How to Make Your Drywall Corners Square (on Corner Bead)

No video

How to Make Your Drywall Corners Square (on Corner Bead)

Рет қаралды 120,001

Күн бұрын

You can correspond now by mail
THE DRYWALL DOCTOR P.O. Box 1559 122 N Wheaton Ave. Wheaton IL. 60187
How do I make my corners right on bead? Lets find out. Cutting corners on corner beed is not hard.
Disclaimer: Due to factors beyond the control of The Drywall Doctor, we cannot guarantee against improper use or unauthorized modifications of this information. The Drywall Doctor assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. The Drywall Doctor recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of The Drywall Doctor, no information contained on this KZfaq channel, Facebook page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not The Drywall Doctor
**Like our stuff? Here's small and big ways to show support**
SUBSCRIBE here! bit.ly/2yPbgYK
(We also love comments, "thumbs up" and shares :-)
Join our CROWD FUNDING effort on Patreon
/ thedrywalldoctor
*If you do this right (or even if you do it wrong too), please feel free to share! This is a community so your experiences only make this place a better resource for those who want to do their best drywall work!
Proverbs 22:29 NIV Do you see someone skilled in their work? They will serve before kings; they will not serve before officials of low rank.
Leave a comment below or email us at thedrywallphd@gmail.com THE DRYWALL DOCTOR™

Пікірлер: 52

@richardp3624 3 жыл бұрын

Very impressive, and moreover very clear. The outside corner on the box cannot possibly look better; I'm definitely going to adopt your method.

@joesenchuk2671 5 жыл бұрын

Thanks for taking the time to show us your techniques.Much appreciated.

@rideauviewconstruction717 6 жыл бұрын

Really wish saw this video yesterday when I was corner beading. Will use tip on next job. Excellent videos.

@vadjarogonov6432 6 жыл бұрын

It's educational without any doubt. Thank you for all the videos you're making!

@mikedevine2350 6 жыл бұрын

You should 45 all the ends of the bead, so you have a nice sharp crisp point

@lukeprobst1664 7 ай бұрын

Thanks for posting this. Very helpful for me

@dirtypradabag 6 жыл бұрын

Thank u I been a hand tapper for almost 5 years n I just got into the Machines last summer n I love it n thanks for the tip on those corner beads that's gonna save a lot of time when there lots of 3 ways to do

@waz1167 6 жыл бұрын

Yes it will save time. I used to 45 all the ends where they meet up but now i'll be doing that short cut!

@freefacephoto 4 жыл бұрын

SHORT, SWEET and SPOT ON!

@Kevin-Schmevin 6 жыл бұрын

Really glad I found your videos, so much more entertaining (and informative) than the others I've found.

@TommyTortellini 2 жыл бұрын

This guy works like me, set up in the corner, corner bead in-hand, cutters, camera. Let’s move somewhere else. Drops knife, drops corner bead, headphones in the way. End result however, beautiful.

@jmarco4331 5 жыл бұрын

nice to c there are still some guys that take pride in their trade. Way too many hacks out there today. . .

@anthonycasey6064 5 жыл бұрын

The guy that was teaching me passed on so I'm trying to learn myself

@anthonycasey6064 5 жыл бұрын

All your videos are good I appreciate you taking time to talk explain and show how to do it thank you very much

@emilianorangel8798 2 жыл бұрын

Thank you mister, this will help me a lot

@waz1167 6 жыл бұрын

Thanks for the great tip!

@johnc1280 Ай бұрын

If I have an archway. Rounded door entrance. And I want to square it. What’s best tool to cut into the metal arched shaped corner bead? Sawzall ?

@THEDRYWALLDOCTOR1 Ай бұрын

Sometimes it's easier to remove the bead with a claw hammer 🔨. But a Sawzall cut everything.

@johnc1280 Ай бұрын

@@THEDRYWALLDOCTOR1 thanks boss. Any particular type of blade you recommend on the Sawzall?

@THEDRYWALLDOCTOR1 Ай бұрын

@johnc1280 I always use any all purpose blade so I can cut through anything.

@johnc1280 Ай бұрын

@@THEDRYWALLDOCTOR1 thanks much

@Oneida100 5 жыл бұрын

That video helped me out a lot; thank you.

@Ivan-tw6vj 5 жыл бұрын

Start watching at 2:50 mark....save you some time, thanks for the video

@DiegoLopez-pz1lz 2 жыл бұрын

Thank you Sir. 🙏🏽

@agee7777 6 жыл бұрын

perfect, just what i was looking for thanks

@osteo1able 3 жыл бұрын

Excellent

@VC-Toronto 6 жыл бұрын

Can you demo for an inside corner where 3 surfaces meet?

@danyaguilar1025 6 жыл бұрын

Thanks for your videos doc

@bobjwoods90 4 жыл бұрын

Thank you 😊

@gordongoodkey4118 3 жыл бұрын

That's how ya do it tks man

@Sosa081 5 жыл бұрын

I have round corners, can I place the square ones over them or do I need to chip the round ones off?

@IPeteeeeerr 7 жыл бұрын

Do you put a piece of tape on the joint where the corner beads meet?

@marijuanero1 2 жыл бұрын

Nice & easy

@jasonhoover6320 5 жыл бұрын

Have u every used auqrubead? It's really good bead an easy an fast to install

@kevinc6383 6 жыл бұрын

How is the bead attached? With mud? or do you use spray adhesive, staples, etc. Thank you

@Ivan-tw6vj 5 жыл бұрын

mud

@keithmatson6538 4 жыл бұрын

Would you use the same application with no coat corner bead?

@THEDRYWALLDOCTOR1 4 жыл бұрын

Yes

@projectdad6561 3 жыл бұрын

So wait, if it’s a bit too long just cut it?? ,,,,,ok I’ll try that 🤔

@JFSConstructionKitchener 6 жыл бұрын

Great Video!

@BrentDaughertyMe 4 жыл бұрын

What type of corner bead is that?

@THEDRYWALLDOCTOR1 4 жыл бұрын

It's called USG super wide tape on bead

@quedogkualum 6 жыл бұрын

What store did you get the corner bead from?

@22shroomster 6 жыл бұрын

Any major drywall supply store. Home depot has them too

@abdolreza82 Жыл бұрын

Great video and It will make a nice sharp angle as you said but this will never make your corners "square". I came here to see how you square the corner and got dissappointed :) thanks anyway.

@THEDRYWALLDOCTOR1 Жыл бұрын

Corner bead shouldn't be squaring your corners. The carpenter should. Corner bead will just follow the angles.

@-mejor-que-nostradamus-6152 3 жыл бұрын

People Did Not Learn Anything In This Video, You Must Doing And Not Speaking Too Much.

@irvinwittmeier5208 4 жыл бұрын

!;-)

@RadioMartyT1B 6 жыл бұрын

Paper faced bead is such (expensive) garbage. TrimTex or metal only.

@waz1167 6 жыл бұрын

I would have to say its pretty cheap compared to Trim Tex. Trim Tex would be ranked #1 for quality of product but paper faced would be ranked 2nd. Metal is the quickest to install.