How To Mine BTC at Home with Hydro miners X2 S21/S19/M33/M53/M63

Рет қаралды 7,552

4 ай бұрын

Get a 10% Discount by using this code : 15KW
www.asicshield.com/product-pa...
www.cryptomininglab.net/produ...
a perfect solution for small scale Hydro mining
a dry cooler with a capacity of 15Kw that can handle 2 units of any of hydro miners available in the market

Пікірлер: 48

@Crypto_mining_lab 4 ай бұрын

Get a 10% Discount by using this code : 15KW www.asicshield.com/product-pa... www.cryptomininglab.net/produ... a perfect solution for small scale Hydro mining a dry cooler with a capacity of 15Kw that can handle 2 units of any of hydro miners available in the market

@JorgeGarcia-ph4le 2 ай бұрын

Hello friend, is the Y coupling 1/2" or 3/8"? Is the hose that enters the miner 10mm or 12mm? Isn't it better to use g12 cooling liquid? thank you

@Grimmjar 4 ай бұрын

I use a heatgun on the radiator and miner if it´s to cold. Ready in 10 min at 10°C.

@Crypto_mining_lab 4 ай бұрын

thats a good solutions too , thanks for sharing

@YoanGonzalez-yr2rf 2 ай бұрын

Can you make more videos about the s21 hydro, I'm considering getting one and also the 15kw radiator.

@Crypto_mining_lab 2 ай бұрын

The S19 hydro and S21 hydro are the same in terms of cooling requirement , so what works for the S19 will definitely work for the S21

@UnistarAda Ай бұрын

Have you bought S21 HYD?

@samooburst8548 2 ай бұрын

What's cable size from fuse box to miner's breaker is it 2.5mm or more

@Crypto_mining_lab 2 ай бұрын

if you are referring to the power cord for the miner , it is the standard cable form bitmain for S19 Hydro , if you referring to the cable coming from the main breaker to the the miners breaker , then it will depend on how many miners you running on a single cables

@beny68eos 4 ай бұрын

When using Vnish firmware, you don't need to wait for 20*C hot water. They have a start at 10*C.

@Crypto_mining_lab 4 ай бұрын

Yes that's true because with an aftermarket firmware you can disable that , but it comes at a price where you need to Pay 3% of Dev fee to the firmware developer that's why i didn't use a third party firmware on the video since most people will keep their miner on a stock firmware , but thanks for the input

@beny68eos 4 ай бұрын

@@Crypto_mining_labIf there is not yet a Braiins OS for S19 Hydro I use it because of the automatic reboot in case of loss of connection or undervoltage in the network. It works great for that.

@portzir 3 ай бұрын

Hello Sir thank you for your videos, very valuable information. What is the temperature of the water that gets out of the miner? If I were to heat a storage of water with it, how hot could I get the water?

@Crypto_mining_lab 3 ай бұрын

the temps of the coolant out of the miners is usually between 65 to 80 C depending on how efficient is your cooling , and you can definitely reuse the heat for other purposes

@Mr.cold.as.ice. 3 ай бұрын

Hello, I am impressed with the excellent content you have provided! 👍🏻 Could you tell me if it is complicated to get a license for mining in Dubai? Thx

@Crypto_mining_lab 3 ай бұрын

Email me through our website regarding mining license in the uae

@stevengabor3334 16 күн бұрын

20 degrees is a real "troublemaker" in case you often start/stop mining, is there any patch out there to fix this ???? 15 degrees

@Crypto_mining_lab 16 күн бұрын

try some of the after market firmwares such as Vinish , you can lower that mini to 10 C i think

@darrenjohnson9019 3 ай бұрын

Do you think you could add a 3rd miner?

@Crypto_mining_lab 3 ай бұрын

Only if you are in a cold location , otherwise it’s gonna be hard for the cooler to keep up with miners

@rodrigokapo33 4 ай бұрын

Hi!! What is the thermal equilibrium point? after hours of operation

@Crypto_mining_lab 4 ай бұрын

its not a static value , it will change based on many factors , how much heat the miner is generating , and you ambient temp , but as longas you keep your intlet fluid temp between 28 C to 40 C , and inlet inside the miner below 80 C the miner will run fine

@arielik00 2 ай бұрын

@Crypto_mining_lab it's interesting I have lianli radiator and when the water is above 35c the miner show red light .

@kappaxy1085 Ай бұрын

Hi, do you know how much energy this cooler requires?

@Crypto_mining_lab Ай бұрын

it doesn't require much energy compared to the miners them self , between the pump the fans you are looking at 300W consumption

@Baby-CEO 11 күн бұрын

Can it run on solar energy?

@Crypto_mining_lab 10 күн бұрын

yes absolutely

@michaelzimmerman5151 3 ай бұрын

Are the hydro miners 3 ph or single phase.

@Crypto_mining_lab 3 ай бұрын

all hydro miners run on 3 phase 380/415V 50/60Hz

@michaelzimmerman5151 3 ай бұрын

I dont know anyone with 3ph at there house. Is there a way to convert it over to single phase.

@ionescumihai3099 3 ай бұрын

Not relevant to many people. It is normal for it to run for 10 minutes at 15 degrees Celsius outside temperature as in your video. You must specify that everything depends on the outside temperature. I have exactly this configuration, but a huge cooler with a dissipation power of 100 Kw, and a pump of 100 L/m and when the outside temperature reaches 32 degrees Celsius it stops working. Asic reaches 90 degrees.

@Crypto_mining_lab 3 ай бұрын

You need to be more specific on your setup as well , you meyiihdd a 100kw dry cooler , a 100L/ M pump but you don’t mention anything number about the number of miners you have , because when you say you have same setup people will assume that you are running two miners with 100kw dry cooler and 100L/m flow pump which is completely incorrect

@ionescumihai3099 3 ай бұрын

@@Crypto_mining_lab As I specified, in the first message, the same configuration, i.e. fixed the same number of asic-s, and the same model. Now it's clear...?

@SBSS_- Ай бұрын

I have antminer s19 pro hydro 184 th is it normal for inlet temp is 66 and outlet is 55

@Crypto_mining_lab Ай бұрын

its not , you must have reversed the inlet and outlet piping , the inlet should be on the hasboards and outlet at the PSU

@SBSS_- Ай бұрын

Can you also tell me where is the inlet and outlet in the radiator maybe I reversed

@DaRaccoonCrypto 3 ай бұрын

Why so many stale shares. and so few accepted? Would have expected to see higher number of accepted than stale.

@Crypto_mining_lab 3 ай бұрын

This was done in China for your information all mining pools are banned in China , so the pools we used is a private pool , you can see the pool address used , that’s why

@DaRaccoonCrypto 3 ай бұрын

@@Crypto_mining_lab I did wonder about the IP in the stratum. Thanks for the info hash on!

@7777Tiago Ай бұрын

Hydro miners don't work without a radiator?

@Crypto_mining_lab Ай бұрын

yes they need some kind of system to dissipate the heat , so they needs a hydro cooling cabinet if you have many miners , or a small radiator if you have one or two units

@SBSS_- 2 ай бұрын

I am using same as your antminer and radiator but it barely can handle 1 miner

@Crypto_mining_lab 2 ай бұрын

When you say the same you mean similar , the cooling capacity on the radiator I was using is 15kw , and water pump flow is 25. L / min , so I’m sure you using something similar but not the same , that’s why you having overheating issue

@crisis3714 4 ай бұрын

the biggest problem is finding 416 volts to run that miner.

@Crypto_mining_lab 4 ай бұрын

True not everyone has access to three phase , but actually the miner will run on any three phase with 380V to 415 V it doesn’t have to be 415 V

@samankpgamage 2 ай бұрын

i live in a freezing country. i send 21 centigrade into my S21 335T but don't start mine it says, "ERROR_TEMP_TOO_HIGH: over max temp" Does anyone know why? 2024-04-20 12:12:08 water temp 21 ~ 22, stop. 2024-04-20 12:12:08 set UART baud to 115200 2024-04-20 12:12:16 Chain[0]: find 216 asic, times 0 2024-04-20 12:12:23 Chain[1]: find 216 asic, times 0 2024-04-20 12:12:31 Chain[2]: find 216 asic, times 0 2024-04-20 12:13:51 too hot water temperature pic temp 56 (min 56) 2024-04-20 12:13:51 ERROR_TEMP_TOO_HIGH: over max temp 2024-04-20 12:13:51 stop_mining: over max temp 2024-04-20 12:13:51 uninit_temp_info 2024-04-20 12:13:51 do not read temp anymore... 2024-04-20 12:13:51 uninit_asic_temp_vol_info 2024-04-20 12:13:51 do not read asic_temp_vol anymore... 2024-04-20 12:13:51 cancel thread 2024-04-20 12:13:51 ***power off hashboard***

@Crypto_mining_lab 2 ай бұрын

it will help a lot if you can send a full load after starting the miner you can email it to : info@crypomininglab.net

@samankpgamage 2 ай бұрын

@@Crypto_mining_lab your email not working