I could not find any videos to do this on my 2015 Freightliner Cascadia. I decided to put this up so that,1. I can remember how to do it later and 2. Maybe others are needing this for this particular tractor as well.
Пікірлер: 74
@EnligUlv Жыл бұрын
Common complaint: my tractor’s EF dash indicator is lit up but I can’t get the engine to regenerate the trapped exhaust. Not good. In time that dash light will go from solid amber to blinking amber and then to solid red… and you can’t move. Often, the system won’t initiate because of a possibility of two reasons… 1) the exhaust filter needs to be disassembled by a mechanic and cleaned (these filters are reusable), and/or 2) a leaky gasket (filter housing-exhaust pipe) is allowing cool air in circumventing the required build up of pressure and heat which initiates the regen process.
@MissLive910112 жыл бұрын
Ughhh thanks so much! So simple and easy and it worked for me as well. Appreciate it driver 🙌🏽
@TurboTitan840hp2 жыл бұрын
Quick and to the point, thx!
@zlatkojovanovic2 жыл бұрын
Thanks man good job👍👍👍 I appreciate your tips
@pb02asr263 жыл бұрын
Thanks for saving my time i was worried drivers around me said i broke down and will take 1 day to be fixed and about 10 hours to service call.
@joshual39022 жыл бұрын
Really appreciate it! Very helpful!
@sk8ter4fun2 жыл бұрын
Thank you man. I'm at a warehouse and I need a Regen
@luissaenz18096 ай бұрын
Thanks for this video it helped me get out of trouble
@stevebueno55982 жыл бұрын
Thank you! Works perfect!
@robbag204510 ай бұрын
Thanks from a green driver. Worked perfectly
@xclusivelunatic95402 жыл бұрын
Thank you I needed to use the computer to override but this worked too!
@blacklovely17463 жыл бұрын
omg perfect thanks so much it really works it just did it for me😊
@chefchiro2 жыл бұрын
Thank you very much brother. You lifesaver.
@otisreese792113 күн бұрын
Worked great for me!💯‼️
@stevesmith2350 Жыл бұрын
I just wanted to say thanks. I had to drive this truck today and if course it needed a Regen, but I was unfamiliar with this model. I was able to do the Regen thanks to your video!
@211marucha Жыл бұрын
Thanks so much for this information
@csgto7676 Жыл бұрын
Best video out here in the savage jungle we call trucking
@supergonzalez0021 Жыл бұрын
Heck yeah buddy this help me out 👍🏽
@smbabygirl82 жыл бұрын
Thanks, really worked
@hyperion_style7 ай бұрын
Currently watching your video, broken down on the side of the highway. Thanks for saving my ass.
@kevinkidane8613 Жыл бұрын
Thank you so much for help
@veganwilliamdotyfreshour36652 жыл бұрын
Totally worked going to make my own video also.
@philgaines88832 жыл бұрын
Appreciate it bro
@ugladden2 жыл бұрын
Saved me. Thank u
@reohorse428 ай бұрын
Thanks, good video
@TheJoeBeshai Жыл бұрын
Im a new truck driver I just started a couple months ago. They put me in a different truck that has that button. I have a RGEN button but I drive an automatic. What is the purpose of it exactly in an automatic. I'm assuming it has something to do with parking break compression?
@vladimirfontaine18682 жыл бұрын
Thanks!
@FISHUTOPIA2011 Жыл бұрын
Thank you so much.
@travinhebert50859 ай бұрын
Thank You!
@user-um4lm5dr5n Жыл бұрын
May I usk you. How about automatic transmission? They no clutch? Thanks
@Ouf2032 жыл бұрын
Thanks bro
@pcastalano323 ай бұрын
Thank U Sir
@hardeepsinghbehniwal3033 Жыл бұрын
Thank you
@bobbiebaswell5039 Жыл бұрын
Awesome
@fasaykosantos55298 ай бұрын
Perfect
@Louie489411 ай бұрын
Sweet 👍🏻
@tanvirdhanju6 ай бұрын
Thanks
@PaulMuntuKGL Жыл бұрын
Do you have to have the cruise comtrol on?
@MrBorri0073 жыл бұрын
Thanks for the video can I do this with my check engine light on
@UsedFieroParts3 жыл бұрын
When my Cascadia went out on me because of this...the check engine light came on as well as the Regen light. but after doing this procedure, they both went out. So, if the check engine light came on because of the need for a Regen...then it should work. But this manual procedure requires some long waiting...so be prepared to stay with your vehicle while it goes through this process.
@veganwilliamdotyfreshour36652 жыл бұрын
I’m so serious! Saved you a regen tool 139.00 bucks.. but you should get that noregon jpro it can remove the govern and other stuff important.
@ggraham99093 жыл бұрын
Question for you. What happens if your parked at a truck stop and the truck starts to regen automatically while on my reset? It happened to me, I just interrupted it and shut it down because I had trucks parked beside me. Could you give me advice?
@UsedFieroParts3 жыл бұрын
To be honest, the truck "should" regen automatically on its own. Most of the time it happens while driving and you never notice it. It was possible that it was ready to do a regen while at the truck stop next to other trucks... but I'm willing to bet that it would have been a natural cycle that was not going to go for several minutes. It was fine to stop it from doing what it "wanted" but hopefully it did it on its own later. If not, don't worry as you can still do a manual regen cycle if you wish or when/if the regen light comes on during your travels. Thanks for looking out for the possibility of other surrounding vehicles being in any danger. Better to be safe than sorry.
@ggraham99093 жыл бұрын
@@UsedFieroParts thank you for your expertise. It ended up happening the next time I did a reset. I just let it do it's thing. Only lasted about 15-20 minutes. Now I know what to expect. Thanks again. Be blessed.
@ESVerdePark2 жыл бұрын
👍🏽
@sahabsahab7805 Жыл бұрын
What about automatic shift ?
@sharrelson3344 Жыл бұрын
I guess it only works with the light on trying to do a forced one and not working
@UsedFieroParts Жыл бұрын
correct... i have noticed i can't do a forced manual regen unless the light is on.
@juancepeda96202 жыл бұрын
Quick question when should you do a regen ?
@UsedFieroParts2 жыл бұрын
The Regen process "should be" automatic on most. Meaning...the vehicle will "ask" for a regen by illuminating the indicator. OR the vehicle "should" automatically regen during traveling. Sometimes though the vehicle can't regen properly during travel and will "ask" for a regen by illuminating the indicator. Main thing is that if the indicator is not illuminated...you can't put the vehicle into regen mode. Hope this helps.
@juancepeda96202 жыл бұрын
@@UsedFieroParts yea thanks
@diegozorrilla37792 жыл бұрын
Dude u just saved me
@Hellokinni2 жыл бұрын
And how do you do it on an Automatic transmission
@eastcoasttrucking20752 жыл бұрын
Same here I need help too Auto
@makincash33372 жыл бұрын
Put your foot on your brake. Put in d or r. With foot still on brake put back in N. Keep foot on brake and finish the video. It may take a couple trys to get the timing right
@UsedFieroParts2 жыл бұрын
Thanks for the info...I hope those tips work for those with Auto.
@johnny712110 ай бұрын
ok, I keep doing this, but in low gear while driving, the light shows up, and gets smelly in the truck. then after a while, it goes away... (I had my PDF filter replaced, costs about 5.000) but still...
@johnny712110 ай бұрын
before I had the PDF replaced, the smell was so much worse while driving and idling...now it happens rarelu, like, every day or so.
@schfiftyfive96802 жыл бұрын
Wtf mine refuses to Regen when I do this and the little Regen light on the dash just flashes at me. Any idea what this means?
@abdulilyazov2 жыл бұрын
Same shit on my truck, any update?
@daveconlin83422 жыл бұрын
If it worked the way it did for him we wouldn't be here.Was hoping there was some step I was forgetting.
@veganwilliamdotyfreshour36652 жыл бұрын
I am not sure if it will work when only my maintenance, check engine, and stop light indicators come on. However I did try this while only the maintenance, and check engine light indicators were on, but nothing - no regeneration… I bought a tool it worked but now it doesn’t… so I’ll get a jpro… and I’ll hope that this works when only my three light indicators mentioned above appear… if not then I gotta pull a doser sensor and clean it or maybe get two nox sensors replaced?!! Sheesh!
@EnligUlv Жыл бұрын
Your system probably includes a reusable exhaust filter that needs to be cleaned. Also, the exhaust needs to reach a certain temp before the regen process will work. Many tractors will have the problem of a flashing dash indicator but can’t initiate the system to begin the process because the filter exhaust housing to the exhaust pipe GASKET is not air tight any longer allowing cool air to cool the system heat circumventing that required temp sweet spot. Could be simply a faulty gasket or your exhaust filter needs cleaning, or both.
@captainwilliam9971 Жыл бұрын
Mine does that. Always have to wait till im bck to the shop to use the laptop and force a regen. I ended up needing a new 1box. To much time sitting and idling at the mills. Sucks when its peace work lol
@raindancer456 Жыл бұрын
0:57 start regen
@lioncat523022 ай бұрын
Didn’t work and I tried it multiple times with 2 different trucks
@kaseyhicks6976 ай бұрын
If it doesn't work it could be a dozer valve
@cablanchette1 Жыл бұрын
Okay, so you actually parked on the street?... You're actually in a lane of traffic?.. that's how it appears.... And you decided to turn your 4 way flashers OFF?... Where did you learn that?....
@UsedFieroParts Жыл бұрын
lol I guess from generally looking at this video and "out my windshield" you would think that... It was very early morning just after doing a live unload. This is the business district area so no one was parked on this side at this time. There was posted signage for no parking for street sweep...but i figure it was not going to take too long.... it did take much longer than anticipated but it was all good. I turned off the flashers only because it was not really needed as i was parked just like any other vehicle....although no one else was parked on that side due to street sweep day restriction. but yes i agree that looking out my windshield, it appears that i just stopped in the middle of traffic....lol Thanks for the feedback, and asking about it...instead of just accusing me of something. I appreciate how your comment says "that's how it appears".
@cablanchette1 Жыл бұрын
@@UsedFieroParts I wish your regen instructions works for me, but I think I have other problems