Logical Window illambazar a sob poya jabe tho

Yes Bro...

Excellent brother

Can we do with a battery ? If so how

Food

the idea is very good but if someone accidently put hand in water and wire is contact with water he or she got shock . can make it shock proof

No problem.

@@LogicalWindow karant to nhi aayega nul me se....????

No

.

Hello sir आप लोग अलार्म की जगह सीधा मोटर को ही off करना चाहते हैं तो मेरे channel #VikasMobileTech पर एक video है उसे देखें , No tention हो जाओगे ये मेरा दावा है, और यदि कोई प्रॉब्लम हो तो मुझे comment में बताना मैं आपको whatsapp के थ्रो बताऊंगा Ok

Bulb bina rasistanc ke fuse ho jayega

सही पकड़े

isse current ka koi issue toh nahi hoga na?

No

@@LogicalWindow kitna volt current two pin plug me pani me jata hai

It's 5 V DC current.

@@LogicalWindowkya isme 2 speaker laga sakte hain

Bhai Pani me current nhi aayega yese me??

No

@@himanshu-nh8wz nahi aata bhai ye safe hai

Hello Sir, यदि आप चाहते हो कि टंकी फुल होने पर मोटर automatic off हो जाये आपको बंद भी न करनी पड़े तो आप मेरे चैनल #VikasMobileTech पर जाये और इस की video देखें मैं 100% गारण्टी के साथ कह रहा हूँ आपको इसके बारे में कोई नहीं बताएगा । यदि आपको ये system बनाना है तो मैं बनाऊँगा। यदि मेरे ऊपर भरोसा हो तो मेरे चैनल को सब्सक्राइब करके मुझे भी आगे बढ़ने का मौका दे और मेरी सभी वीडियो जरूर देख यदि आपको बनाना हो तो मुझे reply कर देना आपको whatsapp नंबर send कर दूँगा,

Bhai charger chalu tha kya

Water ki count millions m hoti h, aaj pta chala🤣

Hello Sir, यदि आप चाहते हो कि टंकी फुल होने पर मोटर automatic off हो जाये आपको बंद भी न करनी पड़े तो आप मेरे चैनल #VikasMobileTech पर जाये और इस की video देखें मैं 100% गारण्टी के साथ कह रहा हूँ आपको इसके बारे में कोई नहीं बताएगा । यदि आपको ये system बनाना है तो मैं बनाऊँगा। यदि मेरे ऊपर भरोसा हो तो मेरे चैनल को सब्सक्राइब करके मुझे भी आगे बढ़ने का मौका दे और मेरी सभी वीडियो जरूर देखें

@SHADOW # GAMING sach me?

Its dc current i think.

Idiot it is sc current

@@manjunathb370 the cell phone charger ic converts the ac to dc. nothing to be afraid of.

@@subhambanerjee2994 A limit switch can be used for closing the buzzer circuit. It can be easily attached with a float. Then we can avoid the contact with water completely. The system become 100% safe.

@@SaiKumar-wk4mk yeah that would make the ckt more safe..👍

kzfaq.info/get/bejne/rbCeocR_xtS2f4E.html

Nehi.

hi sir, I have Robo India PBUZZ5 Pizo Buzzer bought from REES52.When I short two pin , it buzz.But doesn't buzz in water.

Right

donho cable pani main dubte hai to shock ka to khatra nahi

I already put my finger in water tank and explained it in New video. Watch the new video.

But problem of current when adaptor will burn?

Indicator led not working. Mostly a resistance should be adopted before bulb. Pl clarify. Other things OK.

I have a Sinicon Automatic water level n pump control system but I don't know anyone who will com hom n fix for me. I live in Hosur. Water tank on 2nd floor terrace.

Waise current marega tumhe tb pta chlega

No problem.

@@LogicalWindow bro Mi ya samsung charger se hoga kya

Ha, hoga.

@@LogicalWindow but Samsung or mi charger to khulte nehi to bina khole hi karna padega

Really, I would like to try

Right

And the othe simple way is ... just buy wireless calling bell and put the swith at the tank and bell wherever u can place .. it will comes with atleast 10 mtrs range

But in that case we need to charge battery time and again

Bro if i use 9v battry its not working bro...please give circuit diagaram

See my practical kzfaq.info/get/bejne/o5ihh891yrnMYGg.html

Isme bhi diagram chahiye Wah bhai

Direct connect it with motor.

Vlot ..220 thaana...ellamea aalaram ella

Bro adhi nv a charge Ni use chesav bro

Dont try this it socks you.

Interface quit qrrzyffedgdvtrffq

Kjhteddfdr

Wrong. This only 4.5 volt dc current

T

kzfaq.info/get/bejne/rbCeocR_xtS2f4E.html

😂

Hlo

Really?

Abhi try krna....!!

Priya lockdown m ungli maar rhi ho ki nhi

Plz careful if your using charger adapter that 2 pin only , there is no earthing, leakage current will flow through water. Take care

You mean Mobile charger with 2 pin is also dangerous?

Contact for automatic and semi automatic pump controller m.no 9028328803

Which battery

@@shashikantarout9232 tv remote battery

Unless you don't add salt in water the buzzer won't works

@@sanjevpradhan1870 no, it will work but you need to put two wire closely

Yeah, i kept it too close but still not worked. Just tried once

Sir if u hv water level alarm diy project reply with link.

Shinu Varghese Superb....would u confirm what all items needed and how to do it?

Shinu Varghese excellent

that's right! if the water is low the water pump start without pressing start and stop using a relay and relay coil has low consume power you can use indicator lamp instead buzzer because buzzer can disturb other people

I made this circuit in my teenage (that days we never got appreciation only scolding) ,as an electronic hobbyist (30 years back) .I can explain the circuit briefly, an npn transistor (BC 547) connect it's emitter to negative of power supply ,base to a 10k (try 4.7k, 2.2k,1 k according to mineral ion content in water) resistor other end of resistor connect to tanks overflow level sensor by wire (finolex telephone wire, 2 pair or same) .Bottom level connect to positive of power supply by wire (pair of tele wire) ,collector of transistor connect to negative of 12v DC buzzer , it's positive is connect to positive of power supply.Tank level sensor made by a 20mm pvc pipe with a height of tank , two turn of tin (it will resist corrosion) coated bare copper wire (use the same Tele wire after removing the insulation) over the pipe for bottom level sensor and upper level sensor ,the wires from circuit connect to this .Use 6 0 6 500ma (or 0 /12) transformer, bridge rectifier and a 1000mfd capacitor as filter for power supply.Use three or for transistor(same circuit), replace buzzer with LED and 470 ohm resistor for showing different tank levels if you needed . When water reaches the upper level the transistor forward biased it conduct, buzzer will sound you can off the pump manually.Control the pump with relay use a BC 188(PNP) transistor (or SK 100 according to relay) it's base to collector of BC 547 ,emitter to positive ,collector to negative through a 9 v relay-dpdt - (use a 1N 4001 diode across the relay coil in reverse biase for transistor's protection) connect the emitter of 547 to negative biase to a 220k (try 1M,330k,470k)to positive also the base (BC 547)to upper level sensor of tank bottom level sensor to negative in this case through a low value 1k to 470ohm resistor .Relay's one set pole (N/O and common)for pump's phase control,next pole(N/O and common) to control transformer of power supply ,this same (N/O and common) point connect a 1 A push to on switch for start the pump. Press the push switch relay will activate the pump and power supply through relay, when water will touch the upper level sensor low resistance of water will reverse biase (please try 1M ,470k 330k instead the place of 220k to keep the forward biasing at a certain point) the BC 547 the relay denergised,also the power supply.The transformer,diode capacitor and resistors will protect you from any lethal voltage from water also you can add a glass fuse for power supply.E&O Expected.

Supper anna nice thanks .👌👌👌💐

Thanks 😊

@@LogicalWindow www

I didn't understood a word of you 🤭 what's a relay?

Sunil Gupta You can see relay 12volt on google images And it work its a simple switch witch is operate on various volt

@@SunilGupta-be1kc I have designed a circuit for autocut motor. give me your email and I will send it to you. easy to design and install.

@@GamingSinghNation rohit1995gahlot@gmail.com Bro can send me also

@@GamingSinghNation Can u send it to me Please. its yadavvipinmathura@gmail.com

How to ? Any video please

No

@@LogicalWindow The current will go through the water .... in that case there is a possibility of danger

Only 6/9 volt DC pass through tank water.

It's 5 V DC current. No problem

Bro so only charger is used it acts as rectifies the current and less the current and voltage passing so no worry bro

@@ilanthendralramesh4543 I don't think so assuming charger is of 1A and electricity is of 220V AC then 1A current is quite sufficient to book your hospital bed.

It's 5 V DC current. Have you ever got shocked from mobile charger?

@@LogicalWindow wow wow super bro ,

@@LogicalWindow yes bro I think u don't believe twice I got shocked from charger.......that's Iam telling.....not a huge shock it effects on my hand for 2 minutes