How to make your own

No video

How to make your own

Рет қаралды 10,919

2 жыл бұрын

Check link below if you would like to get this convection kit
www.cryptomininglab.net/produ...
www.overclockingbits.com/prod...
in this video we will be testing a New water cooled conversion kit for the Antminer S19 series from a regular S19 air cooled to a S19 liquid cooled
#immersion #antminers19 #btcmining #overclocking #btc #immersioncooling #liquidcooled #watercooling #btc #cryptomining

Пікірлер: 31

@Leon_crypto Жыл бұрын

Your video is great! Very thorough in what it says. I hope to get in touch with you.

@Crypto_mining_lab Жыл бұрын

Glad it was helpful! and you can always reach out thought our website www.cryptomininglab.net/contact-1

@Crypto_mining_lab 2 жыл бұрын

Check link below if you would like to get this convection kit www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks www.overclockingbits.com/product-page/s19-water-cooled-kit in this video we will be testing a New water cooled conversion kit for the Antminer S19 series from a regular S19 air cooled to a S19 liquid cooled

@af6727 2 жыл бұрын

I've always wanted to know how these work. Thank you! I already have an immersion system setup that could dissipate 6,000W. I might as well use this water block right away. Very much interested actually. Vnish has their own water blocks overclocked to 170T!

@Crypto_mining_lab 2 жыл бұрын

Cooling side is the only down side of this kit , but if you already have a dry cooler , this is a very good option for canceling noise and more hashrate , I’m working in putting together a complete kit including the water cooler ( dry cooler ) as well as the rear cover , stay tuned

@wayneo7220 2 жыл бұрын

Size it for a dry cooler and pump, install Braiins OS+, fire it up and lets see its hashboard numbers and chip temps. I'm curious if the other side of the board with air-cooled sinks would need some air flow? I like the water-cooled heat sink system for running one or two miners because it costs much less than a tank system. The thermal conductivity of dielectric fluid is also just 25% that of water, so you don't need a bigger dry cooler and heat exchanger to compensate for this.

@Crypto_mining_lab 2 жыл бұрын

Will definitely do that , i’m Just waiting for Custom dry cooler , when I said mid size dry cooler , I meant smaller than the one used for immersion cooling , since couple units of s19 wouldn’t require such a sized dry cooler , will post an update after testing it , cheers

@johnjolly6913 2 жыл бұрын

Do the inlet and outlet come out of the miner box enough to 3D print a back cover and have them come through with holes with o-rings? It looks like it from the video but it’s hard to tell without a side view.

@Crypto_mining_lab 2 жыл бұрын

The intel/outlets are not long enough , but I’ve seen another version with longer ones , which should work perfectly

@andrewmartino6144 Жыл бұрын

I feel like you will need a radiator with fans on it to keep the liquid cool.

@Crypto_mining_lab Жыл бұрын

Yes and that’s what I did , check the channel us more videos update on the dry cooler for that unit

@haleem-5826 Жыл бұрын

Thank you for the video. What's the water flow rate?

@Crypto_mining_lab Жыл бұрын

the pump i used is 350W with 40L/M max fl;ow

@sbomaggz Жыл бұрын

Thanks, been wondering where to get these

@Crypto_mining_lab Жыл бұрын

available here as a full kit including dry cooler , or just water cooled plates www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks

@aaronsandefur1716 2 жыл бұрын

I want to buy this system but don’t know how to safely remove the heat sinks on the S19. You skipped right over this in the video. Do you have any videos of this?

@Crypto_mining_lab 2 жыл бұрын

from 6:42 to 6:52 you can see the whole processing of removing the heat sink , nothing complicated , just go easy when you try to pull of the original heatsink out of the board

@af6727 2 жыл бұрын

Would you throw a link for thermal paste you used?

@Crypto_mining_lab 2 жыл бұрын

I’ve bought the thermal paste from a shop , but any thermal past with 3.5 to 4 W heat dissipation will work perfectly on the S19

@aligamar2750 2 жыл бұрын

we need part 2 please 🥺🙏🏼

@Crypto_mining_lab 2 жыл бұрын

Will do , as soon as our the whole thing together with a cooler

@richardjonesmedia 3 ай бұрын

Hi. Can I ask you some questions about these parts ?

@Crypto_mining_lab 3 ай бұрын

Sure you can reach me out through our website , the link is in the video description

@rahu.thakur 5 ай бұрын

Could you suggest miner.i have electricity fr.... what Miner i buy.i want money big amount per month.

@Crypto_mining_lab 5 ай бұрын

well depends on your budget , profitable miners are more expensive , so if you have free electricity doesn't make it free to mine since you need to purchase the miners first , cheap miners make less profit , and profitable miners cost more money so its up to you to choose which way you want go

@SPACEDESIGNWAREHOUSE 2 жыл бұрын

Did you get temps?

@Crypto_mining_lab 2 жыл бұрын

check this short update video , got a small dry cooler connected to it , and temps where under 70 kzfaq.info/get/bejne/atF2mdqn1tayoaM.html

@maybelive765 9 ай бұрын

Hello, can the kit also work for S19J?

@Crypto_mining_lab 9 ай бұрын

Yes it can be used for the S19J , we just need to know the exact model !

@aligamar2750 2 жыл бұрын

where we can order these leave a Link please

@Crypto_mining_lab 2 жыл бұрын

There is a link in the videos description www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks Or www.overclockingbits.com/product-page/s19-water-cooled-kit