HOW TO MAKE WOODEN LAP SIDING - on a Woodmizer LT15 Sawmill with a Homemade Jig

No video

HOW TO MAKE WOODEN LAP SIDING - on a Woodmizer LT15 Sawmill with a Homemade Jig

Рет қаралды 32,744

Жыл бұрын

In this video I’m gonna show you how to make Lap siding (aka) Clapboard siding using nothing more than a simple 5/8 wood shim. I’ll be doing this on the Woodmizer LT15. No special Jigs needed to achieve the same quality of cuts.
Make it a Great Day!
Tools/Equipment Related to this Video:
Bobcat S250 skid steer
Eastonmade 12-22 wood splitter
Blockbuster firewood tumbler
Woodmizer LT15 Sawmill
Stihl MS661chainsaw
Thank you so much for your support!
My wife and I are full time homesteaders in the Appalachian Mountains of south-central Pennsylvania. The Make Some Dust channel is dedicated to more details on the sawmill, firewood, and wood shop operations at our homestead. Thank you so much for joining the channel. I hope to bring some of what I’ve learned over the years to the community. I am hoping to learn some new skills, too. Life is a journey. Here’s to the future! -Chuck
--
LINKS:
Our website is: www.makesomedust.com
(This link might be linking to our homestead’s homepage as we work on the Make Some Dust site. Please be patient. My wife and I are the only ones running the channel).
Our social media links:
Twitter: / make_some_dust
Other information:
Make Some Dust
16477 Sharman Lane
James Creek, PA 16657
814-505-6426
#makesomedust #woodworking #bandsaw #siding #jig #joiner #wood #firewood #woodshop #diy #woodmizer #eastonmade 12-22
Disclaimer: Make Some Dust videos are for entertainment purposes only. When using any tools, machinery, finishes, and fluids always read and understand the safety and manufacturers guidelines.

Пікірлер: 34

@rogerdenney3663 11 ай бұрын

I KNEW it could be this easy. Even if the cant wants to tilt, just add another 'shim' for balance. Take your time, and it's easy peasy. Thank You for sharing!

@make-somedust 11 ай бұрын

Your welcome, yup easy peasy, save hundreds of dollars in the process. Have fun with it.

@rogerdenney3663 5 ай бұрын

@@make-somedust Mill ordered and should ship in a few weeks. Yay. Watching this again to re-learn, and realized you have a drum firewood cleaner in the background! Used the money saved on your shim to spend on that!! Awesome! My wife would be scrambling around with a bucket trying to re-coup the scraps underneath! LOL!

@hddoug72 4 ай бұрын

You showing this simple and effective way to make lap siding is what we need more of. I think unless your trying to match an existing siding... a sharp blade would work fine. A few blade swirl marks just gives it a little character. And i gave you a little love.😂

@make-somedust 4 ай бұрын

Thanks for watching, I don’t have many tricks up my sleeve but those I do have I’ll share.

@user-ue8lw3fq1x 5 ай бұрын

I very impressed how you did that I will definitely remember that good job

@make-somedust 5 ай бұрын

Glad you liked it, thanks for stopping by

@ryanwindham2997 9 ай бұрын

Incredible. So simple yet so useful

@neomatrix2722 8 ай бұрын

Hay, I think you can make shingles this way too with that taper that's excellent good work

@make-somedust 8 ай бұрын

100% correct just take a bit longer with short pieces. Thanks for watching, don’t forget to subscribe.

@mchurch3905 8 ай бұрын

I used VG redwood siding when I built my house in 1983. Woodpeckers have caused me to try to find some more of that very rare and expensive siding. At the price I’d have to pay, driving my truck to coastal CA from Oregon to a mill, and buy it, I’d almost be even to buy a mill, buy a redwood log, and using your shim technique, make the beveled siding myself….

@make-somedust 8 ай бұрын

And at the end of the day, you have a mill to make other lumber or sell it for more than the purchase price. Good luck thanks for watching.

@jimon1287 8 ай бұрын

Just came across this video. Very simple and helpful for use on my sawmill. Thanks.

@make-somedust 8 ай бұрын

Glad it was helpful!

@TStheDeplorable 10 ай бұрын

If you want, WoodMizer will paint that shim orange and sell it to you for $2400.

@TheOldManAndTheSaw 9 ай бұрын

BAD idea. The turn-around for the paint job is 25 weeks.

@lugtugsawmill4725 11 ай бұрын

Hey Chuck. I've been doing this since 2015. The last time I did it I glued my square piece to 1" strip so the jig would rest on three bunks. The pines and some softer hard wood often leave feathers even with a new blade. Brent

@make-somedust 11 ай бұрын

Thanks for confirming it’s not the blade. I’ve notice some wood cuts real clean others leave that feather.

@richardjacques6370 8 ай бұрын

Great information. Thank you

@MASI_forging Жыл бұрын

Very nice mate.😃😃

@make-somedust 11 ай бұрын

Thank you

@uglyapple 8 ай бұрын

I've been planning on doing just this for some siding I need, good to see it works. And, I too find the fraying/feathering happens with sharp and dull blades alike, unpredictably from log to log. I think it's more a factor of how the log grows and the constitution of the wood fibres that result from individual growing conditions. I checked out your other videos and you've got yourself a new subscriber. Maybe you might find something of interest on my channel, or not. Either way thanks in advance for checking it out if you decide to and keep the videos coming.

@make-somedust 8 ай бұрын

Appreciate you coming aboard. Thanks.

@DoubleplusUngoodthinkful 3 күн бұрын

Do you have another video on how to get a Woodmizer LT15 on the cheap?

@make-somedust 3 күн бұрын

@@DoubleplusUngoodthinkful sure do your homework, keep looking and have cash in hand.

@TheOldManAndTheSaw 9 ай бұрын

VERY simple solution. Do you have any issues with the cant not being clamped?

@make-somedust 9 ай бұрын

At a certain point I find it best to leave several boards in place after the cut to add weight which helps hold the final cuts. Other options would be to start your cut about 2’ then clamp the back end and continue. Then about midway add another clamp, wash rinse repeat

@lindsaythomas2283 9 ай бұрын

Very simple and effective !! Is it easy or difficult to paint rough, (unplained) lap siding ? Does running hand belt sander over the lap siding make it easier to paint ? Cheers from N.E. Ohio

@make-somedust 9 ай бұрын

Straight off the mill a palm sander would be plenty. Good sharp blade is the trick. Pretty easy to paint in my opinion, but I’m not a painter. Lol

@timothylongmore7325 8 ай бұрын

I sticker and let them dry and as your installing hit it with a belt sander. I just hit it once with a medium but you can make them smooth as you want. My siding is 3/4 x 6 no bevel. I could run it through my planer but I don't care for the look. Sharp blade is the best way to start. You will use a lot less paint too.