This is so great to hear! I'm happy the video helped you out and I wish you safe travels!

This is great to hear and I'm happy I was able to help! Safe travels!

Hi Matt, our Vista and your Sightseer should have very similar systems, so if you think of any questions I will do my best to answer them and make a video about it. Sabrina and I are planning on being at the Winnebago Rally in July, maybe we will see you there!

Thanks Doug, I wish it would let me operate the levelers independently. I think that is a great feature and would be very useful.

I have tried it in the past and nothing happens. I will try again on Monday when we move again

@@MovingForwardAdventuresI checked the manual and yours should also do it, tried to post the url but you tube didn’t like it

Yeah, KZfaq usually blocks links. There is nothing I can do on my end to allow then to come through. I am definitely going to give it another try. It would be very helpful to be able to fine tune our level.

So, I have now tried this a few times and I can get it to work, but only sometimes. It seems I need to be right on with my timing of pushing both buttons. Most of the time, it is not allowing me to do it. I appreciate you letting me know that it is actually possible!

Jeff, I think once you get the hang of it, it's easier and faster than the auto setting, plus I like that I can fine tune the setup. You know Sabrina and I saw you & Nancy getting on a bus last year, we think maybe at the Albuquerque Ballon Fiesta, we tried to catch you guys, but we were too far back and you were already boarded. I hope the manual leveling works out for you. Hope to see you on the road or at next year's Winnebago Rally

Hi Kenny; yes we were there last year went with escapees had a great time & also crewed on two balloons, Wish we did meetup. Take care safe travels and hope we can meet up on the road. We’ll be at the Fmca rally in Indio,Ca then on to Quartsite Az, any chance you’ll be at either one?

Hey Jeff, that was definitely you that we saw, darn it. We really did try to catch you. We are not going to be at That FMCA event or Quartzsite, but I will be at FMCA in Tucson un March, Sabrina might be there too if she doesn't have to work.

Hi Kenny; After the big Q we head back to Florida & think about where we wana settle down since we sold our house back in 2022. Safe travels to you both❤

Glad to hear the video was helpful! Safe travels!

Hi Robert, glad you enjoyed the video. We are planning on making a couple new videos this year.

This being our only RV, we have always had power levelers and are probably very spoiled by them. Can't go with the tried a true level, that us for sure, but the door trick is pretty good for those one night stays. Take care and safe travels!

Perfect, glad the video helped!

Glad to hear you liked it!

Great you enjoyed, hope you found it helpful.

Glad it helped out! Now that you are level, you should be able to use this new point as your home level point following these steps. 1. Once the trailer is level, turn off the touch pad. 2. With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times. 3. The touch pad will flash and beep and the display will read “ZERO POINT CALIBRATION ENTER to set, Power to Exit”. 4. To set the current position as the zero point, press the “ENTER” button. 5. LCD display will read “Zero point stability check”. 6. LCD display will read “Zero point set successfully” once process is complete. I am out on a trip right now without my manual, but I found this on Etrailers website. Let me know if that works. If not I can check the manual once I get back home.

@@MovingForwardAdventures You did lot of extra work.for us. I have seen how to calibrate it so again, thank you for the etrailer guide. I will do the calibration tomorrow since we have it in perfect level now. There is no other video with the explanation saying 2 jaks will work always together. I was hoping so but now thanks your vid I know for 100%. Well have a save traveles...we are heading to big band in 10 days. Sorry for my English..hope it's understandable.

Ok great and no problem! I am happy to help. Wishing you safe travels as well and enjoy your trip. That is one of the national parks that are still on our list to check out.

It's surprising of how many different systems and methods of operation are out there. I wish we could operate each jack independently, it sounds like a nice feature. Take care and safe travels!

If it is setup like ours which I think it would be it should work without shore power. Our Jack's operate off our chassis/starter battery so we need to have our RV running, if I push the power button too fast after startup I will sometimes get a low battery message, but then goes away once the engine is running for a second or two. I think you may have a battery issue and probably an easy way to test it is, if you have the battery boost button push and hold that while turning your LCI on. The boost from the house batteries should bring your chassis battery up to the proper level. If that works and doesn't give you the low voltage error I would then say you have a bad chassis battery. I hope all of that makes sense, I have a tendency to ramble in text

@@MovingForwardAdventures Thank you - great information. I was told by Camping World that the LCI worked off of the house batteries. I replaced those - didn't change a thing. The only battery I haven't changed in th four years we have owned the RV is the chassis battery - probably due for replacement. I will try the things you shared. Thank you so much!

Ours definitely works off the chassis battery. I would think all the manufacturers wired them the same, but you never know. Good luck and let me know if you think of any other questions. - Kenny