Hello everyone! Thank you all for all the love and support you've given to this tutorial series. At first I was a little scared to post these, but your kind words have inspired me to keep making more videos. I spend a lot of time and resources to make these tutorials be of high quality, and FREE of cost. In order to help me continue and improve the quality of these videos, you can subscribe to the channel's Patreon page for as a little as £1 a month, and you get access to more resources than you would for free here. If you're interested, follow: www.patreon.com/TEX_The_Experience Happy modelling!
@jesperst Жыл бұрын
I'm a Formula1 engineer (working on the quality/inspection side of things) but I used to work with SolidWorks years ago. Recently decided to go back to design as a hobby and start refreshing my knowledge, for obvious price related reasons I chose Fusion. Then I found your tutorial. This is brilliant mate, I cannot wait to get through all of them! Well done and keep up with the great work!
@TEXDesignEngineering Жыл бұрын
Hey! Thanks for your kind words. Really appreciate them :) glad you found some time for your hobby and I'm happy I could be of some service to you. Enjoy!
@siddharthcamarushy67573 жыл бұрын
Never ever knew how much there is to 3d modelling in softwares before I saw this! Loving how intricately explained the whole preparation and process is. I can't wait to try this out once I can! Always looking forward to the next tutorials!💥🤩
@TEXDesignEngineering3 жыл бұрын
As always, a pleasure reading your comments. Yes, at first it may seem scary but trust me it gets realllyyy nice once you start. Let me know once you've tried it out!
@TEXDesignEngineering3 жыл бұрын
Do share your thought if you've tried out this tutorial! If you feel like I'm going over a little fast, try the following: 1) Slow the video down in the Settings > Playback Speed > 0.75 or 0.5. 2) Turn on CC! I've always found that turning on subtitles helps me a lot. When I follow tutorials, I usually watch each step multiple times if I don't understand it. As always, the best way to understand it is to try it out yourself! Feel free to ask questions in the comment section.
@terrynaumann97013 жыл бұрын
Love the videos! The Fusion 360 community keeps amazing me more every day. You have certainly expanded my skill set by introducing alternative ways to produce and shape/bodies. You’re a fine mentor, keep up the great work!
@TEXDesignEngineering3 жыл бұрын
That's so amazing to hear Terry! Thanks a lot for your kind words :)
@syedayaanalizaidi74394 ай бұрын
MAN!! Thanks so much for providing all the resources on your website for free and organizing them. I'm not an Aerospace engineer but I'm a curious learner this is just Goldmine for me as I will be able to follow you and produce an exact replica of the aircraft. That's SUPER and I am fired Up to make this model. Thanks a lot!!. I just have one request If you ever have time and I know you are not a Marine engineer but if you could try to model a Container ship from start to finish that would be extremely sick. I love ships but there's nobody on KZfaq who has modeled a full ship. I hope you're having a good day! Wishing you the best in Life.
@Justaplanebuilder8 ай бұрын
Just created a Lockheed PV-1 following this tutorial. Thank you so much for all these amazing videos you’ve produced. 🙏
@shankalpshany34713 жыл бұрын
I have been searching this for months....Finally got it...Thanku for this mate🙌
@TEXDesignEngineering3 жыл бұрын
No worries at all Shankalp, let me know if you have any problems/ things you'd like to discuss :)
@one.darkstar2 жыл бұрын
Great thorough explanation, sir. There are many channels who model aircraft, vehicles, weapons etc and so on but almost everyone timelapses their video and adds some music to the background, and that's it. It almost never helps to follow along and model. But yours, though...I'm very, very thankful to you and will try the model as soon as I get to my laptop.
@TEXDesignEngineering2 жыл бұрын
You're very kind Bhanu, hopefully the process is going well now. I've seen your comments on my other videos so I'm assuming you've started already?
@one.darkstar2 жыл бұрын
@@TEXDesignEngineering Yes! Now I have to make the engines, which I will as soon as these exams and assignments are over.. and one more thing, you're a superb youtuber because you reply and care for the commenters. It's a great thing. You deserve so many more subscribers !
@simonatkinson54913 жыл бұрын
I can't believe you don't have a thousand subs yet.
Greetings and thanks from Istanbul. Thank you very much for the clear, fluent and explanatory work. It was an enlightening and stimulating lesson.
@TEXDesignEngineering2 жыл бұрын
Hey Ayhan! Thanks a lot for your kind words, glad you found it useful! Have a great day :)
@victoroluwayemi95313 ай бұрын
Thank you for the tutorial 😁
@nomadkiwi3 жыл бұрын
I have just found your tutorials now. I am pretty new to Fusion 360 but you made this so easy to follow and the outcome of this was fantastic!
@TEXDesignEngineering2 жыл бұрын
Thanks for sharing that Kiwi! What are you working on now?
@nomadkiwi2 жыл бұрын
@@TEXDesignEngineering I think I am going to try follow through with your other tutorial here over the next little while. Its a daunting program, but your stuff really helps!!!
@johnmainville6512 Жыл бұрын
I would like to see the method to scale more accurately with the use of the rectangle. Thank you.
@russellw5447 Жыл бұрын
Hi Tex, Following your Tut's and making progress on my own project. You have a clear and easy to follow teaching style. Keep it up Thanks.
@TEXDesignEngineering Жыл бұрын
Hey! Thanks a lot. What is your project? Have a great day :)
@gwalk553 жыл бұрын
Nice job, thanks for putting this tutorial together! I look forward to viewing the rest of the videos.
@TEXDesignEngineering3 жыл бұрын
Thanks a lot Greg - Fuselage video uploading tomorrow! Let me know how you find it :)
@efsaervaaydn56982 ай бұрын
Thank you it was amazing I want to continue this one.I love it it is funny🎉.Thank you because probably it might be my hobby
@TEXDesignEngineeringАй бұрын
Best of luck with it!
@edkeefe2 жыл бұрын
Right click on canvas and calibrate. Add correct dimension. It’s much quicker.
@TEXDesignEngineering2 жыл бұрын
Thanks for the tip Edmund!
@SupersonicCheeseburger3 жыл бұрын
Damnn Tej really needed this!!! Cheers bro
@TEXDesignEngineering3 жыл бұрын
Haha you're welcome! AVD or GDP now?
@nakul34243 жыл бұрын
Hey man this is really awesome! Just started this today and soo looking forward, went through Tutorial 1 very smoothly
@TEXDesignEngineering3 жыл бұрын
Thanks for the comment Nakul! Do reach out if you need anything.
Wow. I've been looking for this kind of training. Thank you and I will be following you the whole way! John
@TEXDesignEngineering Жыл бұрын
Thanks for your kind words on all my videos John!
@johnmainville6512 Жыл бұрын
@@TEXDesignEngineering You are welcome. I appreciate your hard work and commitment to growing your education in aviation.
@jolajeznach18543 жыл бұрын
Great tutorial ! Thank you!
@TEXDesignEngineering3 жыл бұрын
Thanks a lot Jola! Do give me a shout if you need anything :)
@chrisp36733 жыл бұрын
Thanks for sharing this tutorials with us. It's very helpful to me for planning my own rc turboprop plane with fusion 360!
@TEXDesignEngineering3 жыл бұрын
You're welcome Chris! Feel free to share your updates with us so I know how much it helped you :)
@chrisp36733 жыл бұрын
@@TEXDesignEngineering thanks, i will do so! I try to make a mold later on out of the finished body and engine cowlings
@TEXDesignEngineering3 жыл бұрын
@@chrisp3673 Sounds super cool! Best of luck :)
@user-xk6od7jc5n2 жыл бұрын
Thanks for such detailed explanation
@TEXDesignEngineering2 жыл бұрын
You're welcome :)
@johnmainville6512 Жыл бұрын
Thanks!
@TEXDesignEngineering Жыл бұрын
No problem!
@TripleMMusic3 жыл бұрын
WAH JI WAH MASTER JIIIIII 😮😮
@TEXDesignEngineering3 жыл бұрын
Thank you ji thank you
@0623kaboom3 жыл бұрын
thats what I was forgetting .... the calibration ...
@TEXDesignEngineering3 жыл бұрын
Hope it's working for you now!
@zack.ynwa17 ай бұрын
Hi, I may need some help because when I am zooming into the origin the it keeps going further away and the green line is horzontal, could I please get some help?
@emmanuelsab10953 жыл бұрын
it sounds good!
@TEXDesignEngineering3 жыл бұрын
Thank you! Do let me know if you've tried it out.
@emmanuelsab10953 жыл бұрын
@@TEXDesignEngineering i will see this video this we, but please for tne next video, do not forget to speak as slow as you can for non english speaking fluent people, like me......
@TEXDesignEngineering3 жыл бұрын
@@emmanuelsab1095 Oh I'm sorry to hear that :( Unfortunately I've already recorded most of the videos. There's a way around it, if you want: 1) Slow the video down in the Settings > Playback Speed > 0.75 or 0.5. 2) Turn on CC! I've always found that turning on subtitles helps me a lot. Try both and let me know!
@KILLA_DDEE Жыл бұрын
PLs do a tutorial on how to crop them
@Fogaca1353 жыл бұрын
Impressive tutorial!
@TEXDesignEngineering3 жыл бұрын
Thank you so much!
@outdoorsxpedicion97252 жыл бұрын
great series of videos muy buenos gracias....
@TEXDesignEngineering2 жыл бұрын
Thank you so much for your kind support :)
@victoroluwayemi95313 ай бұрын
What if I to design an imaginary aircraft without a blueprint, how do I go about it?
@marrakes802 Жыл бұрын
is this possible even if my blueprint only has a side and a top view?
@alanmcampbell Жыл бұрын
Hi, I would like to build the Lockheed Martin VLST, but the fuselage is not circular. how would I achieve this? Is it possible to use the box form?
@TEXDesignEngineering Жыл бұрын
Hey! You can have a look at what I've done with the Helicopter fuselage top and bottom. I did something where I had to create a different cross section and used that.
@oneguy99163 жыл бұрын
Hi, thanks for the tutorial, how do you move the camera while drawing a solid line? i can't do both at the same time
@TEXDesignEngineering3 жыл бұрын
Hi One Guy, are you using the touchpad or a mouse? If you're using a mouse, click the middle mouse button to pan around!
@BentRim9 ай бұрын
@@TEXDesignEngineering Thanks for taking the time to make this content. I am trying to teach myself F360 just a little at a time. Bits and pieces. Your videos are clear and easy to follow along. I too realized that I must need to use a mouse? I am using a new Macbook and have only used the touchpad. Can you reccomend a good mouse for F360 use?
@user-uz9pi4jg8r Жыл бұрын
In your description you had a link to the plae. Is it possible you can share it with me, I am using it for a school project. It would be very helpful.
@TEXDesignEngineering Жыл бұрын
Hey, please contact me using the "Contact Us" section on my website :)
@pewpews21462 жыл бұрын
At first I thought he said 38,000 meters I was like...uhh... thats a big plane.
@TEXDesignEngineering2 жыл бұрын
Haha! Wouldn't want a 38km long plane, that would look super scary!
@bourdouzbouharou51323 жыл бұрын
Nice thank u
@TEXDesignEngineering3 жыл бұрын
Nice you're welcome!
@pixelrabbit2613 жыл бұрын
Top stuff!
@TEXDesignEngineering3 жыл бұрын
Thanks for the top comment Pixel Rabbit :D
@user-zk7xg8bx7i9 ай бұрын
pls tell me they teach you how to do it in uni
@kseniaklimenko25983 жыл бұрын
wow!
@nigelsimkin59102 жыл бұрын
when creating your offset planes Ive noticed your values say -4.800E+4mm mine doesnt it just gives a normal mm value, how do I get it the same as yours as my offset planes "boxes" are tiny and still with the sketches, Thanks
@TEXDesignEngineering Жыл бұрын
Hey! I think it may be because of the unit measurements you're using. I think mine says that because I've been working in mm but scale is in meters
@mulengakatebe45492 жыл бұрын
💝
@TEXDesignEngineering2 жыл бұрын
Thanks a lot Mulenga!
@sotm2 Жыл бұрын
What photo editor do you use?? Couldn't understand what you said.
@TEXDesignEngineering Жыл бұрын
I use Adobe Photoshop. You can use any editor of your choice.
@drnugget8347 Жыл бұрын
Can Fusion 360 can be used as a "plan" to build our planes ? By that I mean that If I model a plane on Fusion 360, I will be able to build my plane irl ?
@TEXDesignEngineering Жыл бұрын
Yes ofcourse! I make a lot of models for clients who build these aircraft in real life. What do you want to build? :)
@drnugget8347 Жыл бұрын
@@TEXDesignEngineering well, it would be my own plane design that I started to draw on paper, so theres no fig plans that can be found on internet since it's my own design, but I can still send you the paper design if you want to
@hafizuddinmohdlowhim8426 Жыл бұрын
😎
@TEXDesignEngineering Жыл бұрын
😎😎
@pierre30363 жыл бұрын
Did you ever put a video together of importing an image onto a sketch as mentioned at 22m55s? If so can you point me to it? Thanks for another great video, learning lots from you.
@TEXDesignEngineering3 жыл бұрын
Hey Pierre, unfortunately I haven't. I can try doing that when I start the next video series - helicopters! Thanks for your lovely comment :)
@-mammy Жыл бұрын
When I'm trying to edit canvas ı can't see planes? 14:15
@-mammy Жыл бұрын
I don't know how but ı fixed it.
@TEXDesignEngineering Жыл бұрын
Love it when people find the solution to their own questions. Have a great day!
@sotm2 Жыл бұрын
Why don't you pick a scale that someone could really build from instead of full scale??? Like for a Radio Control model airplane!!!!!
@TEXDesignEngineering Жыл бұрын
This video isn't targeted specifically for RC models my friend. People use CAD models for all sorts of things, and some of them might need it in full scale. You can easily follow the tutorial with your own scales. Good luck!
@sotm2 Жыл бұрын
You do NOT need to make a sketch and a line to calibrate your drawing! You can just click two points on your drawing canvas!! Drawing the sketch and the line are just extra unessesary steps!
@TEXDesignEngineering Жыл бұрын
I agree! Drawing the sketches is just an optional step if you'd like to be a little more accurate, that's all. If it's an unnecessary step for you, please skip it.
@mtbeyker94047 ай бұрын
I think, tha drawing those extra lines is really helpful, because canvas calibrate tool does not snap on the 90⁰ angles as normal sketch lines do, thus you are able to calibrate canvases at right angles
@mtbeyker94047 ай бұрын
I think, tha drawing those extra lines is really helpful, because canvas calibrate tool does not snap on the 90⁰ angles as normal sketch lines do, thus you are able to calibrate canvases at right angles
@mtbeyker94047 ай бұрын
I think, tha drawing those extra lines is really helpful, because canvas calibrate tool does not snap on the 90⁰ angles as normal sketch lines do, thus you are able to calibrate canvases at right angles
@mtbeyker94047 ай бұрын
I think, tha drawing those extra lines is really helpful, because canvas calibrate tool does not snap on the 90⁰ angles as normal sketch lines do, thus you are able to calibrate canvases at right angles.