Рет қаралды 1,114
When buying a heating cable for a water supply system, many people think that since it is self-regulating, it will turn itself on and off by plugging it into an outlet. But this is not the case! In order to save energy, and not to heat cold water, a controller with a temperature sensor is needed, which is attached to the pipe. In connection with this problem, I decided to make a video of how to install such a controller.
This requires the following materials:
Small metal shield 380 rub.
Digital LCD temperature controller thermostat STC-1000 with NTC temperature sensor 1000 rub.
Wire PUgv 1x1.5 1m. RUB 25
NSHVI handpieces 6 pcs. RUB 10
IEK C2A submachine gun 380 rubles.
Zero tire 320 rub.
Din-rail 30 rubles.
Self-tapping screws 4.5x25 6 pcs. RUB 10
Contacts for communication:
Telegram chat of the warm house channel: t.me/joinchat/HeA9BBrjNJ2Doqn...
Yandex Ether yandex.ru/efir/?stream_active...
Telephone for communication in St. Petersburg (Moscow time): +7 951 6742 777