How To Mantic Twin Disk Clutch Install 03-04 Cobra Terminator

No video

How To Mantic Twin Disk Clutch Install 03-04 Cobra Terminator

Рет қаралды 20,595

Күн бұрын

Mantic Clutch: goo.gl/Q4bFVa
GeoffGerko@ManticClutchUSA.com
Thanks to Nick! Contact him on facebook: / floridaautosurgeons
In this video we installed the Mantic Twin Disk Ceremetalic Clutch for 26 Spline T56 Cobra. This clutch is rated for 1000 HP (about 825RWHP). It is a direct fit for the Cobra without any additional parts to make it work. Part Number M921240
Available in Various configurations
for different HP Levels
and configurations
Now Available Mustang Lifestyle T-Shirts now! mustanglifestyl...
Mustang Lifestyle Decals Now Available! mustanglifestyl...
Like us on Facebook: / mustanglifestyle
Follow us on Instagram: / mustang_lifestyle
Follow us on Twitter: / mustanglifetv
Follow the Team:
Andrew: @MrAjsTech / mrajstech
Ashley: @Ash_Carlton / ash_carlton
TurdZilla: @theturdzilla / theturdzilla

Пікірлер: 156

@AdamSVT 6 жыл бұрын

Nick seems to be 'the man' down there for Mustang work.. maybe you can use the Mantic box to hold your impact wrench for swapping tires at the track.

@smitty_2valve732 6 жыл бұрын

dafobra that's actually a good idea I agree

@AdamSVT 6 жыл бұрын

thank you @Mustang_Boss38 Loving your NewEdge!

@NOSKIDPLATE 6 жыл бұрын

dafobra he would be pulling up in style with that case at the track lol

@smitty_2valve732 6 жыл бұрын

dafobra thanks man, she's a work in progress along with the YT channel I've been down for awhile I need to start recording again

@jpperry4611 6 жыл бұрын

Nick need to be paid with interest he low key saved this channel he came clutch

@camarolife2752 6 жыл бұрын

hey Andrew i just made my account and its not done of course but i just wanted to know that you are the one that made me make it than you. hopefully a few years down the road we can make a video or something. (i can always change my name if you think i copped you)

@asskickingperformance3550 6 жыл бұрын

Tell him I said THANK YOU for showing me that trick for getting that goddamned top bolt out of the starter!!! It ain't very often that somebody gets to show me a trick but I appreciate the hell out of it!! Lol!

@mexjoker8027 6 жыл бұрын

I love how you did everything in one vid! Didn't have us in suspense by splitting the steps.

@easycomeeasygo8901 6 жыл бұрын

Wow you drive that car a lot. My daily driver sees about a thousand to 1200 a month. Driving nice for a thousand miles would drive me nuts. When I had my spec stage 3 plus in my T56. It was Dyno Tuned after install and after the guy finished tuning it I went out and I forward it, lol. And just like that it was broken in it. A wise man once told me, actually the guy who sold me the clutch for my daily driver. That one's got a stage 3 clutch Masters. Well he said where you need to take it easy is the shifting and to take off. No fast or hard shifting and no launching the car for 500 miles. But once you're in gear you can floor it. Now I'm pretty sure this is like asking someone how to break in an engine you're going to get a lot of different answers. But I took his advice in the car is fine.

@MustangLifestyleTV 6 жыл бұрын

A lot of clutches do not need long drawn out break in periods. Exedy, spec, OEM style etc do not need long break in periods. McLeod and magic are different. The material they use have the be broken in otherwise they will drive very rough. You can tell and feel the difference throughout the break in process.

@easycomeeasygo8901 6 жыл бұрын

I will keep that in mind for my RXT. Its not installed yet, im just to busy right now. Unfortunately a rear main seal leaked killed my SPEC 3+, not completely dead. It slips randomly. Thats when i bought the RXT. I will make sure to read tge break in real good. Its my first twin disc. Good luck with that clutch. Lucky for my wallet they dont make Manic clutches for SBFs...... Yet.

@dustinguriel620 6 жыл бұрын

HOLY SHIT man ease up on the Armor All!!

@idontknowatall5214 6 жыл бұрын

Maintain your vehicle and u will save future problems, nice cars that u guys beat the hell out of.

@AwesomeFinish 2 жыл бұрын

That case would make a nice gun case.

@brysonrodden5112 6 жыл бұрын

Thank you for the one video and not breaking it up into 2 or 3 parts

@NOSKIDPLATE 6 жыл бұрын

How about like a little care package I guess you could say like put a shirt,sticker in there then autograph the case? And make a giveaway out of it?

@jeffreygoss5698 6 жыл бұрын

Nick is the man so lucky to have him! Clutch looks great and i was wondering how many break in miles you had to have! And can’t wait for the turdzilla to be back on the road!

@99zman 6 жыл бұрын

Thanks for the awesome VID!! Wish Nick was closer to me, He's a great mechanic..

@manuelguisar6009 6 жыл бұрын

so after 500 mile clutch break in slick tires launch video?

@MustangLifestyleTV 6 жыл бұрын

maybeeee :)

@Wreckedekcoupe 6 жыл бұрын

You better I expect a wheelie...

@mikegay8511 6 жыл бұрын

The Cobra back in business. Next is Ashley's ride then Turdzilla. Can't wait to see that joker come back from the dead.

@NOSKIDPLATE 6 жыл бұрын

The cobra needs some subframe connectors

@kurtschmaldinst3173 6 жыл бұрын

KENNETH _2v yes I have then on my Saleen

@NOSKIDPLATE 6 жыл бұрын

Kurt Schmaldinst I just have the factory ones but I'm getting the maximum motorsports subframe connectors FL

@equalsnegative 6 жыл бұрын

You guys should make license plate covers that day Mustang Lifestyle on them!!

@carstuff4u942 6 жыл бұрын

Great vid! Happy your car will be back on the road!

@kietking6211 6 жыл бұрын

I really want to see turdzilla on the road

@MustangLifestyleTV 6 жыл бұрын

me too!

@kietking6211 6 жыл бұрын

Mustang Lifestyle yeah I'm soo excited

@andrew879ful 6 жыл бұрын

What's the exhaust setup for the turdzilla

@TheLegitAlbanian 6 жыл бұрын

From Chicago, might bring my car to nick for the coyote swap.

@andrewbright628 6 жыл бұрын

Make sure you get a new pilot bearing for Ashley’s car common for coyotes to make noise with the pilot bearing

@jameshowell8748 6 жыл бұрын

Use the case for your cameras and GoPro

@MorbidThrasher666 6 жыл бұрын

Finally!! The cobra is back on your feet er clutch brother,lol

@andrewstevenson5155 6 жыл бұрын

Lol I have to twin disk clutch videos in my subscription box one from you and one from boostedboiz

@MustangLifestyleTV 6 жыл бұрын

I just saw they posted a video. I was about to go watch it. Their mini van is sick

@iamSelfSufficient 6 жыл бұрын

Andrew Stevenson yooo me too! Lol

@Wreckedekcoupe 6 жыл бұрын

I also use 15 extensions to remove starters on new fords

@mustanlab302 6 жыл бұрын

Yes! Another episode of dead battery lifestyle hell yeah

@strokerwatson4770 6 жыл бұрын

looking good keep up the good work

@andrewcbr929 2 жыл бұрын

How’s that clutch holding up? I need to change mine soon and think I’m gonna go with a mantic!!

@MustangLifestyleTV 2 жыл бұрын

It did good. I pulled it out when I traded the car in. I had it rebuilt into a triple and used it in my 2014 GT500 at 1350whp. No issues

@impalalfx1108 6 жыл бұрын

LET HER RIP TATERCHIP! GREAT VIDEO, CAN'T WAIT 2 SEE THE TRACK VIDEO! MAYBE YOU & ASHLEY RACE?

@matthewleising84 6 жыл бұрын

Favorite KZfaq channel lol @MustangLifestyle

@alvindavis3 6 жыл бұрын

Great job bro..

@lovisla 6 жыл бұрын

I would like to see you turn the case into a raspberry PI track computer that you can look all James Bond like getting your case out to do track stuff :P or maybe use it for some sort of Mustang week 2018 give-away.

@jordanwilson9627 6 жыл бұрын

Where and when do you guys have meets?? I live in Polk and would love to come

@tomparry4313 6 жыл бұрын

Fuck bro! Easy on the o2 wires! This is why I do all my own work on my cars.

@ff23018 6 жыл бұрын

Hey Andrew whats the big difference with the Mantic clutch?

@vernondavis2207 2 жыл бұрын

Is it noisy?

@AureliusPaganBlood 6 жыл бұрын

Rims on your Termi,are they CCW's or ? 17 inch?

@leemsadventures1007 6 жыл бұрын

@Mustang Lifestyle what part of Florida ya in? Im in Tampa and going to buy a Termi in the next few weeks, wouldn't mind meeting up and cruising.

@chrisworley2196 4 жыл бұрын

What brand input shaft did you use?

@o.grhino5946 6 жыл бұрын

I like y'all KZfaq channel bro

@dominickirkwood 6 жыл бұрын

I love it very good

@sSkillaz336 4 жыл бұрын

You didn't Need an adjustable pivot stud?

@MustangLifestyleTV 4 жыл бұрын

@GenAfterNextTactics 6 жыл бұрын

I looked up the price of that Mantic with that part number, bro I about had a heart attack.

@loudnorange9689 6 жыл бұрын

You guys should do a clutch giveaway

@snakebiterc2373 6 жыл бұрын

Okay would I be able to apply this process on my 2valve I really don't want to take out my headers I just put them in I gotta do a throw out bearing

@MustangLifestyleTV 6 жыл бұрын

+SnakeBiteRC the 3650 cannot be separated by bell housing

@bradleypfeffer1716 6 жыл бұрын

What's your thoughts on it?

@MustangLifestyleTV 6 жыл бұрын

Fantastic clutch. It works very well for street driving and drag racing. I have no complaints at all

@kurtschmaldinst3173 6 жыл бұрын

I would put foam in it and use it as a handgun case ..... Carry every day !!!!!! .... Do you ?????

@bradleypfeffer1716 6 жыл бұрын

Did you change your throw out bearing retainer sleeve? Thinking about going with Lethal Performance sleeve and wanted to get your thoughts on it....thanks

@MustangLifestyleTV 6 жыл бұрын

I did not

@mustanlab302 6 жыл бұрын

You should do a safety loop on both cars

@MustangLifestyleTV 6 жыл бұрын

That is a good idea

@mgerren88 6 жыл бұрын

HarleyRider 283 is safety loop beneficial on stock driveshaft??? If so, what is the benefit of it

@NickelWhiteS550 6 жыл бұрын

Lol. Slap that like button! Need to slap a cage in it now if you plan on running 9

@ElementL116 6 жыл бұрын

Nice setup. You check the slave cylinder in the S550 yet? For leaks?

@MustangLifestyleTV 6 жыл бұрын

+ElementL116 we have new clutch and slave so it doesn’t matter. It needed a new clutch

@ElementL116 6 жыл бұрын

No doubt with the power you're making. Was just curious if the slave was the culprit. Looking forward to the video.

@chrissmith-mq5go 6 жыл бұрын

Hey Andrew I am looking at the mantic clutch for my mustang gt turbo. What disc did you use? Ceramic or organic and have you noticed any noise from the clutch like rattling or squeaking?

@MustangLifestyleTV 6 жыл бұрын

Ceramic. No noise at all. It’s absolutely perfect

@snakebitegarage2088 6 жыл бұрын

Dope!!

@magdalenomancilla7703 5 жыл бұрын

What brand of clutch cable and adjuster do you have?

@MustangLifestyleTV 5 жыл бұрын

Stock clutch cable. Steeds adjuster

@omarlopez9631 3 жыл бұрын

Did the mantic ever make a chattering noise

@MustangLifestyleTV 3 жыл бұрын

Yup especially on break in

@justinstraub1404 Жыл бұрын

@@MustangLifestyleTVI'm debating on a Mantic over the Centerforce DYAD. Did the chatter go away?

@johnseabass 6 жыл бұрын

@mustang_lifestyle Should of done longtubes with the transmission out 😜 its Sebastian btw lol

@MustangLifestyleTV 6 жыл бұрын

+John Alvarez lol longtubes with kmember upgrade

@bradleypfeffer1716 6 жыл бұрын

Where is the best place to get the Mantic clutch.......thanks

@MustangLifestyleTV 6 жыл бұрын

Contact Geoff and tell him we sent you geoffgerko@manticclutch.com

@bradleypfeffer1716 6 жыл бұрын

Thanks bro!

@soleboy187 6 жыл бұрын

Each car channel knows a guy named Mike, Andy or Nick

@bradleypfeffer1716 5 жыл бұрын

Do you have a discount code for Mantic clutches?

@MustangLifestyleTV 5 жыл бұрын

call and ask for Geoff and tell him ML sent you. He will work on it for you.

@bradleypfeffer1716 5 жыл бұрын

Good deal! Thanks bro

@georgeplays3130 6 жыл бұрын

Thinking of making a KZfaq channel on my 99 camaro build but I have no idea what to do. (I’m also in deland)

@MustangLifestyleTV 6 жыл бұрын

You definitely should man!

@TheBullockFamily 6 жыл бұрын

Go for it

@georgeplays3130 6 жыл бұрын

Mustang Lifestyle I just don’t know what to do. Or what to name the channel. Thanks for encouragement todo it

@TheBullockFamily 6 жыл бұрын

George Plays honestly I wouldn’t worry to much about the little things just start making videos and posting them. That’s the hard part after you get a few videos under your belt you can start to figuring out the names etc. editing videos is the most time consuming part of YT and as you lead to edit you’ll get batter at filming etc.. biggest things is to just get started. Like Nike says “Just Do It” 👍

@georgeplays3130 6 жыл бұрын

The Bullock Family Stories thanks I went for it I made a different Account though I’m going to make it official tomorrow. But thank you for the engagement

@bryanhallman8183 6 жыл бұрын

So, how will the 26-spline input shaft be able to mate up with the crankshaft designed for the 10?

@thetruth45ful 6 жыл бұрын

The purpose of the crankshaft is just to just mount the flywheel and the clutch. The spline just goes into the clutch not the crankshaft. The new clutch is meant for a 26 spline thus being one of the reasons he upgraded from the 10 spline. Plus the fact that they are notorious for snapping.

@bryanhallman8183 6 жыл бұрын

Ok, so it doesn't go all the way through, then. The more splines, the more divided out the torque, like the difference between the Phillips and a Torx.

@SC457A 6 жыл бұрын

Has more surface area due to more splines and it makes the stress points smaller since there are smaller and more splines.

@chaosgarage7877 6 жыл бұрын

Unrelated topic, but what did you do to cover up the holes on the spoiler delete for Turdzilla?

@MustangLifestyleTV 6 жыл бұрын

+Mustang Rhebb the wrap covered them lol

@chaosgarage7877 6 жыл бұрын

damn lol

@bradleypfeffer1716 6 жыл бұрын

Are you you facebook?

@azb_mach1808 6 жыл бұрын

Get it broke in change ashley clutch and go to track want to see y’all race

@jwyers10 5 жыл бұрын

Cant believe the pilot bearing was not changed

@krazz7598 6 жыл бұрын

Which car is Ashy driving to work ?

@MustangLifestyleTV 6 жыл бұрын

Brown car 😭

@alvindavis3 6 жыл бұрын

I know I'm cheap, but the $2,000 dollar price is just a tan bit over my head. I guess I'll slow down and keep my stock clutch working.

@SC457A 6 жыл бұрын

Mine at 64k looked better than that. Had fun replacing my input shaft. Edit. May have the most babied 3.4 Whippled Cobra around at 103k now.

@MustangLifestyleTV 6 жыл бұрын

+SC457A lol I launched this car hard on stock blower. 5K launches with 1.65 60 foot.

@SC457A 6 жыл бұрын

I understand. I only got a 1.88 60' using the basic bog technique, I did not want to slip the heck out of it since at that time it was my only car that was street legal. I was very happy for the 1.88, stock sized BFgoodrich TA with 25k on the tires.

@maynorsandoval8337 6 жыл бұрын

What ever happened to the guy with the full bolt on 5.0 that crashed??

@MustangLifestyleTV 6 жыл бұрын

he quit

@bullgt6170 6 жыл бұрын

What’s your wheel and tire set up all around? I think you said 335 in the rear but can’t remember, also which are the widest tires you were able to fit in the front and rear of either the Turd or the Cobra without having to roll the fenders or something of that nature?

@NOSKIDPLATE 6 жыл бұрын

Bull GT yes 335 in the back but I wouldn't go no bigger than 275 in the front I heard some people saying that it rubs and some people say it's fine. But another down side with 275 of bigger tires in general they like to follow dip and stuff in the road and could make you wreck into a ditch. But you can buy a bumpsteer kit to help that problem. But if you want 275 of front I would recommend nittos because there good tires and they typically run smaller than other tires. But I think 295,305 or 315 is more than enough rubber for the back unless if your running like 500 or more hp. Sorry for a the writing hope this helps.

@MustangLifestyleTV 6 жыл бұрын

fender rolling depends on a bunch of different factors: offset, height, and tire width. I rolled my fenders to run the 315s on the cobra. Turdzilla currently has a 275 on the rear. The Cobra now has 335s. Both Cobra and Turdzilla run 275 up front without need of fender rolling

@NOSKIDPLATE 6 жыл бұрын

Mustang Lifestyle who rolled your fenders and are there any waves in the quarter panel

@bullgt6170 6 жыл бұрын

KENNETH _2v I haven’t rolled them yet but I wanted to know what was the widest I could go without having to do so I’m on 275 all around but I wanna go bigger on the rear and thank you bro!!!

@NOSKIDPLATE 6 жыл бұрын

Bull GT welcome I have 285 out back what's your size wheel out back and what brand of wheel I'm wanting to roll my but I don't want to get waves in the fender

@anthonyhart6723 6 жыл бұрын

I want those tires lol

@devanclos1994 6 жыл бұрын

Clicked real quick

@MustangLifestyleTV 6 жыл бұрын

@MrMattman0127 6 жыл бұрын

Funday sunday 1-7-18. 🐢 vs 🐍

@mikegay8511 6 жыл бұрын

A Drone carry case.

@svttrouble5598 5 жыл бұрын

How do you know when it was time to replace the clutch? It maybe time for mine and I want to know the symptoms.

@svttrouble5598 5 жыл бұрын

@mustanglifestyle

@MustangLifestyleTV 5 жыл бұрын

Slipping clutch or trouble shifting

@svttrouble5598 5 жыл бұрын

@@MustangLifestyleTV Does the RPMs fall and rise and you smell a burning smell?

@djpoole1643 6 жыл бұрын

Where can i find a cheap mustang from '99-03

@NOSKIDPLATE 6 жыл бұрын

Dee-Squad Or No- Squad he's selling the red car

@djpoole1643 6 жыл бұрын

KENNETH _2v naw i want one that i can work on

@NOSKIDPLATE 6 жыл бұрын

Dee-Squad Or No- Squad well good luck just look around different websites

@Thelegendking-yj4bm 6 жыл бұрын

Just don't get a v6

@gmcsierraproject585 6 жыл бұрын

Put headders already

@doke5851 6 жыл бұрын

dude i think you should invest into a small (and cheap) truck. Seems like your always hauling something around.

@ItsMayzeh 6 жыл бұрын

First

@MustangLifestyleTV 6 жыл бұрын

woot

@680fisher8 6 жыл бұрын

Rip it 👌

@CookieMonster-ke6rc 6 жыл бұрын

I wanna see turdzilla😏

@MustangLifestyleTV 6 жыл бұрын

Me too!

@jaysteez2025 6 жыл бұрын

At least it’s not like Scotts clutch 😂

@KOSx15 6 жыл бұрын

Use the case as a camera case🤷🏻‍♂️

@MustangLifestyleTV 6 жыл бұрын

+KOSx15 that’s a good idea. A little heavy but good idea

@Thelegendking-yj4bm 6 жыл бұрын

Andrew. Need to also focus on merchandise DBP is starting a website for his merchandise we need to rep mustang lifestyle and get rid of that DBP squad

@MustangLifestyleTV 6 жыл бұрын

MustangLifestyle.net We have merch

@tomparry4313 6 жыл бұрын

That clutch is Terminated!!!