How to manually override a Harley-Davidson Security Alarm

Рет қаралды 999,897

Күн бұрын

Here is how to set or change a Harley-Davidson Security System Alarm Override PIN code. With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever. If the battery in your FOB dies or it is damaged and you have not set your Harley Alarm Override PIN Code, you will not be starting your bike. We also show you how manually start you Harley-Davidson using the override PIN number.
For more information on how to set your Harley Alarm Override PIN Code, visit gonetouring.com.au/PlanYourRid... or check out other handy Harley-Davidson tips under the Plan Your Ride tab.
Visit: www.gonetouring.com.au for more information, and keep and eye out for more biker info on Heavy Duty TV on channel 74

Пікірлер: 219

@Lighteye67 8 жыл бұрын

You saved my bacon at a rest stop 2 days ago when I came out of the bathroom and realized that somewhere in the last 150 miles of highway travel, my fob had come out of my pocket and I was (momentarily) stranded. I had forgotten how to do this, as the dealer never explained it and I had only read about it in the manual. A 4G phone connection to this video got me rolling homeward. Thanks a ton!

@gonetouringaustralia 11 жыл бұрын

Thanks for the kind words. I really like the Street Slammer bars, great for cornering through the hills.

@fastvettes 6 жыл бұрын

Excellent !! This (and the other similar videos) give some great instructions on changing and over-riding your PIN. As noted, in the event of a dead FOB battery, or in my case, a lost FOB, you are simply dead in the water w/o knowing this info....happened to me on my '08 FXDWG, but luckily was only 4 miles from my house and could retrieve the other FOB....had I known the override sequence then, woulda' saved me some hiking !

@ron13quesada16 9 жыл бұрын

Invaluable information, thank you so much. Just got my Harley and didn't know this was even possible. The previous owner didn't tell me about this. Now, I'm going to change the pin to something I only know, thanks again.

@gonetouringaustralia 9 жыл бұрын

Thanks for the kind words Ron and we're glad to be able to help out.

@alanwhiteside410 5 жыл бұрын

Ron13 Quesada I bet there is a lot of bikes out there that still have the factory PIN number on them and they are all the same Pin. Crazy

@Robert_Mark_Norris Жыл бұрын

Quick addition: 2008 Heritage Softail required one extra step at the end: after pin and run switch is on…put bike in gear then back into neutral before starting. Works when nothing else worked! Took 10 videos to finally find this one and I had to rely on a bloke from down under! Thanks mate!😂

@gabor222 7 жыл бұрын

Thanks for the information. Does it work differently with a pushbutton-FOB?

@jonathanchitty2913 8 жыл бұрын

Excellent summary - and totally different to my Rocker C manual: the instructions in which just would not work. So about time HD updated the manual??

@NANKEL1 11 жыл бұрын

How do you install a new fob if you have damage one? Also very handy tip to know

@darkshadowii4765 8 жыл бұрын

Is the second procedure you showed the correct procedure for trailering as well?

@GiftBarn Ай бұрын

Would you happen to have a video on how to program a new fob for this same model bike?

@leoinferos 7 жыл бұрын

Hi. Have you ever heard if there is a limit of times you can use the override code? I lost my fob and will be able to pick a new one at the dealer only on monday and I'd like to keep riding on the weekend. The bike is a 2016 FLHXS. The closest dealer said I can use it about only 30 or 40 times and then the bike will not start anymore but I didn't find that information over the internet.

@gonetouringaustralia 11 жыл бұрын

Hi Kel, you will have to get your dealership to program the new FOB to suit your bike. It is quick and simple process. And thanks for the kind words

@Jazz5729 10 жыл бұрын

Hi, nice videos, I like them. I was wondering if you can show how I can toggle between chirp-chirpless modes in my HD. regards Pascal

@elizapat 5 жыл бұрын

Trying to test starting with the pin, but my sporty also has a Siren security. As soon as I turn on the ignition she wails on! Any suggestions would be appreciated.

@mrk7201 3 жыл бұрын

Great can you keep it in this mode?

@PuppetMaster48 8 жыл бұрын

Do I follow the same instructions for 2014 Harley 48?

@alectraproject 9 жыл бұрын

Just pull the fuse that you have installed outside the battery cover discreatly and walk away. The alarm should still have all of the functions as with its battery backup?

@jgunslingerj 8 жыл бұрын

Thanks for the tip, it works for me. p.s.Incredible energy man. haha

@oldpoop47 9 жыл бұрын

does this shut it down forever? or is it a one time deal?

@danhawkins7060 4 жыл бұрын

Great video. I tried the procedure to find my code and it did not work. Any ideas? Thanks, Dan

@legalsolutions07 11 жыл бұрын

Good video and it was helpful. Nice to see another touring Harley with street slammer bars. I have the chrome version on my Road King.

@bikersoncall 3 жыл бұрын

It would help if you stated which years this covers.

@niggz99 11 жыл бұрын

I have a 07 dyna streetbob...want to know how to change from chip to chirpless mode smart siren

@rdb23gs 2 жыл бұрын

The best I have seen, because ir is complete! Thank you very much!

@jenpizarro3535 11 жыл бұрын

Thank you, exactly what I was looking for.

@phantombadger 10 жыл бұрын

BAHAHAHAHAAHA the second camera shot is fantastic.

@bob6168able 8 жыл бұрын

Hello mate ... Thanks for the tip. I have a different issue if you would be able to help me with .. When I press the start button on my fatboy, i have no response (as the case when the bike gear is not neutral) .. Is there certain reason for that? is there a way to restart the whole system of the bike. ? Also do you guys have any video for drilling stock mufflers to get deep louder sound? Thanks

@MadsWorld34 8 жыл бұрын

all i have to say about this is THANK YOU THANK YOU THANK YOU. i have been fighting with my key fob for over a month now sometimes it will work and sometimes i wouldn't. now i can ride it until i get paid and get a new key fob. now the next question do you know how to program a new key fob so i dont have to give them $55 of my hard earned money

@adechapman.1132 5 жыл бұрын

Good video. Well presented. I'm going to have to study the manual as this does not work on a 2017 fatbob

@marcelolima2437 11 жыл бұрын

Amigo, este vídeo me tirou de um grande problema aqui no Rio de Janeiro (Brasil), Obrigado por postar este vídeo sem o qual eu ia ficar enguiçado. MUITO BOM.

@hurstshiftin9873 4 жыл бұрын

Clear straight forward easy to follow thanks.

@jt1679 4 жыл бұрын

I’ve got a 2007 nightster 1200xl. I’ve been struggling for years with this security system issue. More money, mechanics and lost riding time than I care to mention. It has a key fob which I regularly change the battery in and an ignition key. The bike never starts! It gets “fixed”, works for a few rides, and then doesn’t start again. Currently broken. Can the system be permanently disengaged or removed? If not, what I can do?

@Comeoffitman 7 жыл бұрын

That is some good information! Reminds me of a kid in my 3rd grand class who didn't know you don't eat the little round balls in the grass. He thought that they were candy. We should help people out and give them free advice so that their breath doesn't smell like rabbit poop! Good video.

@evil_musclemuscled3814 6 жыл бұрын

Will this work for the 2016 breakout

@mbbeachguy 5 ай бұрын

Thanks very much for this info. I had my fob fall out of my pocket and it got crushed. I’m going to use this and take it to the dealer on Friday. Thanks for all the help.

@exupakias 2 жыл бұрын

Nice video.Thanks

@ari110 Жыл бұрын

Does it work on one time or does it disable alarm until you do PIN code again?

@robg3284 2 жыл бұрын

i tried this with my 06 flstci heritage and would not work. any ideas? cheers rob, (great videos by the way)

@gonetouringaustralia 11 жыл бұрын

No Worries, glad we can help out

@devenhooe9869 2 жыл бұрын

Finally found the one that worked for my 08 V-rod, guess different actions for different years or models, thank you!

@bradleykirwan 9 жыл бұрын

Wonderful video. The presenter does act and speak as if he was forced to make this video at gunpoint however.

@motochiptuning 6 жыл бұрын

This dissarmes permamently or untik next start?

@gonetouringaustralia 11 жыл бұрын

Estamos felizes nosso vídeo foi útil. Obrigado pelo feedback agradável.

@evikens1571 8 жыл бұрын

Thanks a Lot.My Manual seems to be wrong at this point.With your Help I was able to solve the Problem

@beatrizvalencia1786 9 жыл бұрын

can i do this in 09 sportster nisgter ? i set the fob but it wont starter with out the key :(

@MartinPoncelet 4 жыл бұрын

Hi, thanks for the quick and short explainations... But my 2005 Road King didn't showed is PIN following these On/Off(x2)+On & (3x)LeftTurnSignal & (1x)RightTurnSignal :-(... Any ideas why? Otherwise that might be good for other HOG #HR2U

@epavlov 3 жыл бұрын

same on my 2001

@mancuusa 10 жыл бұрын

hi how are you I just purchased a used Harley 05 road glide didn't came with the FOB and alarm its off...so works but I don't have a code or nothing...what I do buy a FOB?

@rdy1717 11 жыл бұрын

Good Helpful tips.. But I have a 2007 Sportster,, Alarm Blinks and like I dnt ride that much it kills the Battery. There a way to stop the red light from Blinking.

@chut213 10 жыл бұрын

you still need the assigned fob to make these changes... and these changes are also detailed in the owners manual for the bike. my fob battery died on me and that code allowed me to get the bike started anyway. I keep a spare battery on the bike for now on

@papothetech 2 жыл бұрын

Tried those steps a few times for my 2012 softail and could not retrieve PIN number. Is there something wrong with my alarm system? Had HD change pin when new bcm was installed 6 years ago and I forgot it.

@anthonydemag2169 8 жыл бұрын

how do you disarm 2008 883 so it will start the guy lost the remote he said i was going to buy it but the security was on so we could not start it or can we get a remote for it from the dealer with the vin number

@user-wg7dx7er8w 4 ай бұрын

Hi 👋, Gone Touring, from the other side of the world 🌍, I have just purchased a 03 DEUCE, and I couldn’t find a way to disarm the alarm system, the guy who delivered it to me, had a problem as it was in the back of the van, the alarm kept going off, so when we remove bike from van the battery is flat, In next day or so I’ll reset the pin number and turn the alarm off, thank you for your info, very very much appreciated, From France ,

@gonetouringaustralia 11 жыл бұрын

No Worries, Glad the video was helpful

@sinister13cruz63 4 жыл бұрын

Thanks for the info great video

@Roadking97100 10 жыл бұрын

Hi I am not sure that my RK 2002 have a pincode, I use only my FOB, How can I make a new pin code on it?? thanks

@lukealvarez5240 Жыл бұрын

Will this procedure work on a 2005 Dyna Super Glide?

@peterrei280 8 жыл бұрын

Very useful: good video

@gonetouringaustralia 9 жыл бұрын

Thanks for the comment Tricia, The only time you need PIN number is when the FOB battery goes flat.

@GrizzlyNation1 9 жыл бұрын

gonetouringaustralia or if you turn off your bike in areas where walkie talkies jams the system if similar bandwidth is used ;-)

@PapaElegua Жыл бұрын

FANTASTIC! I’m buying a new (to me) Heritage Special and don’t think the seller has this info- but now I do, for when it arrives next week!

@djakpineapple1631 10 жыл бұрын

This doesn't work for my bike. It's an imported US model. Is there a reset procedure a owner can do or is it best to take it to a dealer? Thanks

@ronkoyonagi4907 4 жыл бұрын

I have an 07" Sportster..it has an ignition Key and the Fob....How do I get the code on my Bike ? Thanks

@stevemollica4948 4 жыл бұрын

Great video helped me alot brother thank you saved me 400 $$$

@lucasguti20 7 жыл бұрын

Does this works on an Iron 883 from 2014?

@ivimanowarivi9476 8 жыл бұрын

Soundrack ?

@georgesanchez9971 5 жыл бұрын

Thanks you are a life saver!

@stefsrb8098 10 жыл бұрын

just realized I forgot mine but if I have fob I would be able to see it once I go in it?

@jpphd5685 4 жыл бұрын

Yes

@simonevannoli4500 3 жыл бұрын

Hi, pls I need to start the sportster 883xlh 2007 purchased on auction. With key bat no fob or pin. How can I make start it? Thanks lot.

@HDMann292 6 жыл бұрын

my 03 roadking security giving me issues. i have pin code. but cant get it activated to over ride?

@erinlomakin 3 жыл бұрын

Hey dude how am I to check my current pin when the battery in my fob is dead

@hotjockey1 9 жыл бұрын

I tried this and it just set the alarm off, so I rang my dealer and they gave me the pin code over the ph, yes I can now start my bike without the fob, but lol I can not change the pin with your video sequence. also while setting it to entre my pin I found by pressing the left indicator only twice works as to pressing it 3 times it has already moved onto the next pin digit, its a street bob 2014 but made in Dec 2013 with button less key fob. Do you know why this bike seems to be different ?

@ne1cup 5 жыл бұрын

this does not work (is different) on the 2017-2018 models?

@lishagarcia4647 5 жыл бұрын

Hi can you tell me why my key symbol stays on my speedometer 2008 Harley softail

@alanriddell8821 9 жыл бұрын

I cannot get the flashing dashes, however I was able to do it before. Then one day it just would not do it. Any one have a clue what I should do?

@maje000 11 жыл бұрын

hahahaha tku brother,estuve leendo el manual y nunca le esntendi,tu explicacion fue super facil

@vauxmoto9096 6 жыл бұрын

Nice video. Subbed!

@rickhill56 Жыл бұрын

So what years does this system apply?

@gonetouringaustralia 11 жыл бұрын

You more than welcome, glad it was of some help

@robinstone9207 9 жыл бұрын

Had this issue and got my bike to start with the pin but now you have to do it everytime. Is there a way to disarm the security all together so I don;t have to get new fobs?

@gonetouringaustralia 9 жыл бұрын

Robin Stone Hi Robyn, sadly its either replace the FOB batteries which is a simple job like in this video kzfaq.info/get/bejne/es-Zg9dquLTSYnk.html or purchase a new FOB if the old one is faulty. We wouldn't recommend removing the security alarm as it could effect your insurance and resale value. Good luck and thanks for watching.

@gregjarrett2890 8 жыл бұрын

Thank you exalt demonstration

@aa1mnu1u2 10 жыл бұрын

Good video!

@tonycorvettes 10 жыл бұрын

hello good videos,thanks also can you help me on this? i have a good fob came with my bike,but want a spare ,i found a fob i had with another heritage i sold,can you tell me how to program it?

@gonetouringaustralia 10 жыл бұрын

Hi Anthony, you will need to take you FOB and bike to a Harley dealer to have the FOB assigned to your bike. You can buy spare FOBs if you loose one too.

@starsatnite5803 8 жыл бұрын

Tried this numerous times.....could not get it to work. I discovered that the "RUN" switch must be in the RUN position......this wasn't mentioned in the video or the manual. Handy piece of info. Great video. Thanks

@gonetouringaustralia 8 жыл бұрын

+Dennis Ross Hi Dennis, you may have a different model to our bikes as our two bikes won't work in the "Run" position as you suggested.Thanks for the info. We'll endeavour to find out which models need to be in the "Run" position.

@gonetouringaustralia 11 жыл бұрын

Glad we could help out

@kevinfortyseven2244 10 жыл бұрын

I have this problem with my harley softail. I ride the motorcycle to wherever and when I sometimes park it and then go away from it for 5 minutes and come back the turn signals start blinking(without headlight on and horn) its silent. But the signals stay blinking forever until I disconnect the battery. Even after inputing my 5 digit pin to disarm the motorcyle it still wont turn on. This only happens sometimes tho. Could it be that the FOB key battery is bad or cuircuitry on the bike is bad? PS:sorry for bad grammar

@gonetouringaustralia 10 жыл бұрын

Thanks for viewing our video, we will get some expert advise on your problem and get back to you.

@soundretarded Жыл бұрын

Thank you so much!

@BestEmulator 6 жыл бұрын

Which Harley model is it

@RenManinJapan 11 жыл бұрын

thanks for that..never had my fob die....but I better check my code again to make sure I know it....just in case! good info....great video!

@4x4Tinny 9 жыл бұрын

I done this to a mates Dyna without an issue. But when I tried it on my 2011 Fatboy the option doesn't come up? Any ideas? Irang the shop and they dont have the original pin?

@gonetouringaustralia 9 жыл бұрын

fourbyfour Tinny Hi TInny, We'll do some checking for you, however we've checked the 2011 HD manual it explains it the way the we did it in the video.

@PierreC61 2 жыл бұрын

Thanks, that help me. Pierre From Belgium

@meeeeedo0765 Жыл бұрын

I lost the fob and the key, Harley Subster 2012, and I brought an iron key only from the company in the United States of America, but I could not turn on the bike. Do you have a way to bypass the security system and turn it on?

@gonetouringaustralia 11 жыл бұрын

Hi Albert, we'll see what we can find out for you

@gonetouringaustralia 10 жыл бұрын

Hi Pablo, you will need to purchase a H-D Factory security system to suit your bike. The part number can be found on page 794 of the 2014 Genuine Motor Parts & Accessories book or just ask your local harley dealer to order it in for you.

@samg9286 7 жыл бұрын

Thanks, it worked.

@Starbuck.Laniakea 5 жыл бұрын

I hope this works for resetting the alarm... but maybe I should get a replacement battery for my fob first. The bike has been sitting with a dead battery after my spouse was killed. Im finally getting around to it.

@nickkorte 5 жыл бұрын

Sorry to hear about your loss. Keep the bike and ride it in his memory!

@jjthomas6321 2 жыл бұрын

This is one of the most helpful and most straight forward video’s for the bike, good work mate

@RenManinJapan 11 жыл бұрын

I have a 2010 Fat Bob....I took mine off...I still get the lights to flash...and then i bought the key chain fob from harley...so if someone moves my bike it will beep...

@richardread971 4 жыл бұрын

how do you reset the alarm after overriding it

@sacredlifeguard6783 5 жыл бұрын

Awesome...thanks so much:)!

@chopperrick 2 жыл бұрын

He says that you need to have the fob with you. How does this video work if you have a dead fob or lost your fob? Does it work on bikes without a fob or pin number?