How To: Onewheel Pint X Tire Change

No video

How To: Onewheel Pint X Tire Change

Рет қаралды 28,884

Күн бұрын

Looking to get the most out of your Onewheel? Upgrading your tire can change the whole feel of your board.
Follow along as Kyle breaks down the Pint X tire change process and shares a few helpful tips and tricks as well.
Still have questions?? Leave them in the comments below.
Take it slow. You got this!
Kyle - @arnies_stoke_shack
www.StokeLifeS...
www.Carve-Crea...
Instagram - / carvecreative_
#onewheel #howto #pintx #tirechange
Tools Used:
T30 Bit ( for axle bolts): amzn.to/3cGCIv2
T20 bit (for main screws): amzn.to/3oXlX4a
Swivel-head wrench: amzn.to/3CRMlle
Digital Torque tool: amzn.to/3xkkngz
Gyroscopic screwdriver: amzn.to/30QXnd9
Vibra-tite thread locker gel: amzn.to/3CLDwcn
3M Adhesive remover: amzn.to/3xhSG8f
#1 Phillips bit: amzn.to/3r7Ir5h
Valve Core/Valve replacement tool: amzn.to/3xfZ2F6
Tire Spoon: amzn.to/3nIAmBR
Tire Containment Strap: 1wheelparts.co...

Пікірлер: 108

@rolandsylvain2561 2 жыл бұрын

I like the way you change the tyre keeping the board Assembled, without Removing the rails. The bucket trick is cool too. Thanks for the tuto.

@carvecreative 2 жыл бұрын

Thanks for watching Roland!

@lukeschmidt4680 2 жыл бұрын

I can tell that you are Australian by how you spell tire

@rolandsylvain2561 2 жыл бұрын

@@lukeschmidt4680 french actually 😜

@TheFloatLife 2 жыл бұрын

Hell yeah, Boys! Thanks for the instructional!

@carvecreative 2 жыл бұрын

Thanks for checking it out! 😍

@brooksmcmahon9149 2 жыл бұрын

That bucket trick - Pro tip for real!

@BrianSlawsonPhotography 2 жыл бұрын

This is an amazing video! I'd say after watching this video Im going to change my tire next time. But nope. I'd gonna call Kyle up and have him do it cuz he's the best.

@Imran-tn1mw 2 жыл бұрын

Commenting for the algorithm, great tutorial

@carvecreative 2 жыл бұрын

Thanks Imran! Appreciate the support!

@OverExposedPixels 2 жыл бұрын

Carve creative puts out the content!! Boom!! Sick vid fellas

@LBS-33-33 2 жыл бұрын

I'm going to have to get myself a torque wrench now. Good tip and sweet video all around!

@carvecreative 2 жыл бұрын

Thanks Casey! For me it just gives me peace of mind knowing that everything has been consistently tightened! If you check the description there’s the link for the one I got. It’s been real good to me so far!

@theone2be33 2 жыл бұрын

No. Don't this yourself! He's a fake and a fraud!

@pixel2plastic832 2 жыл бұрын

Excellent tutorial! Can't wait for my Burris treaded to come in and happy you went over what the torque spec was and keeping pressure off the tire to hopefully maintain a nice a alignment.🙌

@carvecreative 2 жыл бұрын

Thanks!

@theone2be33 2 жыл бұрын

Don't do this yourself! He's a fake and a fraud

@mugman100 2 жыл бұрын

Gotta love that 2 x 4 stomp! Nice vid cc

@indiemoto 2 жыл бұрын

That Dilloz explosion was epic 🤓🔥

@javi_1859 2 жыл бұрын

Changed my tire! Super excited to hop on and shred! ...but gotta wait for the juice to cure. Thank you for the tutorial! Hoosier treaded if you're curious.

@carvecreative 2 жыл бұрын

That’s awesome! Glad we could help!

@carvecreative 2 жыл бұрын

How do you like the Hoosier?

@javi_1859 2 жыл бұрын

Super cool! I'm enjoying it! Now I need to invest in a fender! 😆 The tires like "eat my dust!"

@SoulDagger 2 жыл бұрын

Nice! I just ordered a Hoosier treaded so I can have it ready when my stock tire fails. I have just over 1700 miles on the stock tire already.

@PoopTart3 2 жыл бұрын

Watched a few videos before this one and all of them completely dissembled the rails. I was confused because I have done a few XR changes and always keep the rails together like you have. Good to know it's the same on the pint. Nice tutorial 👍

@carvecreative 2 жыл бұрын

You got it!

@cyrilguer1115 2 жыл бұрын

Thanks for your great video. Just changed my Pint tire and your video helped tremendously!

@carvecreative 2 жыл бұрын

That’s awesome! So glad it helped my friend! Let us know if there’s any other videos you would like to see!

@Shadow_Men 2 жыл бұрын

Awesome! I’m choosing a tire replacement on my X. There isn’t much tire review on KZfaq, hoping you guys would make that content!

@carvecreative 2 жыл бұрын

My personal favorite is the Xtrarad tire from float life. It’s a slick tire. If you’re looking for a treaded tire the craft and ride treaded tire is an awesome tire!

@skydart542 7 ай бұрын

Thanks for the video man, couldn't of done it without it.

@WarmasterSidious 2 жыл бұрын

Excellent tutorial! Can you do a tutorial for battery removal / travel guide when air travel occurs?

@carvecreative 2 жыл бұрын

Thank you! Yeah I’ll add that to the list of how to videos. Thanks for the recommendation!

@TheAnimeist 2 жыл бұрын

Very nice instruction and technique. Only thing missing is the rubber hitting the road.

@carvecreative 2 жыл бұрын

Thank you! Plenty of footage to come!

@matix10104 2 жыл бұрын

Thanks for the vid. I've always set beads with the stem out. Not onewheels but motorcycle dirt bike etc. No stem set beads then install stem set pressure.

@troyvtuttle 2 жыл бұрын

Great video and walkthrough Kyle, would love to see more advanced walkthroughs as well! FOMF :-)

@carvecreative 2 жыл бұрын

Thank you! Definitely will have more stuff coming down the road!

@SnowyBlizzard Жыл бұрын

Man, the Burris tire looked a lot easier to get off than my Vega😳🤣

@masonjagat 2 жыл бұрын

Great 👍 video !! You explained everything perfect thanks for the video💯

@carvecreative 2 жыл бұрын

Glad we could help out!

@anthony3D 11 ай бұрын

Merci 🙂 👍

@PeanutButter_Pickles Жыл бұрын

Thank you so much

@carvecreative Жыл бұрын

You got it!

@dustinglowa1072 2 жыл бұрын

Paint marks from Burris actually don’t indicate valve stem placement, they are inspection marks at the factory and don’t actually need to be aligned.

@carvecreative 2 жыл бұрын

Thanks for the heads up Dustin! I was misinformed.

@GitDatPC 2 жыл бұрын

I was wondering about this from other videos as well. My new tire didn't have any dots so I just slapped it on wherever 🙂

@RtBA1000 2 жыл бұрын

In the motorcycle world, the stem goes opposite the paint mark, across the wheel, an indicator from manufacturing and helps with balancing the tire/ wheel.

@richevans2920 2 жыл бұрын

Can you please list all of the tools (exact name for reference)? Looks like a solid toolkit for all around OW adjustments, I’m digging it. 🤙🏼

@carvecreative 2 жыл бұрын

Yes! Give me a couple hours and when I get home I’ll add details and links to the video description for everyone!

@dustinglowa1072 2 жыл бұрын

T20 torx for footpads and bumpers T30 torx for axle bolts Philips #1 for harness covers on axle blocks Also highly suggest using impact driver on the axle bolts other wise they tend to break the t30 bits or strip out the head of the bolt.

@carvecreative 2 жыл бұрын

Just updated the description with a link to all the tools used. Hope it helps!

@stephmillano 2 жыл бұрын

How long does it take to hear the second tire bead

@carvecreative Жыл бұрын

Every tire is different and depends if you use a lubricant to help set it! Usually not too far behind the first though!

@kody7041 Ай бұрын

does the bms not freak out when the tire gets unplugged and replugged back in?

@christophq3326 Жыл бұрын

What are the power tools and name brand of the torque you used ?

@eekdestroy5329 2 жыл бұрын

Hey mate, a bit of a random question regarding the Pint: Do you happen to know whether the original Pint chargers (car, ultra) will work with the Pint X? Much appreciated.

@carvecreative 2 жыл бұрын

Yes they will! It takes twice as long to charge but they actually give you the standard pint charger when you purchase a pint x. Have a good one!

@estellahassrick3407 2 жыл бұрын

Nice! Is it the same process for the normal Pint? If not, what is done differently?

@carvecreative 2 жыл бұрын

Same process! Bumpers are different

@estellahassrick3407 2 жыл бұрын

@@carvecreative Awesome, thanks!

@thomasbjerregaard1080 2 жыл бұрын

Good video! But that bucket isn't going to help you in the off chance your tire explodes......well, maybe create a little extra plastic shrapnel to fly around 🤷🏼‍♂️

@carvecreative 2 жыл бұрын

Very true! Better than nothing though!

@avalanchecannon7911 Жыл бұрын

I want to replace the stock Pint X tire but doing this terrifies me.

@carvecreative Жыл бұрын

You got this!

@itsnotlevel2 2 жыл бұрын

You left out taking off the plates that hold the wheel axle in place two screws on each.... One on each side.

@EugeneMaynard 2 жыл бұрын

🙏🏾

@carvecreative 2 жыл бұрын

😍

@sky4eva 2 жыл бұрын

What is the tool you used to remove the axel bolts with a T30 bit? I tried everything from a drill driver to impact driver all failed me big time!

@AuRowe Жыл бұрын

Carve please respond to this, my allen t30 tool snapped

@jaysdetailing2627 2 жыл бұрын

When you remove the motor plugs/connectors do they just pull right off?

@keithallen3183 Ай бұрын

Spent an hour with metal tools, and dad came out to assist.. bent the tire bead that sits on the rim... watching you do this so easily is really frustrating.😢 I've had 35 seizures in 2 years, I get frustrated fast.😕

@baylormustaine983 11 ай бұрын

the bead sets a lot faster if you dont put the valve core in people

@craigkovatch7564 2 жыл бұрын

Oooo what is the name of the wrench attachment that lets you flip it around 180? 3:30

@Victor-rv8kc Жыл бұрын

Hi ! Nice video. Do you recommend the same torque setting to axle bolts on a GT ? Thanks 🙏🏽

@carvecreative Жыл бұрын

Yeah 20 ft lbs should be good!

@Victor-rv8kc Жыл бұрын

@@carvecreative Thanks. It’s an OEM setting or yours ?

@Victor-rv8kc Жыл бұрын

@@carvecreative I broke my titanium screw with your torque value 😞🥲

@carvecreative Жыл бұрын

@@Victor-rv8kc for real? I’m so sorry about that I’ve never had that issue at that setting…

@Victor-rv8kc Жыл бұрын

@@carvecreative Yes.. In the video you stop at 16… so go to 15 for me. 20 too hard..

@weezlearmy293 Жыл бұрын

Is it required to remove the valve core? Or is it possible to work around without the tool.

@carvecreative Жыл бұрын

You could just let all the air out of the tire!

@dagreekratking4694 Жыл бұрын

What do you do when you've broken 3 tips and 1 bolt won't come out?? I have a flat and an Enduro tire and I'm stuck at this dumbest bolt that won't budge Thanks Kyle

@carvecreative Жыл бұрын

Use a drill bit thats about as wide as shaft as the axel bolt. Drill the head off very carefully

@carvecreative Жыл бұрын

After that you can take off the rail and use a vice grip players to spin it out very carefully!

@dagreekratking4694 Жыл бұрын

@@carvecreative appreciate the help i was also told to use a soldering gun and heat up the loc tight and try breaking it loose that way. I ended up buying craft and rides tool set and new hardware if all fails im drilling it out but thanks again

@RIDE-o-REBELLION-o-FLOATCAST 2 жыл бұрын

Is changing the GT about the same process?

@carvecreative 2 жыл бұрын

Pretty much!

@Tang_Qiuyue 2 жыл бұрын

When you're showing us how to remove the tire with a board, on the second side we can see some red paint like stuff explode out... What is that?😅 I'm about to change my own wheel and I'm a tad nervous

@carvecreative 2 жыл бұрын

Haha! No worries! That is just tire sealant.

@changleon7441 Жыл бұрын

Hi, is 20 inch pound what you use for all hub bolts for all boards?

@carvecreative Жыл бұрын

Hello! 20 ft lbs is what use!

@thejunkmanlives 2 жыл бұрын

wait, i thought taking these things apart bricked them? or is that just the gt?

@carvecreative 2 жыл бұрын

That’s only the GT if you unhook the BmS

@thejunkmanlives 2 жыл бұрын

@@carvecreative really? knowing that helps a lot. Ive been wanting a ow for the last few summers but right as i was going to order an xr they announced the GT. but with all the negative reviews i didnt noe what to do. it was between hoping to find a decent used XR and maybe going for the pint x. knowing that the pint x is looking a lot better. thanks.

@AuRowe Жыл бұрын

Broken 5 T30 bits so far trying to get the damn axel bolts off. Using proprietary bolts like that (and TP45 for the GT😡) is some Apple-level nonsense

@carvecreative Жыл бұрын

You could always carefully drill off the head of the bolts, and then remove the rail afterwards. Once the rails removed, you can take a vice grip to spin the threaded part of the bolt out of the fixture.

@AuRowe Жыл бұрын

@@carvecreative Thanks for the response. I just bought a bunch of high quality bits so hopefully that works. I was using cheap bits and at least got 1 of the bolts loose. Thank you for the alternative solution if this still doesn't work!

@carvecreative Жыл бұрын

@@AuRowe here’s another tip. Put the board on its side. Center your weight over that wheel and carefully put downward force on the bolt as you’re spinning.