I was searching for this type of video for years and finally I found it. I am just student and I cannot afford mini drill also so it means I just need to buy 1 bit and that's all 😁 thankyou very much bro. I have also watched your all other videos and they were also soo much inspiring to me. Thankyou again and may God bless you.

currently i am restoring a ferrari FF, this helped

This makes me want to do custom cars I’m a hotwheels Collector

I noticed that some drill bits are either not wide enough, or too big on some vehicle's. I prefer to use screws to reassemble afterward. They look better.

This has been said already, but after watching just two of your videos I can't thank you enough for the content! This gives me some confidence in a future custom!

The cleanest way to remove rivets I've ever saw!

I wouldn't be mad if you had more tutorials like this. THANK YOU!

Finally someone that explains well!! Great job!!👍👍👏👏

I think I found the cheapest and cleanest video tutorial in youtube! Thanks man!

I always used JB Weld before but this works better because you can take it back apart later if you want to.

Best tutorial for beginners.👍

I use to work as aerospace production and we'd use this technique for removing faulty rivits

Can't wait to make my own custom HW car 🔥🔥

Hey, I guessed your flaming metalflake blue '67 Shelby GT-500 is your test car to opening up the rivets. Thanks a lot!

Love the tutorial,now it will be easy for those people that want to do it and follow it step by step perfectly, good to go and keep it up.

Thanks for the video it would be helpful to my old HotWheels

Thank you mate. I almost dill the base thanks mate

Thanks for your video s are so cool

Great video! Thank you!

Thank you for the tips in the video man thank you for sharing from California a huge hello for you

Thanks very helpful

Thank you.

Very detailed tutorial

Awesome! Thanks a lot!

This is just what i needed to see! Great video

Ty for showing makes me wanna do it to my hotwheels

Thanks, I'm remodeling some cars for the Gaslands tabletop, so I needed to know how to carefully remove the chassis for aging, painting and modding. I think I will be using superglue to reconnect, though.

Very helpful thank you

Exelent job Amigo.Thx a Million

This really helped me

Anyone have a good link to the bolts used to finish the car? Thanks.

THABK YOU SO MUCH! I'VE LOOKING FOR VIDEOS LIKE THIA BUT NONE OF THEM WERE GOOD, THIS IS AMAZING ITS GONNA HELP ME SO MUCH WHEN I WANT TO CUSTOMIZE MY FIRST HOT WHEEL! THANK YOU SO MUCH, YOU EARNED A SUB!!! 👍👍👍👍👍

Even though it's 2 years old, but still helpful for beginner like me :D

Very helpful

Yeahhhh. Thank you.

Finally!!!! Thanks Bro!!

Cool !

Cool👍👍👍👍

Nice

Only thing I would recommend is Dry Lube on the bits & the posts when tapping. There is a heat build up that can cause damage to the chassis (especially plastic), diecast post and the bits themselves. Use the oil it's a cleaner job.

Thnx I was wanting to repair my Chevrolet It has a dent

Thanks bro

Niiiiiiiice!!!!!!! 😊😊😊😊😊😊

I Really like Watching these videos They inspired me to do custom Hws and could you please do a custom Triumph TR6 or a Honda Civic SI

Finally someone who doesn't just squirt super glue in the rivet holes.

I have a couple of HW retro entertainment Deloreans...I'd like to get the rivets off so I can put screws in which would allow me personalisation to swap the chassis on the cars and get in them if I needed to...though I'd like a professional job done on them (not by an amateur like me) if I could pay someone for the work.

Hopefully this works. I have around 10 cars with bent axles and need to fix them. I have around 200 vehicles and have been collecting since I was 4. A decade later, I have A LOT of cars.

Awesome

I’ve just recently tried doing these steps but I feel like I’m doing something wrong. I’ve used the exact same tools and screws. After I drill using the 1.8 mm drill bit, the screws just seem to just go straight down. Meaning it doesn’t screw in or tighten. Any advice will help. Thanks.

I just have the 3.0mm drill bit so can i use it to open the rivet ?

Can this work with Tomica? I'm not completely sure about the size of Tomica rivets.

Very useful video! Thank you! I was wondering do you use mask while drilling?

What drill bit did you use for the locking pole?

I think commenting on your very first video won't be a way to receive an answer. But I think this is a video with best editing you've ever made so I just wanna ask that what software did you use to create those nice graphics and subscriptions?? Hope you will answer! And just want to say that I love your works and please keep doing them!!

Orayt!!,🤘, all videos are awesome, bro, may I ask, what kind of paint do you use?, for the body and details (lamps, etc), Tnx

Great video! Question: How come you use the 10 mm bolt to make threads and then the 6mm and not just use the 6mm screw right from the begining and be done?

Do you have any videos on how to do a widebody kit and stance and put new wheels on and all that stuff

Great tutorial, where do I purchase one of those manual drills?

👍👍

Makasih infonya

I have a question, I only have 3mm and 4mm drill bit. Which one from this two drill bits will you choose?

can you also use an electric drill for the 3.5mm part?

Does it have to be a 3.5 mm drill bit? And will a 3 mm drill bit work?

They should make them like this from factory. Even if it mean paying the full dollar for one

Hey tolle is the 1.8 drill bit the same as 5/64

Hey tolle my rivet ring snapped off when I was trying to take apart the car should I be worried?

Can you use rivets again to put the pieces back together? If so, what is the size of the rivet?

can I manually use 1.8mm drill bit? I dont have a machine like yours.

I need to customise some cars doing this.

Quite new to this. Can this process be also used for Tomica models?

Can i use 3.0 mm hand drill? Because i can not find and hand drill wth 3.5 mm drill bit

i feel like im doing smth wrong with the manual drill part, ive been twisting for a while but the rivets still remain locked any idea why?

Where did you get the drill? Can I just use an electric screw driver? Will it be enough to open the rivets? Thanks

At what drilling speed should I put my drill

Hey dude, I just only have 3mm electric drill. Can you tell me is it good enough to open the rivet?

Hey tolle is a 9/64 the same as a 3.5 drill bit?

is the rivot sizes same for all hotwheels?

Can we use 1.5mm or 2.0mm for drilling the hole for the bolt?

Where can I get these screws and are they called M2 screws or something else in the store?

how you weaken the rivet? Mine just hard to open it

you probably won't seee this but i was wondering where you got your screws from?

does this apply the same for other brands, for example the car im trying to open, a subie impreza wrx from majorette? im using a drill but if i find one, ill use a hand drill (skrewdriver lol) great video!

What supplies do you use to customize the hot wheels cars

Hey where did you get the bolts?

4:16 can i use screwdriver instead of a drill?

Hi Sir, if im using 1.5mm OR 2.0mm drill bit, still can use the 6mm bolts right?

How'd you make that drill bit screw driver?

Can i use 2.5 mm bit

can use1.5mm dill bit？

what is that screwdriver you using

What would it cost to do a car for somebody because your work is absolutely amazing. 🤯 Now I can't wait to do my own project.

Om itu bor mesin nya kuat buat unrivet ga ?? Kalo kuat harga sama belinya dimana ?

I'm guessing you don't need to tap the holes because the bolt metal is so much harder that the body metal it won't strip the thread.....

Are u drilling into it or out of it

Jadi buat dratnya lgs pakai baut ya. tidak perlu pakai hand tap untuk buat dratnya

I wish I could do the same things! I love cars!

Will this still work if the rivits are old?

What are m2 bolts?

For step two can't I use a hand drill?

It's possible to use 3.0mm drill bit? 2:51