Very clever cheap solution . thank you guys. I hope you find more handy tips

congrats, you have successfully made what was essentially the prototype for the HSGI taco. BUT AT A FRACTION OF THE COST

I showed this to a bunch of guys in my unit (We're Infantry) and you solved a lot of our problems we had with those same magazine carrier's. Thank you brother!

as a cinematography student, I can say that the production quality of your videos is top notch. you guys should easily have 100k+ subs

3:26 is when the tutorial starts

Thanks for the tip. Just did this mod to my bungee mag pouch, saved some money and have the same feature of a fast mag pouch. Very underrated airsoft channel, hopefully you guys will get more attraction in the new year.

Hey guys awesome video. I just did this with one of my pouches. Although on the subject of kydex pouches so you guys can be aware of why they didn't properly work. First off, most kydex mag pouches are super tight because so many mags have different shapes. You are supposed to actually heat them up and then fit your mag inside. As they cool they form for your Mags. Secondly, they are really meant for real use, so the weight of the PC is a big part of how they work. If you aren't running training plates (5lbs+ per plate) you will lift up your PC, but if you have the weight it will give you more leverage on your pull. So if you heat them up and have some weight behind them the kydex pouches are phenomenal. If you still have them you might wanna give my advice a try so the investment isn't a complete loss. About the insert coming out of the pouch, its really a manufacture quality and retention at that point.

Man you guys deserve WAY more subscribers. You guys are so informative! Keep up the awesome work, it's only a matter of time before y'all's channel takes off.

Hey guys I Just whant to say that am I wery happy because this small airsoft KZfaq scene has got these two experts and I hope this Channel Will had 1 000 000 subscribers one Day and I have one request can you start making video twice a week because for my and other 1.1k of People One video per week is a bit. Your big fan Vedran OUT

This just might be the single most brilliant solution to our mag pouch needs. Well done.

Don’t know how I never saw this video before. This is perfect for what I’m needing awsome again guys 👍🏻

This is very helpful to me. I finally stepped up to the SSR15 DMR build to replace my cancer tactical gen 2 and got a chest rig I’ve been trying to properly set up

Probably the cheapest yet most beneficial tip I've come across! Playing airsoft, I had some pistol mag pouches with almost no retention and the bungee kept sliding off of the mags, so I was afraid of losing them. This solved my problem perfectly! It worked great, even tough the two pistol mag pouches were joined together :)

You guys deserve much higher ranking. 2 experts soon to be discovered By many more. Keep it up guys, you Rock 👍🏻🔥👌🏻

Pretty damn clever solution. I definitely like it. Great job fellas.

Great idea! Thank you!

Now that works better. I'll send back new ones today.

Thanks. I am going to try this.

Impressive how the best solutions are usually the simplest. Thanks, man. God bless you

Good job guys. Been doin this for years. Got the idea from ats. If you run it through the middle molle seam. Itll hold tighter. Atleast thats how i do it on my tac tailor triple mag pouch. Note that: the bungee is more susceptible to damage cause its in the open (ie if you get caught on a branch, etc.) but i also run a double bfg ten speed over it. Rarely put 2 extra mags in the bfg. But lies flat when not in use.

Amazing vid. Not to mention a awesome looking gun hanging in the back ground. Love the paint job on everything. Amazing

This is genius, well done guys. My pouches hold 4 MP5 images or 2 or 3 M4 mags. I've always used velcro flaps, which yes they make a noise, but when in action your gun is loaded, so once you've fired enough rounds to change mags under fire, the enemy typically have an idea you're there. If I switched to single mag pouches tgus would certainly be something I would do, but I tend to operate with 9 magazines usually as standard.

Simple, cost free and effective - You got to love it :)

Thanks. This helped a lot in making my double mag pouches hold my mags better in place

Wooooooow!!!!!! Thanks for making this super simple mod known since I have tried to make up my own plastic inserts to no good success. I will be saving money over spending a bunch. THANKS FOR THE ADVICE!

Great help. Hope that during actual combat it doesn't fall when crawling. Good job! Appreciate the new idea.

Brilliant. Thanks a lot for this!

Awesome video bros!

Great video. Very good trick

Cool mod. Thanks.

omg this is nice i am going to do this to my pouches. thanks guys

wow that's smart thank you, gonna try it for sure

Great tip. Thnx !

Great helpful video. Thanks 👍

Older video but only just watched this today. Already converted all my mag pouches this way and I'm in love. I be to lazy sometimes to buy the real good stuff. And broke lol

soooo good i watch now like more than an hour to find a good vid for moding my bungee pouch and HEAR IT ISSS !!!!! THX

Clever cheap solution, thanks

Niiiice tip! Thank you guys!

God I love this video. I show this to my infantry boys. Good man.

Very good hack, thanks

kill it with the tips! cheers

Good info

If you have a flap pouch with velcro instead tuck in the flap its really simple and holds mags well

Awesome!

About to take this one now for all 4 of my mag pouches! Great tutorial, and an awesome solution. Now I don't have to buy the Tacos! Thanks for putting this out there!

damn your smart AF, why haven't I thought of this! great work!

Ik ga dit zeker proberen! Thanks!:))

This is even a better solution than buying fastmags! With this you can decide what type of mag you need based on the scenario. I was going to buy fastmags from TT but now i think i will buy the bunge ones and change them to fastmags whenever i need. You just increased the modularity of TT products. They should pay you :D

Well you just saved me a few hundred dollars thank brother

I tested it out. 1. My cords were too short to do it like in your video. So I didn’t do that last threading, and they were still a little too short 2. Yes, I got it to hold a loaded mag but after trying to fine tune it putting it back in; it was difficult because the fabric was bunched up. If I had a longer cord and a clip like y’all do, I can see it working.

very good solution, but i tried this on condor mag pouches and it didn't worked out at all as intended cuz condor pouches are way softer than your tasmanian tiger pouches

Hello! Do you think this could work on triple mag pouches as well? Maybe linking the middle ones together and the extremities to the back molle? If anyone as done it I'm waiting to hear about it. Cheers!

I'm looking into kydex rather than elastic retention just to keep things sleek. Would there be any problems with importing Esstac Kywis into Belgium if you wanted to?

Will this work for the pouches that have a pistol pouch attached on the front?

What kind of clips are those again?

can u use these to fit ak mags ??

That's great that more affordable way to taco pouches.

is it possible to do this on a triple mag pouch? and if so can we get a tutorial since that is one of the most popular mag pouch formats. the one in this video is too fast to see clearly what you are doing even on 0.5x speed

Hey, does anybode here know, if this will work for different mag-sizes? I want to build a chestrig which can hold G36 and M4 Mags - do the larger G36 pouches still hold m4 mags with this mod?? I know i could use the TT - fast mag pouch, but i want to have 5 rows of molle on the outside, so i can still mount an admin pouch infront of my mags. And any "fast - pouch" only has 4 rows, so i thought this trick could be the solution. would be greatly appreciated if someone shares his experiences. :) edit: the g36 mags are "cleaned" so those connectors are gone

what size of shock cord are you guys using? I'm looking at 1/8 inch but I'd like to be certain

Do they mag fast mag holders for belt set ups that fit galil 556 rock and lock mags

How can you do it with a triple molle mag pouch? Thanks

Damn imma do this now

Where can i buy this inserts?

Can you give me a link to the plate carrier and those pouches you're wearing in the video?

How can I do that with a vest that has them built into it? I can’t take my pouches off 😩

Is there a similar way for Mag pouches that are sewn together?

You only show how to do it with a single mag holder, but I see you have it set up for 2 on the left, your right. How do we do it for three and two connected mag holders?

Would you say this modded mag pouch is better/more efficient than a purpose made fastmag pouch, you showed at 4:52?

How did you tie the double one!?

do they fit ak74 mags after the modification

Can you do this on triple mag pouches?

I have double mag pouches. Can this still work?

Looks like a great mod. Is there a way to do it for the pouches that are joined to each other as a triple?

How to do like this with my triple bungee magazine?

Cool but i have a triple mag pouch and yea i can't aplicate that

what brand is the mag pouch?

Fuck that's clever! Really good tip! I would love a video showing how you do this but not in super speed! I know it's probably very easy but I'm not very used to do all of this stuff. Maybe you can upload the video you used for this video but in regular speed? Thank you either way!

Are those airsoft mags or real mags? I'm curious about the weight to retention ratio of airsoft vs real.

Is there a way to do this with in-built pouches? If so how? I can send you a photo of it if needed

You can heat up Kydex with a hair dryer to Lighten the Tension.

The problem is that I have three pouches stick together so i can't do this and now I don't know what to do. Can you help me?

What brand pouch ?

Can this be done with a 6 mag m4 pouch

is there any way to do this on a triple mag pouch?

They never showed that the mags were loaded (which would be a lot heavier) when they did the shake test. Has anyone tested this with loaded mags???

Why did you put the most important part in fast motion..

Great video great tip. Here some advice... i got carried away looking at your skilked armswinging, pointing and what ever you wre doing there. It will improove your vids if you manage to get rid of that habit. Its contraproductive and distracting.

now do it with loaded mags ;)

holy shit go faster next time - good vid though - trying it now

Video starts at @3:20

3:35

Video was too fast to pay attention how you set it up… good thing KZfaq can slow the speed down

sadly for airsoft I use an ar mag pouch that has 3 sewn together

or just buy the elastic pouches edit: nevermind you cant put the mags back in

Need to do new video on how to tie pouch and don't fast forward the process this video is very hard to understand how to tie!!!!!

So, is this whole fake Russian accent supposed to be the new and improved FPSRussia?

What's the accent? Sounds slavic.

Will this work on a triple mag pouch

does this work with double mag pouches?