How to: Paint a Scale Model with Spray cans Part 2: Color

Рет қаралды 585,591

8 жыл бұрын

Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by KZfaq Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

Пікірлер: 363

@superj767 5 жыл бұрын

When I use rattle spray cans, I will place it in a small container of warm water, I find it helps the paint flow on the model. With that technique, i never have to polish the paint and it reduce the orange peel texture that you get with painting

@hungryhoss1379 Жыл бұрын

Very cool tip my man…thank you

@stevejacobs8375 11 ай бұрын

Me too.... That's a great tip !

@bendude6748 4 жыл бұрын

Thinking of having a go at my first model car, never tried anything like this before and now I'm realising theres a fair bit more stuff I need than just buying the model in a box lol..

@AussieGunzel 2 жыл бұрын

Just get a simple starter set to get an idea if you’re thinking so, there’s plenty by revell.

@jeffallen5871 5 ай бұрын

Unless you plan on entering a model show/contest, I wouldn’t worry too much about all these techniques. I rarely build models myself, so I just “spray and go”. My few models don’t have that “showroom shine”, but for just my admiration, I’m satisfied with them. If anything, I personally focus more on the engines and interiors looking fantastic than I do the outside.

@afenijmeijer9027 4 жыл бұрын

My experience with Tamiya rattlecans is that you must let them dry for at least 72 hours before applying masking tape. I have had a couple of disasters by applying masking tape sooner. The paint underneath develops wrinkles which requires restarting!

@leighton_lam 3 жыл бұрын

Thanks for the tip!

@kevinolive354 3 жыл бұрын

I have had the same problem. I think it’s because the primer isn’t completely cured so the paint takes way longer to cure. In the future I will allow the primer to cure 48 hours before I begin painting with color. Hopefully that solves the problem.

@gut6 8 жыл бұрын

You are trully pasionate, putting so much work to paint one black line. Respect!

@angi1549 5 жыл бұрын

@Wheatexe 5 жыл бұрын

@bakeryamaker1025 5 жыл бұрын

@pg1171 5 жыл бұрын

That's the way to go if you want it perfect!

@danielclark8206 5 жыл бұрын

Just found this on youtube. Really brings back memories. Used, then, little bottles of paints or a set. I still have some scale plastic models from childhood. AMT Revell... Still in box, needing to be assembled. Big deal with kids in the 60s

@pg1171 5 жыл бұрын

OMG! I remember those! I probably had a few. I started building around 6 or 7 yo. That was about 1970-71. I remember all of the old AMT, Revelle, Monogram, Aurora, MPC, Lindberg, and a couple others. I started out on what I think were MPC Waterline WWII snap together, ships. I wish those were still around. They were simple and still looked good, even without paint. One of my first painted models was an old Frankenstien/Graveyard model. Painted the grass on the grave plain green, and the headstone and foot markers were silver. Don't know what I was thinking....LOL! Aparently I wasn't going for accuracy at such a young age. Nowdays I'm all for being as accurate as possible, when I get into the mood to build something...smh...

@jaysonjota 5 жыл бұрын

The music made me feel like I was in a vanilla sky dream. Nice vid

@flonkas 3 жыл бұрын

Jason I feel u dawg even 1 year later. Trippy shit

@k2bny 4 жыл бұрын

Can't believe I made so many simple mistakes in the past. Thanks for this. Now I know where I went wrong

@skysupras4530 6 жыл бұрын

Great vid! Currently doing a fujimi R32 and this video helped a lot thanks for the great tips!

@loumenzies2210 5 жыл бұрын

Thanks for the tip! I'm going to be stripping and repainting/customising a 1:18 scale E-Type Jaguar fairly soon, and since I've just got into modelling, I wasn't a 100% sure on the best way to go with my project, but thanks to your video, and your channel, I now have an idea of the best way to move forward!

@J4C08G4M3R 5 жыл бұрын

I've just dismantled and sanded and primed body of a jag I brought from a charity shop, it was a bit battered so stripped and primed it ready for a new paint job

@andrewscott2090 7 жыл бұрын

love putting together models and these tips are great. thank you

@donnasbrushedart8325 6 жыл бұрын

You make everything look so easy!

@benner1877 4 жыл бұрын

Great videos really helped me with painting my first body !!

@Toppervision1 8 жыл бұрын

You sure do nice work. Remasking for the black line instead of freehand painting was the right way to go. Oh, how I've made this lazy mistake. I sure like that gunmetal color. I'd like to see a whole car painted with it. Thanks for the video!

@ericgroundhog 5 жыл бұрын

I am building a Hubley Duesenberg the body/chassis/and a lot of parts are made of metal. I have gotten advice from my brother in law who has decades of experience building plastic car kits. I've filed away flashing and excess metal, washed it twice, and primed it with Gray Rustoleum. It's been sanded with 1500 grit wet/dry sandpaper, washed again and wiped off after drying with microfiber cloth. Ed has said that I should let all color coats cure for 2 to 3 weeks. That gives me time to attend to the plastic parts. Like you, I am using Tamiya spray paint.Try a metal kit my friend. It's a heck of a challenge. I'm planning on 1 1/2 years to complete.

@rickzinck9326 8 жыл бұрын

Very informative video. A lot of good masking tips. Thanks.

@Malacaco 8 жыл бұрын

Since I'm very experienced with Tamiya spray cans, I couldn't avoid a big smile in my face when you were painting the black stripe and when you think you're pointing the nozzle in the right direction, you realize you've just painted a whole finger; happens to me very often. Happy to see it's not just me :)

@Homerlovesbeer2 8 жыл бұрын

lol been there done that!

@biglou9662 8 жыл бұрын

You've did a fantastic job!

@srgears7418 5 жыл бұрын

Excellent tuto man! very useful

@hazmat5118 Жыл бұрын

Thanks for sharing your approach and tips - i feel more confident that spray cans can give a good result, probably far better than brushed which is what I'm used to using.

@lignecourb6387 Ай бұрын

Bonjour. En utilisant la technique du tamponnage au pinceau, on a pas de perte de peinture, et le résultat est aussi bon qu'avec une bombe ou un aerographe. Cordialement.

@jasonperkins8038 3 жыл бұрын

This video makes my buzz better thanks bro

@connersewer1615 5 жыл бұрын

I have always lightly ran a new exacto blade along paint edges before unmasking! bit of a habit probably from years ago lifting a set of tape from candy full sized car that I flamed and blended, destroyed around two weeks worth of work, so yeah same here, I don't want to do it twice so better safe than sorry on my part! built a lot of models back in the 60;s as a kid, now retired and getting back into it!

@PaulGaither 4 жыл бұрын

I like to customize my toys, so this helps so much.

@Rohaku216 2 жыл бұрын

You might wanna try the purple tape, the glue on it is much less sticky compared to the yellow one. We use this at work for to mask off fresh paint. Keep up the awesome videos I really like them, I just started model building

@ditched_the_load 8 жыл бұрын

+ The Scalemodeling chanel another awesome looking build, your videos have given me the confidence to start doing my own builds. Just a quick one for you, I noticed when you sprayed the black it was a bit "blobby" , do you warm your cans in warm water before use? It's just a small trick from painting lexan bodies for years and helps thin the paint and spray finer.

@garybrounstein7725 5 жыл бұрын

It was never addressed how you could apply so many initial coats over & over again at one pass & not risk having the paint run. I’ll admit I used auto cans of spray paint & not Tamiya which is known to have a more fine spray, but still trying to be careful of not over spraying. Any response would be helpful.

@williamcarter347 5 жыл бұрын

This is so relaxing when you’re stoned af 💨 Great video.

@MetalGear_Markie 4 жыл бұрын

Carmelo Lopez yuppppp

@markgobuffalo6490 3 жыл бұрын

I tried to blow sanding dust off my ipad in first vid. Lol

@Fgjjhvv 3 жыл бұрын

@@neilpirelli9240 ?

@spencergittins1515 3 жыл бұрын

That sound at 4:13 was so satisfying

@biglou9662 8 жыл бұрын

I've done the same thing like what you did with a two tone colors on my last Tamiya Toyota soarer 3.0 GT Ltd model built. Lol

@timdodd3897 2 жыл бұрын

I just bought that Tamiya turntable. Nice videos.

@ponymoore6140 4 жыл бұрын

I'm impressed. Lots of patience with masking. I would however use an airbrush with a fine needle for the black stripe, which would reduce on amount of masking needed

@dwrutsgnt4225 3 жыл бұрын

Nice job! I have lots to learn

@pg1171 5 жыл бұрын

Pretty good job. You forgot to state one thing. Shake the can occasionally to keep the paint mixed evenly. It doesn't matter what kind of paint you use, or the temperature, ALWAYS keep your spray paint shaken, to keep it mixed. I've been doing this for over 40 years. Take my word for it. Otherwise, great job! Good recommendations! I also mask off the inside, to keep from overspray. Great job! Thank you! PS-glad to see you using an airbox, and gloves. Hopefully a mask too...always good to pass on good tips. Thanks again!

@cdjhyoung 5 жыл бұрын

A second hint on using shaker can paints, if you are using gloss paints, warm the can in hot tap water before using. This helps to thin the paint and adds to the spray pressure. I find I get a much finer coat of paint doing this first. You are only trying to raise the temperature of the paint from room temperature to about 106 degrees F.

@pg1171 5 жыл бұрын

Great idea!

@vdxmonv_3958 2 жыл бұрын

Frog tape works wonders, they have different grades of tape. Worth a shot to check it out!

@BryceandKyle 8 жыл бұрын

Doing it right with the two tone! Guessing it's the KG1/463 two-tone (Best two tone). Wish I could have found a non-trashed two tone S13.

@paceta80 4 жыл бұрын

That's gorgeous

@OgGrande113 5 жыл бұрын

Hello love your work I have a quick question how do I remove coats of clear I was trying this new clear but differently not a winner now I have way too much over clear on my car can you help me with out ruining the paint thanks in advance

@carlosjesus-miniaturas 3 жыл бұрын

I am also a creator of pre-analyzed miniatures and I try to improve the techniques by seeing other works like yours very good without a doubt.

@3Dsjk 8 жыл бұрын

For the Americans, try the yellow FrogTape for Delicate Surfaces. It looks and feels just like Tamiya tape.

@pierceyu4546 6 жыл бұрын

Is the masking tape you can buy on hardwares good to use for thw curing paint?

@scottrider8445 5 жыл бұрын

Getting a huge Deftones vibe from your background music. Wasn't expecting that.

@mitchgawlik1175 7 жыл бұрын

I was a little surprised at the relatively short bursts of laying down color as opposed to long, even coats. For a while I had the good fortune of having a pro painter friend do my cars. That option is no longer available to me and I'm starting up my hobby again by having to go to spray cans, so that's why I've been paying close attention to your videos.

@beegyobby576 4 жыл бұрын

I was struggling on whether I could paint small details and lines with a spray can, but now it doesn't look so hard.

@qthenz 7 жыл бұрын

how did you remove the wind shields and what size do you use for taping?

@arrrgee 8 жыл бұрын

Really nice demo on using Tamiya spray cans, you must get through a lot of masking tape!

@j0hnnykn0xv1lle 6 жыл бұрын

your spray technique is interesting - short bursts, i've not seen that before.

@MagneticPizzazz 4 жыл бұрын

I wanna repaint the front and back bumpers of the 1:18 Chevy caprice white, is this how I go at it?

@patricka3723 8 жыл бұрын

Looks Nice.

@Wesley_C 4 жыл бұрын

It's just in a best way to prime and paint that base color of the body.

@w.a.l.7259 6 жыл бұрын

Low quality tools, high quality product👌 cheers mate!

@ewilloch 5 жыл бұрын

angus L. I don‘t see a single low quality tool in the video? If you mean the Tamiya sprays, you have obviously not tried them or used them incorrectly.

@light-sg1413 2 жыл бұрын

Hi love the video just wounding the vinyl tape you use what Millimetre is it as i am working on a pontiac trans am at this time

@stevencreiter5763 5 жыл бұрын

Nice Job. Tell me about the tapes and the paper that you used. Video went so fast,I could not make it out. Why re mask the interior with every newe coat of paint?

@biglou9662 8 жыл бұрын

For the black mold outlines, I used Tamiya semi gloss black to look more realistic.

@kevinaylesbury3657 5 жыл бұрын

Hey mate love your vids mate I was wondering how u would apply the chrome body stripping to a car I would really appreciate your help I got a Volkswagen Beetle 1/35 scale but haven’t built it yet because of this reason thank you mate sorry to bother you with this thank you for sharing your knowledge and talent 👍

@TheScalemodelingChannel 5 жыл бұрын

Check the BMF how to on my channel ;)

@RDMash 2 жыл бұрын

What clear coat can I use so if I make a booboo while spraying stripes or like a blackout hood where it connects to body color etc., that I can polish out the blemish.

@eottoe2001 5 жыл бұрын

Do you have any concern for finger prints leaving oil on the paint job and interfering with the paint before the clear coat?

@brainjuice4381 4 жыл бұрын

Artistic Masking!

@cubdukat 4 жыл бұрын

What do you do when you have a model that's already colored and you want to keep the same shade? Tamiya makes a version of that Silvia in pearl-green, but I don't think that Tamiya makes that shade in a spray. As long as the body doesn't have any moulding marks, can you get away with just clearcoat?

@Kabul81 6 жыл бұрын

Tamiya rattle paint levels out pretty well!👍🏻 Jman👀

@shaunmostert1585 7 жыл бұрын

I find that the Tamiya spray is better and actually dries completely compared to their brush paint.

@servancastillo986 6 жыл бұрын

I'll be buying tamiya thanks to this!

@MonteHawk 8 жыл бұрын

Thank You! I just placed an order for one...

@Penspunk1967 6 жыл бұрын

Just found (and subscribed) your channel. I'm having problems with my nascar diecast that the paint gets orange peels and imperfections. Suggestions or a link on best way to wet sand to get the imperfections out?

@TheScalemodelingChannel 6 жыл бұрын

I have a couple videos on that. Check out my how to playlist

@lalofernandez246 7 жыл бұрын

what primer can do you use?

@Moon___man 4 жыл бұрын

any tips on painting fenders flares that molded on? pretty hesitant to start this kenmeri for that reason lol

@ItssLuBu 8 жыл бұрын

Nice build! Will you be doing any race/rally cars?

@Jay_Digital 3 жыл бұрын

Have you tried blue tape instead of yellow? The glue isnt so harsh on the paint when you peel it.

@joehouchens1675 8 жыл бұрын

awesome video, whats the name of that string mass tape you used and where do you get it....thanks

@TheScalemodelingChannel 8 жыл бұрын

The yellow tape is from KIP. The white tape is tamiya vinyl tape

@nizalmuhammad9689 5 жыл бұрын

Are you use? Primer surface?

@oscarsun9186 4 жыл бұрын

Hi, thx for the video. Could you please tell me what is the difference between tamiya gray and light gray surface primer.

@TheScalemodelingChannel 4 жыл бұрын

the color

@brycen3093 5 жыл бұрын

I will have to try purple power. The alcohol didnt even touch the paint

@Fifi346 7 жыл бұрын

HI The Scalemodeller :) I'm recently after spraying my Skyline R33 however I have a little problem. After painting i noticed that some places on the body I have some strange little spots. I doesn't look like dust. It is more like air bubbles. It makes terrible look on the body. Are you able to advise me what to do with it? Should I sand it down and then paint the body again, or just proceed with clear and then polishing with 2500 grit sand paper should do the job? Is there any other way to contact you than youtube?

@TheScalemodelingChannel 7 жыл бұрын

Your sparying to thick to quickly. you can sand it down repaint.

@andrei3720 6 жыл бұрын

I bought a metalic Silver spray can paint from a store. When I tried it on a spare bumper it came out nice and smoth. But whrn I lainted the body of the car it came out very matte. Is this because of overspray? It also peels of very easly.. I kinda messesd up...How is thia fixable? Will it be shiny again if I put some clear coat on it?

@TheScalemodelingChannel 6 жыл бұрын

+Andrei F paint is mostly matt if not clear coated. Did you sand the body and apply primer first?

@ShadySoldier222 7 жыл бұрын

1:24 scale u r spraying? I prefer to use this scale as it's easier to work with 👍 cool clip ✌

@MinaruKamui 7 жыл бұрын

Is that tape you used for the corners the 3mm wide tape? Planning on getting some and was wondering what size you were using in the video, looks perfect.

@TheScalemodelingChannel 7 жыл бұрын

Captain Kam i honestly can't remember. I have all the sizes available and pick wichever one works best in that moment

@patrolduty8715 11 ай бұрын

As the main color or prime coat paint, how many 1/24 model kit I can use for a single spray can? Thank you a lot.

@TheScalemodelingChannel 11 ай бұрын

2 maybe 3

@brycen3093 5 жыл бұрын

Hey Tom. Great tutorials. I was just wondering what u would recommend for stripping paint if I wanted to start over? Thanks!

@TheScalemodelingChannel 5 жыл бұрын

Isopropyl alcohol works most of the time

@scifiguy26 5 жыл бұрын

Purple power degreaser works perfectly you can get a jug at your local Walmart

@olegooo6708 3 жыл бұрын

Hello. Where to find this holder for model when you paint? And what is it? Thank you very much

@TheScalemodelingChannel 3 жыл бұрын

Tamiya spray stand

@cl2576 4 жыл бұрын

Do you wet sand before or after the clear

@zero00-100 6 жыл бұрын

Is there a video on fixing up paint build up? I applied paint on the wheels but went too thick. :(

@pg1171 5 жыл бұрын

ALWAYS be light with your paint. You can always add an extra layer, but removing it is a whole lot harder...and make sure you keep your spray paint, and bottle paint also, mixed. Stop spraying, give it a few shakes, and then continue. It will assure an even color. And keep it at room temperature. Paint that has gotten cold, especially if left outside in cold weather, can go 'bad'. It can bubble, or at worst, look like it has 'veins' in it. Plus, it get's slightly tacky, and is harder to remove. I live in Alabama. We have humid weather, sometimes cold winter, and it is terrible on spray paint, especially model paint. I don't have a dedicated spray area, so most of the time, I have to build models in the warmer months, and choose a day when the humidity isn't too high. If you are painting plated wheels, make sure that you un-plate them first. Just do that by first soaking them in ammonia for about 24 hours. Best I remember. That should remove any chrome plating. They should be chrome free, but still have a gloss. Apply a light coat of primer, then your final color. Your first color coat should be a light mist. Not heavy. Your second coat should take care of fully covering. Remember, always be sparing with your coverage. You have to think scale. The thinner the coat the better. Full color, but light coverage. It takes a little practice. The results are great! That should fix your wheel painting problem! Happy modelling!

@davidstinson5095 5 жыл бұрын

Lightly sand with 400 grit then 300 grit try to put a piece of sandpaper on a qtip.cotton suab to get in hard to reach areas

@gord9677 4 жыл бұрын

If you're painting with Acrylics, and you want to do a 2 tone paint job, should you clear coat before painting the second color? I'm worried about the tape pulling off the paint when I remove it. Thanks for your time.

@TheScalemodelingChannel 4 жыл бұрын

If you would pull the paint of without the clear. You would pull if off with the clear aswell. It has to do with the adhesion of the underlaying layers.

@tomdawson1314 6 жыл бұрын

What's the song that's playing around the 5:30 to 7:30 mark?

@Efire76 7 жыл бұрын

Where do you purchase your models? Ive only been able to get some models from amazon because in hawaii there isnt really a hobby store here for model cars lol

@TheScalemodelingChannel 7 жыл бұрын

Davyn Thornburg have a look in ebay. They have loads more!

@Targoon_Music 6 жыл бұрын

5:56 what song is this?

@biglou9662 8 жыл бұрын

What kind of sound track is that? Sounds more relaxing while working on my models.

@TheScalemodelingChannel 8 жыл бұрын

Its all from the youtube audio library

@pranajiwandhana8437 6 жыл бұрын

I've tried this method, and unfortunately the second color still managed to slip under the masking tape. How to fix the oversprayed area? Is it safe to use cotton swab with a bit of lacquer thinner? Need your advice. Thank you.

@TheScalemodelingChannel 6 жыл бұрын

Prana Jiwandhana gently sand it with some high grit sandpaper

@captainofiron 3 жыл бұрын

Do you clean your spray nozzle?

@mdbrynteson 2 ай бұрын

When you apply decals do you apply them directly on the paint then clear coat or clear coat and put the decals on the clear coat

@TheScalemodelingChannel 2 ай бұрын

You can do both. If you want to avoid silvering, then apply them on top of clearcoat. And clear over them

@gaboaaa23 4 жыл бұрын

Hello, i have one question! Are the tamiya silver sprays better then the normal spray cans? Becaause the ones for the real cars has so huge flakes that it looks unnatural on modelcars.

@TheScalemodelingChannel 4 жыл бұрын

they are specialy made for scale models

@gaboaaa23 4 жыл бұрын

@@TheScalemodelingChannel so if liht hits the paint, then there arent unnaturally huge flakes that are visible right?

@TheScalemodelingChannel 4 жыл бұрын

@@gaboaaa23 there should not be, no. though they have different colors with different effects...

@gaboaaa23 4 жыл бұрын

@@TheScalemodelingChannel i see! Thanks for the info!

@williamaviles2647 5 жыл бұрын

Can you tell me about the paint. Enamel or Arylic Water base? My 69 Chevy Nova would appreciate it. Tku.

@TheScalemodelingChannel 5 жыл бұрын

What do you want to know about the paints? They are Tamiya spray cans

@MonteHawk 8 жыл бұрын

Where did you get that body support? I've been using a bent clothes hanger..

@TheScalemodelingChannel 8 жыл бұрын

It is a Tamiya spray stand

@simonlenton5236 5 жыл бұрын

Can be found in any good modelling shop/outlet.

@Mumbles_UEL 3 жыл бұрын

Can you use regular spray paint?

@GAW912 7 жыл бұрын

I like the idea of tins for spraying, would it be ok to use car spray paints and lacquer, as long as they're acrylic?

@TheScalemodelingChannel 7 жыл бұрын

It would, but metallic colors will be a bit rough and out of scale.

@GAW912 7 жыл бұрын

Ah! I hadn't thought about that. The flakes and pearlescence would be too big. Thanks for the tip. Might consider it for priming and flat colours then. Keep up the good work, these are some of the best videos I've seen (and I've watched a lot!)

@a.c.jimenez8274 7 жыл бұрын

Which spray can paint do you recommend that dont have any strong smell? the only place i can work on my cars is in my bedroom :(

@TheScalemodelingChannel 7 жыл бұрын

All spray paints have a strong smell, don't paint in your bedroom!

@georgy4097 3 жыл бұрын

What type of KIP tape do you use? Do you know if other tapes work well?

@TheScalemodelingChannel 3 жыл бұрын

Try Tamiya

@kimmiwertz6744 5 жыл бұрын

Wouldn't it be much easier to use Tamiya panel liner for the thin lines?

@faitouri 7 жыл бұрын

instead of spraying the lines, can i use something simpler like a Sharpie or marker?

@TheScalemodelingChannel 7 жыл бұрын

Yes that is also an option. or paint it by hand with a brush

@PassionMaquette 5 жыл бұрын

Magnifique

@DieTabbi Жыл бұрын

Which masking tape is the wide one? I have only small found

@TheScalemodelingChannel Жыл бұрын

Tamiya

@fabienschurrle4727 8 жыл бұрын

can you do the same with tamiya paint from a jar with airbrush? also lac?

@TheScalemodelingChannel 8 жыл бұрын

+Fabien Schurrle Jup

@dasmuven1911 6 жыл бұрын

What’s the name of the song at 3:25

@johnnyringo1127 6 жыл бұрын

Awesome! Same Q as Antonia Gaspar. Where did you get the turntable stand and how did you come up with the paint booth?

@TheScalemodelingChannel 6 жыл бұрын

Tamiya paint stand

@johnnyringo1127 5 жыл бұрын

Thank you

@jamesgatlin4162 5 жыл бұрын

Can you glue parts together after painting. If so do you scrape the paint at glue points

@TheScalemodelingChannel 5 жыл бұрын

You can without scraping. I use super glue