😱How to open POCO X3 NFC / PRO and REPLACE BATTERY

Рет қаралды 74,501

2TECH

2 жыл бұрын

Did I helped you?
Buy me a coffee: www.buymeacoffee.com/tecnowiki

Пікірлер: 57

@jurgmesser9779 6 ай бұрын

Thanks for the video. I have one concern , though. Is T-7000 glue still soft/flexible when cured? I googled T-7000 and it says it is black epoxy resin. Epoxy resin is permanent and hard, so that you can never open the phone again afterwards. Is this true or are there different types of T-7000 glue?

@muhamedbaravi3773 9 ай бұрын

Thanks man for video , was helpful

@idlannaim339 6 ай бұрын

hi my phone got damaged after falling. I want to fix it myself. where can i buy phone back cover opener?

@Sark2137 Жыл бұрын

Very good tutorial, thanks.

@STILL_SL 9 ай бұрын

Thank you!

@Mark-gt4xg Жыл бұрын

What kind of screw used in that phone so Ill go buy some tools fpr that before opening my device.

@2TECH Жыл бұрын

you will need a 1.5 phillip screwdriver and some pieces of plastic, the same that was used in Xrays, you can use alcohol or heat from a blower

@user-yv2005 4 ай бұрын

Kitna amount lage ga chnge me battery?

@arifnorazhan1015 Жыл бұрын

No need to glue at their camera's area? How long should I wait after glued it?

@2TECH Жыл бұрын

No need to glue camera area, if you use T7000 I recommend 3 hours, but if you are desesperated you can do it in 2 or 1 hour.

@arifnorazhan1015 Жыл бұрын

@@2TECH what about the excess glue that oozes out? should i wipe it? or wait until the glue dries

@EggsiLog22 Жыл бұрын

Where can I purchase the original xiaomi bn57 battery?

@mahammadgamer3450 14 күн бұрын

I bought a battery from Ali Express and installed it a while ago. I noticed a good difference since my device had not been opened or the battery changed before.

@garicenteno2305 9 ай бұрын

Deberías quitar el fex del centro de carga para no dañarlo

@johnsr-sr111kz 11 ай бұрын

Price?

@sambhuchampramary3220 Жыл бұрын

Thanks

@dudestyle01 Жыл бұрын

Awesome video... My Poco is only running at 80% according to Accu Battery 🔋 app... My Poco is still mint condition and I don't want a new phone... I now know I can keep it 🙏

@2TECH Жыл бұрын

Great 👍

@ll3yWanTeD Жыл бұрын

Same here i still want my poco f2 pro until it lasts!!

@CEPLOSX Жыл бұрын

can poco x3 pro use 6000mAh battery? the original factory version use 5000mAh battery😬.. have you tested it out?

@2TECH Жыл бұрын

Never tested it before, the problem is not the extra 1000mah because it will just take a little bit to charge or discharge.. not a big deal, the big deal is if it fits inside the same place or you need a new bigger back door.

@a.v.9561 9 ай бұрын

U can use 6000! It work.

@user-vx6fc5fs3b 6 ай бұрын

Vai atR price kt the pare❤❤

@markhoward52 Жыл бұрын

What's the pad that the phone is on ?

@2TECH Жыл бұрын

I don´t understand you.

@user-ip9bu1gq9c Ай бұрын

How about not charging

@mohddzulkifly3378 11 ай бұрын

Nice

@Ghost-hc2wn 9 ай бұрын

Can the poco x3 pro battery, which comes with a capacity of 5160, be changed with the poco x3, with a capacity of 6000? And install it on poco x3 pro

@KurozawaSecond 9 ай бұрын

Yea same question here and can the display also be replaced with amoled? (Poco x3 pro)

@lightningboltyt8315 8 ай бұрын

@@KurozawaSecondu better not try these things

@saini88 6 ай бұрын

Yes you can.

@seanriley199 5 ай бұрын

Do you lose any data? I have passwords and photos I'd like to keep but can't transfer them off

@ramonedrozojr.768 5 ай бұрын

no, it's just the power supply

@seanriley199 5 ай бұрын

@@ramonedrozojr.768thanks for the reply, my mind is at peace now, thank you

@okan931 6 ай бұрын

Thank god i don't need to remove the screen

@weixiangcheok6453 9 ай бұрын

My phone unable to charge after changing new battery. Is it because I place the sticker wrongly?

@wearefromserbia9714 7 ай бұрын

Did you solve it?

@iamshidvlog1112 11 ай бұрын

San po Kong bumili Ng battery Nyan?

@dimlight7285 Жыл бұрын

Niceee

@2TECH Жыл бұрын

Thanks 🤗

@VarietyGamerChannel Жыл бұрын

Well changed the battery easily, turns on but screen is now dead, no boot just background noises as if it is actually running even message notification sounds. Screen is 100% fucked. Edit: I damaged the screen connector when removing one of the screws which was hidden by sticker. Phone is kill.

@2TECH Жыл бұрын

Hi, did you punch it with the screwdriver? In this video i never touch screen connector or flex :(

@2TECH Жыл бұрын

@@andyacevedo237 Claro que puedes!!! Para hacerlo no necesitas mucha experiencia sino PACIENCIA Y LUZ, un pedazo de radiografía, un poco de alcohol, un destornillador pequeño y una batería nueva. Me puedes también seguir en @tecnowiki01.

@ll3yWanTeD Жыл бұрын

Lol my bad :/ that socks.

@zemogaming395 11 ай бұрын

Where to buy legit battery

@touhami_dz6458 3 ай бұрын

after doing this any water can harm the phone ?

@Simon-jh1hf Ай бұрын

yes, unless you put new glue on it before you put it back together

@touhami_dz6458 29 күн бұрын

@@Simon-jh1hf thank you

@caponych Жыл бұрын

How to remove excessive glue from seams?

@2TECH Жыл бұрын

Use dry cloth

@rekt.s 10 ай бұрын

Where to get battery?

@2TECH 10 ай бұрын

ebay

@vodopad27 7 күн бұрын

So hard... I am retard, I have to buy new phone, LOL. I love my Poco x3 NFC< but i can not replace by myself XD.

@2TECH 5 күн бұрын

Is so easy.... I know that you can do it, with calm, a plastic card and alcohol, im very very very sure!!

@Simon-jh1hf Ай бұрын

no chance, I can't get it open lol.

@2TECH 26 күн бұрын

Is soo easy :D

@Simon-jh1hf 26 күн бұрын

@@2TECH yes with a suitable heat source. I first had to order one and now wait 3 weeks for it^^I will never use a heat mat like that again, so I decided to use a temperature-controlled hot air gun, I somehow have more use for it