Having fished multiple s in different sizes and colors, kzfaq.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 this is by far my favorite. One thing to be aware of is the sided willow blade. One side is silver and the other is the green/orange shown. This is not bad, just unconventional. In terms of fishing, I have found the lure works just fine without a tail like a craw or shad. That addition is up to you. Also, the hook part where you attach the swivel snap or tie the line is a problem on baits these days, since it's able to slide up and down. However this lure seems to be tight enough that that doesn't happen often, and you can solve it by putting a thin slice of medical tube over the hook before attaching the line. Like others have said, it's really magic on a good windy day.

I’ve been watching these videos to see different styles because I want to make my own single hook inline spinners cause there’s really no big market for that. I want to make ultra light inline spinners 1/8 and 1/16 oz. This is hands down the most informative tutorial yet, thank you for taking the time to make this video.

Great video! You explained everything in great detail and make it look so easy. Would definitely be interested in seeing more videos like this. I think you have insured me to try to make my own. Thank you!

Loved the tutorial. I am thinking about trying to make my own spinners for trout so I have been watching tutorial after tutorial gleaning info from all of them. I am hoping I will be more successful at trout fishing when I make my own lures rather than depending on spending $$$ on spinners that I end up losing (I am pretty awful at catching trout, much better with bass). I wil be watching more of your videos now that I have subscribed.

Thank You for a video on spinner making start to finish! I carve my own baits but ive never made a spinner. Thank you for all the info!

Grate job on the video and lures. I enjoyed the double angle on the video, not many people do that. Also quite informative about the builds. Just wanted to give a thanks out to you. And keep up the good work.

Awesome video, very informative. This is one of the best how to videos I've seen. Please keep them coming. Stay safe and tight lines.

Was looking through my shed for something to make spinners out of. Had lots of copper but brass would be better, and it seemed I only had brass like old valves and such. Then I peeked behind a shelf and low and behold found the perfect thing. A kick plate one foot by 32 inches long and the perfect thickness. Came from an old school door I scavenged twelve years ago. It's old, and solid brass, not like the newer ones that are painted brass.Now to mark and dremel it up into pieces.

Great video !!! I swear by Spinners best lure...!!!

Awesome video, thank you. Very well laid out. Bought a twistech years ago to make salmon spinners. It’s been buried in the garage. Dug it out recently to make some trout spinners. The insert you made looks great. The stock loops are a bit large for my taste. I try to crimp down the tag end with pliers to help keep from getting hang ups. Still using bearings. Sometimes I’ll use a smaller glass bead instead of brass for the bearing. Good stuff, keep it up.

Exactly the information i was looking for, Thanks a bunch.

Great video. I'm typically a fly fisher; however, I have spinning gear as well. Always have tied my own flies, but plan to start making my own spinners and wooden crankbaits soon.

Great vid cods! The colorblind comment had me rollin’ 😂

Spinners looked great 👍 I just subbed.

Great demonstration. Thanks

Hi from UK, great vid I make my own spinners for trout and salmon been trying to buy a twistec wire former but the standard is out of stock, great channel tight lines.

Great video, Thank you!

Good tutorial!

I make jewelry just started ,my son says I need to make fishing lures, they do make a looper which is new to the market, but might be harder on the hands. I might do research on this wire former. Thanks and keep on fishing. Kirsten D Mitchells Bay Ont Canada

Ty.... helped me so much 👍👍👍

Well made video.

Excellent ✌️😎💨

thank you share sir

Topdlinha, me manda umas 2s dessas pra mim 👏👏👏👏👍

Nice, 👍

Very cool bro! I'm thinking to make my own lurse too 😃

I been making my inline spinners all the time i would recomend to your follower to use clevis no matter what blade they use @43 degrees outdoor

Nice vid

What sizes do you use for the hollow and the full tungsten beads?

amazing the fast time to do.. hey guy... where I can purchase this tool (Amazon, ebay, Aliexpress..) to do spinnerbaits ? thank you

Hello the great video ,I have question, where did you buy the lure conversion machine and the rest of the parts all? Thank you , im from Bulgaria.

Man this was an awesome video. I bought some spinners and a couple wont spin up for some reason. What could be the problem?

What would be the weight of the spinnerbait bodies for the different blade sizes? Good video. Thank you. Greetings from Lima Peru.

I didn't read all the comments. Someone may have already suggested you can smooth the tag ends with a Dremal tool.

Could you please leave the links of were you got the stuff from please?

What size hooks do you use depending on the weight of body or lure?

what size wire diameter are you using. i want to make some small No.10 size hook spinners.

More spinners

Where is your wire bender available? Thanks

How do you make the skirted hooks?

do you want the blade to be the length to cover beads?

Where do you buy your tungsten bodies?

Great video. Do you sell that tool?

Hello Sir, I am a Man of 80 years please send me a note about those treble hooks the make I did not get I know it is very impotent the MAKE of hooks and just so you know this video is wonderful thanks very much.

Whats the best website to find 1/16th inline blades i cant find anything

What is the name of the tool used to twist the wire.

Where do you get your wire from?

Would you be willing to share your 3d printer file? I don't have a printer but I think I could get it printed somewhere.

What mm is the glass beads

Yes, it's me again just want you to know that no matter how hard I try to catch trout just have no luck I'm asking please help me if you would, again thanks.PS I use a spincast reel with six lb. line.

what size clevis

No chero mucio palavra trabaco

Could you tell me where you got the tool for making the twist in the wire.

muito amador, acabamento razoavel