No video
How to Make your own Stranger Helmet
Рет қаралды 4,898
Күн бұрынIn this video, I walk you through how I brought the Star Wars Acolyte Stranger helmet to life. I wanted to bring you all the behind the scenes of this build. This helmet is one of the easiest builds you can do. Thanks for watching, everyone! I appreciate your support and hope you enjoy the video. Follow along and build on!
If you want to help support the channel check out my all the new merch I just dropped.
millenniumwork...
Follow me on
Instagram @millenniumworkshop
TikTok @Millenniumworkshop
If you're looking for a great file for this build Check out Pew Pew Crafts. The file used in this video was from Pew Pew Crafts Patreon
Esty shop link. surl.li/wdafbf
Another great file
Mystery makers www.etsy.com/s...
@mrluisr 4 сағат бұрын
I've watched a many Stranger Helmet builds and you have the best looking one by far.
@Dripvoidz11. 6 күн бұрын
This dude is so underrated he deserves more subs
@Millenniumworkshop 6 күн бұрын
Thank you so much that really means a lot to me!!!! I have a new video coming out Friday on how to make a light saber I hope you like it!!!!
@Alexlemay17200 Ай бұрын
Bro answered EVERY question I had about making this helmet!!🔥🔥
@Millenniumworkshop Ай бұрын
Thank you so much! I tried really hard to make this video easy for everyone!!! I’m glad it helps!!!
@Alexlemay17200 Ай бұрын
@@Millenniumworkshop do you recommend that specific truck bed coating that you used or do you think any truck bed coating is fine?
@CHADPRIEST347 16 күн бұрын
Killer video!! Straight to the point, and a lot of great information to help build about anything. 💪
@Millenniumworkshop 16 күн бұрын
Thank you so much bro means alot
@starwarssith66 Ай бұрын
Just finished its crazyyyy hot much work goes into making something like this! I do not have the patience for it😂
@Millenniumworkshop Ай бұрын
It’s a lot of work! Thank you so much for watching
@TheBrodalorian Ай бұрын
I like how you lightly did the graphite powder, that’s smart.
@Millenniumworkshop Ай бұрын
Thank you so much.
@BSMNTLabs Ай бұрын
LOVE the weathering details on this build! Gave me some ideas for my saber projects! Thank you so much for sharing!
@Millenniumworkshop Ай бұрын
You are so welcome! Good luck on your saber project
@rebelsreptilesandgames Ай бұрын
That was a Fantastic video. Great Job . Thank you for sharing with us how you accomplished such an awesome Helmet Time lapse was also very cool. ⚡️😎
@Millenniumworkshop Ай бұрын
Thank you so much Ed you’re always the best!!!!!
@joe3019772008 Ай бұрын
great build video, bro. super cool seeing it all come together. #ROADTO600
@Millenniumworkshop Ай бұрын
Thank you so much! It was a blast to make!!!
@HyperdriveStarWars Ай бұрын
Insane work! Love how it came out Rex!
@Millenniumworkshop Ай бұрын
Thank you so much! I’m so grateful to have your support
@zombiehunter1152 Ай бұрын
Looks amazing rex
@Millenniumworkshop Ай бұрын
Thank you zombie! You the man!!!!
@zombiehunter1152 Ай бұрын
@@Millenniumworkshop np bro 👍
@jedi_lex Ай бұрын
Amazing video! Super informational!!
@Millenniumworkshop Ай бұрын
Thank you so much! Really means a lot to me
@MAZI_250 Ай бұрын
Can i buy it?🎉
@StevenMogaFilms Ай бұрын
This came out amazing 💥 i love the truck bed liner step how you just have fun with it, overall 10/10 video hope to see more in the future Rex!
@Millenniumworkshop Ай бұрын
Thank you so much! Really means a lot!!!
@Dripvoidz11. 6 күн бұрын
You just gained a sub
@Millenniumworkshop 6 күн бұрын
Thank you so much again!!!!
@LivingLambeaux Ай бұрын
Looks great dude! I'm getting ready to start painting and weathering mine
@Millenniumworkshop Ай бұрын
I hope I can see your final! Make sure to send it to me on instagram! I would love to see it! Have fun with it
@LivingLambeaux Ай бұрын
@@Millenniumworkshop to my surprise I already followed you on Instagram! Lol I’m looking forward to all the weathering!
@jedirogar Ай бұрын
Nice!! I’ll be using a bit of airbrush on my build w a few different paints but really great turnout on yours man🤘🏾 Also great to see it fit in the bambu as that’s what I’ll be printing with as well!
@CollectingHavok Ай бұрын
pretty good overview of the process!
@Millenniumworkshop Ай бұрын
@@CollectingHavok thank you so much!
@Gobi_Ness 29 күн бұрын
I wonder if I you can turn the stranger helmet into a welding mask.
@Millenniumworkshop 29 күн бұрын
I use a Hobart face shield as the visor! But I would not recommend using it actually for welding lol
@Jawa_Sw_Collector Ай бұрын
So hyped for mine bro! Amazing work! 🔥
@Millenniumworkshop Ай бұрын
Thank you I can’t wait for you to see it in person
@StarWarsBaby75 Ай бұрын
awesome video pretty kool to see how it was done !!!! i am super excited for my helmet !!!!
@Millenniumworkshop Ай бұрын
Thank you so much
@Jack-mm2be Ай бұрын
thats amazing.. hes my new favourite character for sure, will you be selling these or will hasbro be making them ?
@Millenniumworkshop Ай бұрын
Thank you so much!!I do commissions yes I got a pretty long list right now of bills that I’m doing for people, but you can always message me on Instagram to get on the waitlist
@Harriascreed9664 3 күн бұрын
Hey, I have a few questions for you if that's okay. What file did you use, what infill density did you use, what size did you have that at, did you have a trick to not use as many supports. Also these next questions you dont need to answer but only if you can but if you can tell what infill pattern, layer height etc and how exactly you measured it. That would be amazing. Also you have earned yourself a fellow subscriber now😊
@Millenniumworkshop 3 күн бұрын
Thank you so much for watching it truly means a lot! The file I linked in the description it’s by PewPewCrafts, the link will take you to his Etsy to his shop or you can look him up on patron as well. He is a great dude for sure. Infill density 15%. Layer hight .12 -.16. Supports tree slim with 25percent threshold angle. Infill pattern some was printed with grid and some with gyroid! Parts I wanted stronger then others I went with gyroid! The entire build was printed at 99 percent scale on his new updated file his first file I had to print it at 85 percent so the new updated v2 is almost perfect sized for someone with a 24in head 99 hits it on the money with perfect amount of room for padding and lining. I also made a video for that and how to make the strangers gauntlet! And today his light saber! Again thank you so much if you have more question hit me up on instagram…. Have a great day and again thank you for following! Welcome to the Workshop
@HuntressDiana Ай бұрын
Great video ❤👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@Millenniumworkshop Ай бұрын
Your support is always amazing thank you!
@RyanByrne999 Ай бұрын
Htf does this dude only have 616 subscribers?
@Millenniumworkshop Ай бұрын
I’m at 618 now! Hahaha thanks so much!!!
@Kal-ebdumenull Ай бұрын
I'll make a metal One, One day
@Millenniumworkshop Ай бұрын
I would love to see that
@Kal-ebdumenull Ай бұрын
@@Millenniumworkshop When I do I'll give you a shout
@benzeno187 Ай бұрын
Good work man!!
@Millenniumworkshop Ай бұрын
Thank you so much!!! Means a lot!! I put alot into this video!!!
@CantinaTalkSW Ай бұрын
Let’s gooo
@Millenniumworkshop Ай бұрын
Thank you so much!
@popthebountycollector Ай бұрын
Amazing work bro 💪🏽💪🏽💪🏽
@Millenniumworkshop Ай бұрын
Thank you so much
@Jaded_Mara Ай бұрын
awesome build, turned out great! was wondering what printer you use? i can tell it’s bambu lab but i want to know which model :)
@Millenniumworkshop Ай бұрын
I used the p1s it’s a great printer!
@GreedoShot_2nd Ай бұрын
awesome video! what kind of clear coat did you use?
@Millenniumworkshop Ай бұрын
Thank you so much! I just used a matte clear rust oleum
@alastair8601 21 күн бұрын
I wish I had a 3d printer to do this, I have to figure out how to do this with cardboard and foam but 3d print looks so much better :((
@Millenniumworkshop 21 күн бұрын
3d printing is much easier! But I will have to say making something like this out of cardboard or foam is an amazing skill! I would love to see the progress of that! Message me on instagram so I can see it as you build it!
@alastair8601 21 күн бұрын
@Millenniumworkshop will do, I need to get some materials first, but I'll try my best to make it look as good as yours
@samanmaycry 29 күн бұрын
I was wondering if you were able to suggest an equivalent to the Satin Dark Walnut, I live in Australia and unfortunately the range of Rustoleum paints are quite limited and this paint is not available anywhere. Is there any kind of Montana Gold paint you would say that would achieve a similar colour to the Dark Walnut or something like the Rustoleum Satin Espresso? Thank you very much to replying to all our comments and questions! Keep it up and you'll be at 1,000+ subs and beyond in no time!
@Millenniumworkshop 28 күн бұрын
Thank you so much! I would try Montana shock dark brown, or Montana ebony brown. The goal for me was a black brown the darker the better but not just black! Good luck hit me up on instagram so I can see your finished helmet
@samanmaycry 28 күн бұрын
@@Millenniumworkshop Thanks for that! Gave you a follow!
@samanmaycry Ай бұрын
Absolutely amazing tutorial! Definitely following this guide! I just had a few questions regarding the Clear Coat? Between which steps are you applying the Clear Coat? Are you doing it between each different paint or just after the primer? And is it possible to Clear Coat the Silver Teeth since I know sometimes Clear Coat doesn’t react well with Silver or/and dulls it
@Millenniumworkshop Ай бұрын
I used a matte clear! With these paints you can clear just about anytime! I cleared once I graphite powdered it and at the very end when it was done! I did not clear the teeth!
@Millenniumworkshop Ай бұрын
And thank you so much for your kind words. Don’t forget to check out the how to pad and line the entire of that helmet!
@MauriceMercado Ай бұрын
What 3D Printer do you use now? I don;t see the CR-10
@Millenniumworkshop Ай бұрын
For these helmets I used my Bambu p1s for all parts!
@ryane.3539 Ай бұрын
How is the vision? Would it be possible to troop in one of them or would I be walking into everything?
@Millenniumworkshop Ай бұрын
Honestly, if you get the interior padding right and you get it perfectly aligned on the eye, I can see really well through it. Surprisingly, it’s better than what you would think. Also the file from pew pew craft. I have an updated version where the eyeholes are a little bit bigger now which one of them that I make now will have that, but on the original version, it’s actually not that bad.
@ReluctantHero13 Ай бұрын
Great work and end product blew me away 🫡 I would love to have one. Have you made or consider making the arm-guard too?
@Millenniumworkshop Ай бұрын
I have made the gantlet! @starwarssith got one!
@isaacash6318 Ай бұрын
What was the purpose of the truck bed spray, was it filler, texture, or something else?
@Millenniumworkshop Ай бұрын
I used it to bring a good texture to something that looked dirty and it gave the helmet some age!
@starwarssith66 Ай бұрын
Lets gooooooo!
@Millenniumworkshop Ай бұрын
@@starwarssith66 I’m going!!!! Hahahahah
@starwarssith66 Ай бұрын
Does the 3d printer come with a camera in it or u stuck ur iphone in there??😂😂
@WorkshopOfTheNorth 10 күн бұрын
What if I Swapped out the bed truck liner and put in a "MTN Pro rust effect." (Brown color instead of black) Does it make any difference?
@Millenniumworkshop 10 күн бұрын
I have not tried that combo! If you try it and like it hit me up instagram so I can see it
@WorkshopOfTheNorth 9 күн бұрын
@@Millenniumworkshop alr
@WorkshopOfTheNorth 24 күн бұрын
But I'm curious, is it difficult to see out the helmet once it's done?
@Millenniumworkshop 24 күн бұрын
You can actually see much better than you would think! Also on the new updated files from pewpewcrafts the eyes are a little bigger!
@WorkshopOfTheNorth 24 күн бұрын
@@Millenniumworkshop Thanks for the reply Rex
@mathias3996 Ай бұрын
I wanna print one so bad but I don’t know how to slice and fit them on ender 3 since my baseplate is too small:/
@Millenniumworkshop Ай бұрын
Message me on instagram and we can talk about how to cut it up or I can always print it for you I do diy kits
@mathias3996 Ай бұрын
@@Millenniumworkshop ohhh that’s awesome you do DIY kits. I’m watching a KZfaq video right now on how to cut up pieces. I’ll send you a message on Instagram though. Thank you for replying!
@Alexlemay17200 Ай бұрын
I started out with an Ender 3 too so I know exactly how u feel, about trying to print helmets but having the buildplate be too big. Once you have enough money, try investing in an Elegoo Neptune 3 Plus, the build plate is much bigger and allows u to print helmets in full (depending on how big ur head is)
@WorkshopOfTheNorth 18 күн бұрын
How big is your print area?
@Millenniumworkshop 18 күн бұрын
250x250x250 mm standard Bambu
@Milkanat0r 29 күн бұрын
hopefully you see this!, i downloaded the files and i have everyhting sliced except the teeth, for me they are together and are hard to print, how did you get yours to be in 4 sets?
@Millenniumworkshop 28 күн бұрын
So pewpewcrafts they have a v2 file where the teeth on both sides are printed as one. If you print that straight up and down you should have no issues. When I filmed this video it was the older file so all the teeth were separate! You can still down load the older file and use those teeth if you want I do believe! I hope this helps
@Milkanat0r 28 күн бұрын
@@Millenniumworkshop THANKS!!
@TheAraxis4119 Ай бұрын
Is there a chance to get the blueprints for 3D printer?
@Millenniumworkshop Ай бұрын
The link to it is www.etsy.com/listing/1750373185/
@TheAraxis4119 Ай бұрын
@@Millenniumworkshop thank you
@jack-ryanquinn6187 Ай бұрын
what colour did you use for printing?
@Millenniumworkshop Ай бұрын
Good question black in my personal favorite because when you sand it, it will turn gray and helps you see the problem areas much better
@jeremywitgen585 Ай бұрын
What scale did you end up printing this at?
@Millenniumworkshop Ай бұрын
88 percent scale fits a 24 in head
@jeremyskywalker6478 Ай бұрын
Do you sand the truck bed liner? And did you sand the helmet after you applied the filler before the truck liner
@Millenniumworkshop Ай бұрын
I did not say on the truck bedliner I want to keep that texture. I did slightly send some of the primer the filler primer just to get a smoothie down just a little bit before because I wanted to control the texture with the truck bedliner. Hope that helps.
@blackrockstudios2128 Ай бұрын
You don’t even need the rest of the costume since the character took it all off
@Millenniumworkshop Ай бұрын
Hahahaha I need the costume no one wants to see that lol
@septed3136 Ай бұрын
Hi , ım having some problems while printing the stripes(teeths) can you show me how did you print in slicer?
@Millenniumworkshop Ай бұрын
Message me over on instagram! I would love to help!!
@WorkshopOfTheNorth 20 күн бұрын
You keep using a glue, what is it called`?
@Millenniumworkshop 19 күн бұрын
MITREAPEL CA Glue with Activator you can find it on Amazon! I hope that helps
@WorkshopOfTheNorth 19 күн бұрын
@@Millenniumworkshop Thanks, and how did you get thoes cool effective supports for the helmet?
@MAZI_250 Ай бұрын
Can i buy it from you?
@Millenniumworkshop Ай бұрын
Message me on instagram!
@MAZI_250 Ай бұрын
@@Millenniumworkshop okey😎✌️
@MAZI_250 Ай бұрын
@@Millenniumworkshop done✌️
@NerdAffiliated Ай бұрын
🫏🙇🏾
@Millenniumworkshop Ай бұрын
Thank you so much!
@jserr9682 Ай бұрын
why you waste your amazin talent doing this Garbage Helmet and I say is garbage cause the show is garbage .. You actually did an amazing job making this helmet Amazing work!!
@Millenniumworkshop Ай бұрын
Hahaha thank you so much! I just like to make different stuff and that helmet just was like I saw it and was like yep I need to make that hahahahaha
@starwarssith66 Ай бұрын
Does the 3d printer come with a camera in it or u stuck ur iphone in there??😂😂
@Millenniumworkshop Ай бұрын
@@starwarssith66 yes I the printer has a camera built into to hahahaha
Tristan Maker
Рет қаралды 34 М.
Frankly Built
Рет қаралды 563 М.
I Like To Make Stuff
Рет қаралды 1 МЛН