop at the basic 2x4 shelf stage this is a super easy beginners project. The finishing with plywood might be a bit more tricky, but anybody can do it with practice and some patience.

@JohnDoe-mp1zk 6 жыл бұрын

Davysprocket213 so how did they come out.

@sameersharma709 3 жыл бұрын

Great job and looks good. Very nicely filmed, and obviously kudos to the producer - your son!! Quick questions - how long did it take and approx what was the cost? Thanks for sharing.

@Hubbmade 3 жыл бұрын

Depending on skill level plan for 2-4 days work. We went to a discount (imperfect) building store, so the plywood was cheaper. If I remember right it was 6-7 sheets of 1/2 plywood and a bunch of 2x4s. total was roughly $350-400. not including hardware and screws. Prices have gone up a bit in the last several years so I’d budget at least $500-600 now. Hope that helps, and thanks for watching!

@ronlleeellyn6224 4 жыл бұрын

I like the cabinets. The fronts/doors look amazing. But PLEASE, PLEASE, PLEASE.....LOWER THAT TABLE SAW BLADE. It only needs to be just above the top surface of the material you are cutting, say (1/4" - 1/2"). good job on that project.

@13polarBearzzz Жыл бұрын

Excellent! No safety googles when using the mitre saw 😮

@jonathanchuang3119 4 жыл бұрын

Seriously great video! May I ask what type of ply and hinges you used for your doors? Is that 3/4” ply?

@Hubbmade 4 жыл бұрын

Thanks! It is prefinished half inch maple plywood. You can find the hinges in the video description

@Claysvids 5 жыл бұрын

Any issues with the plywood warping? Was it successful in keeping the dust out? My wife complains about the same thing but I'm wondering if I would have to put a weatherstripping around the door to truly keep everything dust free.

@Hubbmade 5 жыл бұрын

No problem with warping. A little bit of dust still gets in though so some weatherstripping around the edges it’s a good idea!