How To Master Your Track | Mastering Tutorial

How To Master Your Track | Mastering Tutorial | FL Studio Tutorial

Рет қаралды 19,803

4 жыл бұрын

Hello Broducers!
In this video I show you my mastering chain. For this tutorial I used an unfinished bigroom track by me and tried to master it without killing its dynamics.
In the video I showed how to setup your mixdown in terms of headroom before you start to master. It is really important step.
Firstly I used Fabfilter Pro Q3 to get rid of unwanted low and high frequences. Then I used mid/side EQing to make my bass area fully mono. It is important because if the club system got mono subwoofer, this way your track will bang better!
Then I saturated my mix a bit to get a warmer feeling in the mixdown. And glued everything with compressor.
Lastly I maximized the track and boosted it without killing the dynamics.
Also in the end of the video I showed how to measure your track in streaming platforms such as Spotify, Apple Music, KZfaq etc.
I hope you enjoy the video. If you got any questions feel free to ask me in the comments.
Follow me on social media:
/ ozgun1
/ officialozgun
/ officialozgun
open.spotify.com/artist/0cKY4...
#FLStudio #Tutorial #BigRoom #Mastering
----------------------------------
*My new FL Studio 20 course is available on Udemy. Check it out!
*Udemy için hazırladığım FL Studio 20 derslerime göz atın!
bit.ly/3cqHDPc

Пікірлер: 51

@priyangshusaraswati4067 4 жыл бұрын

Awesome tutorial man!👍❤️

@matekfj 3 жыл бұрын

Great tutorial, awesome track!

@d3nni283 3 жыл бұрын

Imagine hardwell playing this in the UMF!🔥

@ahmetsipahi9878 4 жыл бұрын

Nice job broo ✌✌✌

@IMMaSterGAMER 4 жыл бұрын

Thank you very much.🙏🏼

@XAVIER-iw1xl Жыл бұрын

You are amazing

@SpunkOfficial 4 жыл бұрын

Greetings from Kars!! Great job!

@haleghalef1949 4 жыл бұрын

عا رى ىئئىخ ط

@mackeymusic3024 3 жыл бұрын

Very helpfull lacture ❤️❤️❤️❤️🔥

@M1N3RO Ай бұрын

BEST VIDEO!

@reuphtop9135 5 ай бұрын

Borat have nice rhythm

@mehmetabdullah250 3 жыл бұрын

3 saniyede yakalandın usta aksandan :D Attım like'ını, bir ara bakacağım diğer tutoriallarına da.

@electrohouse363 4 жыл бұрын

🔥❤️♥️

@yankelecom 3 жыл бұрын

Hi Can you make a video about the slope of any EQ, compressor? 3dB slope or 4.5dB slope per octave

@itsstreetboy 3 жыл бұрын

Is this track out??? It sounds amazing🔥🔥🔥

@Mr.MichealJod 4 жыл бұрын

Love your master chain and I learn alot :) can I use Softube One Knob Saturation in replacement of waves nls bus stereo for Saturation ??

@OzgunOfficial 4 жыл бұрын

Yea it works so well. Also in video I think I made 6 db saturation but if you keep it on 0 I think it sounds better.

@Mr.MichealJod 4 жыл бұрын

@@OzgunOfficial Okk sir thank you so much :)

@samuelemanta 3 жыл бұрын

konsol by analog obsession is better

@ukarzpierug780 4 жыл бұрын

Brooo, very usefull tutorial its amazing 😍 How many LUFS should I reach when for example I want to upload it on soundcloud ? Thanks

@OzgunOfficial 4 жыл бұрын

-14 is a good place to reach. But you can go for -10 area too.

@kyawsan8586 3 жыл бұрын

Hello Respectable Ozgun! I Love your Master Chain Dude.! Fantastic! and I learn a lot with it. Thanks you so much Ozgun. And let me advice you. Could you make Big Room Festival Tutorial? After than how to mix and master it with stems? I know you can do it Ozgun. Please make it out and share your knowledge to more develope your production skills dude. Just advice. I can't replace it with my chocolate. It's really Sick!!!! When you read it please reply me Ozgun.

@OzgunOfficial 3 жыл бұрын

Yo man, glad you like it. Stem tutorial would be nice. I have little time for shooting videos but I'll be shooting it soon.

@bassjackerfan5392 2 жыл бұрын

0:49 12:45

@ukarzpierug780 3 жыл бұрын

Ozgun I have a question ! My track is -6 LUFS and I want to put it on spotify, so should I just reduce the gain on my limiter to make my LUFS lower. But it will also reduce the DB and I dont know If Im thinking right. Thanks !

@OzgunOfficial 3 жыл бұрын

If it sounds good on -6 LUFS I would not reduce it. Let Spotify do the rest.

@ukarzpierug780 3 жыл бұрын

Thanks

@rauf9418 4 жыл бұрын

Bro normal studio kulaklıkları yaniltir mi yani "stereo image"işlemi için?

@OzgunOfficial 4 жыл бұрын

Evet, eğer kapalı kulaklık ise stereo alan çok doğru gelmiyor. Açık ya da yarı açık kulaklıksa biraz daha iyi iş görür. Handikapları var ikisinin de. Kapalı kulaklık daha iyi bass verirken açık olanlar stereo alanı daha iyi verir.

@andrejskaliberovs7307 3 жыл бұрын

I made some beat on FL20, on my studio speakers it sounds how I wanted, but on earphones - earbuds bass-line sounds distorted/harsh.. very bad, don’t know how to fix it. Made it on 3x Osc. Is this because I didn’t master it yet or I did something wrong in begging? But why it’s sound nice on speaker but bad on earphones? Thanks anyway

@OzgunOfficial 3 жыл бұрын

Make sure you are not clipping.

@priyangshusaraswati4067 3 жыл бұрын

Will FabFilter Saturn work for the saturation process?

@OzgunOfficial 3 жыл бұрын

Yes but it's so tricky for me to use it on mastering.

@Pulsed101 3 жыл бұрын

Anyone recommend a good VST for this kind of sound?

@mr.player7104 2 жыл бұрын

Theres many.cracks of it bro

@metodiyebiri 3 жыл бұрын

Abi bence videolara Türkçe altyazı eklesen çok güzel olur.

@madhukarchintha7141 4 жыл бұрын

Hello can i use these mastering chain for tech house tracks

@OzgunOfficial 4 жыл бұрын

Yes it should work.

@ludzludz8654 4 жыл бұрын

Hi. I have a problem: I have 10 db of headroom and when I am limiting or soft clipping my track it gets distorted. I can go maximaly to -10 LUFS but I need a -7. What can I do?

@OzgunOfficial 4 жыл бұрын

Clean your low end. Check all elements in your mix and try to make them fit. Then you should be able to maximize it.

@ludzludz8654 4 жыл бұрын

@@OzgunOfficial I have cut all lows even from kick and sub bass (below 30 Hz) .

@ludzludz8654 4 жыл бұрын

I have cut more lows (below 40 Hz) and made them quiter. I have made the highest frequencies louder. My track is maybe a little bit better but I can not achieve magic -7 LUFS. What can I do know?

@_TheViewer_ 3 жыл бұрын

Try to give it a little bit more input gain. Limiting or soft-clipping will tend to do more distortion. Example, if you need to get more louder than your unmastered -16 lufs, try getting 9 dB from Input instead of limiting it per threshold. Keep -0.1 true Peak limiting