If your using your air from the shop compressor to blow of the water make sure the compressor has an oil separator installed on it. If not a small amount of oil from the compressor can be blow on your newly cleaned part and this can cause fisheyes in the new paint.
@phobos2k25 жыл бұрын
Pro-tip!
@fkerpants8 жыл бұрын
Keep making these videos. I don't have one of these Mustangs, but videos like this keep customers coming back. Keep up the good work!
@latemodelrestoration11 жыл бұрын
Yes it is. It is the key to helping the paint last and not having to come back to redo the job later.
@johnpalma72657 жыл бұрын
Yeah,gloves might be a good idea, don't worry about contaminating the part,worry about contaminating yourself.A respirator may be a good idea also especially indoors.Thanks for the video.
@rcharne7 жыл бұрын
Is it me but nearly every video about applying rattle can spray dyes and paints have the guy doing the spraying not wearing a respirator or any protective coverings for the eyes, or skin. The ingredients in rattle cans are lethal. I have a neighbor who used to paint tons of stuff in his garage using rattle cans and over the years, he became very ill from the buildup of toxins in his blood. And those toxins get in your body, they don't leave
@jovannigonzalez40205 жыл бұрын
No pussys here sir
@dreamingcode3 жыл бұрын
I just picked up a 71 GTO. I'm want to use a lot of interior parts from my 70 Lemans donor to save on cost. Thanks for posting this!
@keithmorrison41829 жыл бұрын
Amazing, was trying to figure out a way to get new speaker grills for my 91 vert. Since they no longer make them and a friend suggested I just paint my original ones. I followed the instructions like I have with so many other Late model resto videos and nothing short of excellent. These guys really know there stuff and know how to make an old car look young again. I added a coat of primer in the mix but regardless my speaker grills look brand new. Thanks Late model resto!
@davieboy1970 Жыл бұрын
I see everybody talking about how important it is to get all that dirt and grease off the surface.. my interior on my Mustang was so stand. It was horrible. I couldn’t get it all off. But I still ended up painting it over the stains and it actually turned out super nice.
@noncents26643 жыл бұрын
HAHHHAAAAA! he really said dont be huffin paint! lmfao! that was funny
@marcotoni2319 жыл бұрын
you guys are really good at explaining things and making them simple. good job
@Carlos-bc4gl8 жыл бұрын
dude's a savage @7:42 lolol
@Monstero5o7 жыл бұрын
love it HAHAHAHA
@dntlss6 жыл бұрын
I work with industrial engines and we clean a lot of parts with lacquer thinner and we use about 30 gallons a week, mind you we use gloves and masks and we dont spray it period, we just use small brushes and cleans parts with them, after many years you become immune to it,basically you dont get high anymore,we have customers come in sometimes and go DAMN!! I'm gonna get drunk here! and we just look at them like, what??
@josephschubert18486 жыл бұрын
carlitosnueve p
@Anaconda-squeeze5 жыл бұрын
@@dntlss you probably just think that you're immune but in reality you're already brain damaged...
@sturdyg635 жыл бұрын
@@dntlss ure brain is done my guy
@calebponder6910 жыл бұрын
You guys at 5.0resto are rad i havent ordered parts yet but when i do you guys get my vote the extensive rezto vids are just what the stang Dr ordered keep up the awesome work ! (86 four eye 5.0 GT) ;)
@vppnbrent10 жыл бұрын
I could smell that paint :)
@1Wickey311 жыл бұрын
I'm lovin' all these resto videos from you guys.
@davidmcclelland80908 жыл бұрын
Titanium that was the color of the (then) brand new 90 Mustang GT I bought when I was 19 and it had the power mirrors. :-D
@barbarakalchik11804 жыл бұрын
Have a 73 Camaro. Some of the interior parts are metal, can these paints be used on those as well and what is the prep process? You guys put out some awesomely simple informative videos! Barbara
@jasonmattison67343 жыл бұрын
Would love to see you paint an old original part that isn't brand new. Because I am getting totally different results than the video!
@latemodelrestoration11 жыл бұрын
Follow these process to properly paint your interior. The vinyl wrapped material on dashes needs to be painted with the vinyl and the hard plastic parts need to be painted with the Laquer. Feel free to call our customer service team to help you determine what color you need 1-866-507-8871
@mikehessbowling89505 жыл бұрын
Just got a 90 gt, with red interior, I want to switch to black interior to go with plans for the car. Should I paint the trim or try to find the pieces in black?
@whf38265 жыл бұрын
the video is very informative
@MO-qc6dy8 жыл бұрын
J-Mac?
@trentbdog11 жыл бұрын
Thanks for all of these videos! You do a great job explaining everything and now I am inspired to do some of these things on my '91 5.0
@Snakejunn11 жыл бұрын
First of all, thank you for posting these videos. these are a great resource for people like me who need a little extra help or ideas. I have a couple of questions. #1 - Maybe this was answered already, but can these dyes/paints be used for a color change? I have the gray in the video and like many want to change to the rare black interior. #2 - Maybe a stupid question, but do the scotch brite pads come in different grits? Just want to be thorough.
@ummwhodidnt2 жыл бұрын
FYI people, These aren’t good for color CHANGING. The old color will start to show through unless maybe you use the adequate primer.
@cuenta22024 жыл бұрын
Could this be used on a chevrolet c1500 interior parts i purchased the truck with brown interior and that interior ages pretty bad looks dirty even if clean i would like to either restore color or change to gray the truck is a 91
@jasonjackson56967 жыл бұрын
Nicely done
@ColdWarVet6072 жыл бұрын
Nice jobs, thanks much. You did, rather nicely a different color but very close to the original. I want to do a completely different color change. Does that work with the dye. Is vinyl / faux leather subject to blotching? Thanks
@latemodelrestoration2 жыл бұрын
Thank you for the feedback! If done incorrectly or the prep work isn't good, vinyl/faux leather is subject to botching. I would recommend watching a dedicated video pertaining to refinishing vinyl/faux leather.
@ohguy19917 жыл бұрын
I would have thought you should rinse the parts after scrubbing them to rinse away any soap residue
@1cbjack11 жыл бұрын
Good vid! Preparation is everything!
@FancyAnimal4 жыл бұрын
You’re better off going to a paint store and looking at paint chips to match the color. I painted the console with the smoke gray and the shade wasn’t even close...way lighter. You’d have to paint the entire dash and armrest to get this to work just due to the aging and UV damage of the existing interior color.
@roadstar4998 жыл бұрын
great job! I have a gmc truck 2004 which needs interior touching up...where do I purchase the correct color paint mainly dash board which is vinyl...thanks
@Valdemar-Perez-III3 жыл бұрын
I know I'm late but sem has paint and has a book full of oem colors. My local paint shop had that booklet and I was able to get the right color for my truck.
@ZacDowen18 жыл бұрын
1:28 is he doing this video is his Pyjama Bottoms?!?!?!
@Drew-hu7hb6 жыл бұрын
Nice catch, he is.
@yeaboi8216 жыл бұрын
Lmao they're shorts
@FoxFreak11 жыл бұрын
Great video. J-Mac you are an excellent host, but I gotta be honest I bought 12 cans of the 90-93 black SEM paint from you guys and changed my interior from "porno-red" to black and the red is quickly starting to show its ugly face again. I know the prep was done very, very well and I know the paint is a good quality product, but I would recommend against using paints or dyes to change one's interior color. Advice to others: Just buy OEM plastics in your preferred color when applicable. Thx
@ummwhodidnt2 жыл бұрын
I might be 9 years late but Should’ve used primer buddy. Mainly commenting this for people that are gonna try this like me. Watch a different video that’s for color CHANGING interior for the right process.
@deadpool19666 ай бұрын
An just like that we changed this grey arm rest to another grey
@sms91069 жыл бұрын
Excellent and I don't even have a Mustang!
@dragonrider90513 жыл бұрын
Curious how well that has held up after these last 8 years?
@BattleBornFLB11 жыл бұрын
However, this is a pretty cool restoration video.
@2424ebrandon11 жыл бұрын
Will this work good for the dash? Mine is really faded and I want to make it all black anyways.
@SgtJoeSmith7 жыл бұрын
will that spray open the pores on my face too?
@EricNguyener6 жыл бұрын
Can you guys make a video on respraying a black front molding? The molding isn't detachable and is a part of the front bumper cover, unlike the side moldings.
@austinpalmer42953 жыл бұрын
Is the 2005 mustang gt black interior the same as the 2004 interior Bc CJ pony parts doesn’t offer black paint for the 2005 mustang gt
@latemodelrestoration3 жыл бұрын
We offer interior paint for 05-09. Here's the link: lmr.com/item/MET-FV5B8K/05-14-mustang-interior-paint-kit-charcoal-black
@johnargue29778 жыл бұрын
While the armrest is out, you probably should reinforce it, cause those plastic break easy. :) layer of concrete or something.
@hector9710008 жыл бұрын
i broke my dad's cover that goes over the ashtry and the socket
@johnargue29778 жыл бұрын
+Hector Romoarias maybe try fixing it then put epoxy under it.will hold for awhile but should've been built heavy duty in the first place.
@hector9710008 жыл бұрын
Right
@myleskenny33078 жыл бұрын
+john argue I have spent months researching into spray painting and discovered a great resource at Magic Painter Method (check it out on google)
@dntlss8 жыл бұрын
+Pablo Hd There is a kit they sell that fixes that ashtray issue for good, you probably didn't break it, what happens is there is a little spring in there thats twisted real weird for the ashtray to open with a snap and sometimes the spring becomes dislodged requiring disassembly to relocate the spring to the original position. What the kit does is it reinforces the spring with a little bracket thats drilled to the ashtray arm so the spring wont jump out anymore, i fixed mine 8 years ago and still works perfect
@PainterFRO7 жыл бұрын
Or you could scuff the parts with the Scotch Brite pad without the soap and water, wipe it with some wax and grease remover then tack it off with a tack rag and you are ready to paint.
@nickalbanese234 жыл бұрын
I bought a can of 99-04 charcoal black and the can sprays clear stuff and not the color no matter how much I shake it
@latemodelrestoration4 жыл бұрын
We apologize for the inconvenience! Please send us an email at customerservice@lmr.com and a CC representative can help you out with your issue! Thanks - Jude H. - Social Media/Events
@luistangt7 жыл бұрын
can i go from tan to black?
@TrOlLkInGs144 жыл бұрын
Yes sorry for a major late reply
@2vgod4604 жыл бұрын
What is your doing a colour change? I order the 2 pint kit I have parchment interior and I’m doing a two tone black and parchment, I was told to sand off old colour, wondering how y’all would say to do it
@sergioramirez-dq9eu11 жыл бұрын
halo soy ed mexico muy buenos videos felisidades
@BlightedOs10 жыл бұрын
Hi, great video, however i have a question - what if i want to make an interior part a bit glossy, should i put any lacquer coat on the paint and then polish it until i get results I am wanting, or it isn't necessary?
@kdryan218 жыл бұрын
Great video but I would have loved to see you change the color on it. It's exactly the same procedure?
@hartsteam9 жыл бұрын
Thank you,..... This was a huge help!
@SugaryPhoenixxx7 жыл бұрын
"Don't leave it on too long, it WILL cause surface damage." As he is wiping it off with his bare hands lol.
@Archeides7 жыл бұрын
He's using a microfiber towel though. He's just holding it still with his hand.
@SugaryPhoenixxx7 жыл бұрын
I used this method on my interior. The grease & wax remover melted the paint of a piece of plastic in 5 seconds. Oh well. His hands, not mine!
@PainterFRO7 жыл бұрын
Wax and grease remover isnt gonna hurt your hands.
@PP-py4tn3 жыл бұрын
warning: unless you're a shitty car flipper, this fix won't last on your own daily driver. the paint will scratch off very easily and you'll see the original color on every scratch.
@fredmauerman49085 жыл бұрын
How do you go about changing the oil dipstick tube...I have a 90 Fox gt..and the dipstick is broke where it bolts to the header want to replace it have the replacement got the chrome Ford racing one from LMR..thanks any help plz
@cobyp998 жыл бұрын
Would you be able to use this on other manufacturer cars. Like lets say a nissan 300zx?
@hotrodlincolnchannel62668 жыл бұрын
As long as it's the same material as in the video then yes.
@El_Baronn4 жыл бұрын
Can you change colors, go from red to grey, or that just won’t work?
@kelleyharris26386 жыл бұрын
What's best stuff to paint the interior trimming in me car (eg: shade visor , light fittings + more) some say dye some say plastic wrap paint ????
@joelbranscum79976 жыл бұрын
Of your going to do this do everything he said but when you wipe the pannel with the alcohol if you see anything on the rag it's not clean enough it will peal.
@latemodelrestoration11 жыл бұрын
You use this paint method to repaint to different color. It is easier to go from a light color to a darker color. I would suggest you check out our website and look at some of our door panels before repainting a full door panel. Give us a call 1-866-507-8871
@jamessalter6766 жыл бұрын
How well does this paint hold up if you was to do a color change on the vinyl and plastics? 🤔
@aaronortega53753 жыл бұрын
So I want to paint my the interior of my Chrysler Sebring from a silver to black. Using these same methods will it work on my plastic dashboard and vinyl seat fabric?
@latemodelrestoration3 жыл бұрын
Using the same methods, yes it'll work. Just make sure to clean everything so you don't have any imperfections.
@2vgod4603 жыл бұрын
Hello? What if you wanna change the colour? Do you need to sand the old colour off?
@latemodelrestoration3 жыл бұрын
We recommend using some paint removal and fine sandpaper. However, you can also use the primer and paint over the pre-existing color if needed as well.
@xxlosbanditosxx72033 жыл бұрын
That's definitely my thing! Lmfao!
@alexclakley81508 жыл бұрын
Would a 93 ford pick up be the same way as that? and my dash is red but I wanna paint it black would I do the same process just with the black paint??
@mustangman72211 жыл бұрын
whould it be ok to use the vinyle paint on the carpit on the door panel mine is faded
@drchaosrc7245 жыл бұрын
What's a good way to remove paint off plastic interior. I bought a 84 mustang, looks like the interior was tan, and the owner before painted it a bright red. It wasn't a good job as it's chipping, but want to bring back to stock. Any suggestions
@latemodelrestoration5 жыл бұрын
Denatured alcohol will normally do the trick for removing the old paint. This will not be as harsh as some acetones that could eat the plastics. Make sure to clean as much off as possible first using the red scotch brite with soap and water first, then go to the alcohol for the last step.
@AviatorRL75311 жыл бұрын
Is it safe to Armor All the interior after its painted after a few days or will it damage the paint?
@Mr187monkey4 жыл бұрын
Would this make the car smell like paint
@dennisarapcic363910 жыл бұрын
Would I just have to do more coats if I wanted to do a red to grey or black? I think red interior in my 89 is hideous
@marqueswilsonn4 жыл бұрын
How hard is it to take a gray piece and turn it blue for a 93 Silverado?
@david3720311 жыл бұрын
Hi thanks for all your Fox Body videos. I have used some similar paints in the past. Did these come out flat or with the proper gloss? Thanks
@LK-fz7vr4 жыл бұрын
I feel like no matter how many times you cost using spray paint it always tends to chip or scratch easily. Is this expected on this project?
@latemodelrestoration4 жыл бұрын
With this type of paint, you can get away with a little more flex than with other paints since it is designed for interior surfaces.
@latemodelrestoration11 жыл бұрын
Thanks!
@latemodelrestoration10 жыл бұрын
these paints are designed for vinyl and plastic parts. What rubber are you trying to paint.
@comtec2511 жыл бұрын
I just purchased your black 79-86 console dash pad a few days ago along with a can of your Canyon Red spray paint. Due to the black color of the dash pad, should there be a primer type base paint before spray painting it with the Canyon Red? If not, will your simple video process work to cover the dark black color? As for your video, you're simply coloring over with the same type color versus fully changing to a different color. Thank you..
@lordrockable11 жыл бұрын
I have some scratches on my dashboard and i wish to repaint them to remove those scratches, should i follow the same instructions that are provided in this video? and how can i tell the exact color of my dashboard? and what kind of paint should i choose for the job so it doesn't peel off or look off? thank you.
@audunjemtland82879 жыл бұрын
Some people scuff/sand and then paint without primer. Is that good enough for a thorough paint job? Is it either or... Like. Could you clean, prime, paint. or scuff and paint?
@Cisco42539 жыл бұрын
I cleaned with a scotchbrite pad with soap and water and then used duplicolor adhesion promoter and painted. I tried scraping a part that's hidden when it's all together and it took effert to actually scratch it.
@arturogomez84556 жыл бұрын
Hello good afternoon, I got a Mustang 1989 5.0 Coupe, how many cans you think I need to paint the seats and all the interior without dash,
@malloymotorsports7805 жыл бұрын
i know this is an old video, but another SEM paint job done incorrectly. if you read the instructions it clearly states to apply the sand-free first then apply color without letting the sand free dry. this process chemically bonds the paint to the substrate. don't know why every interior paint video leaves this out.
@ikaros216 жыл бұрын
does it feel rough to the touch?
@fatwalletboy27 жыл бұрын
is it long lasting ie: what are long term effects of sunlight and heat and cold with painted plastic trim?
@latemodelrestoration7 жыл бұрын
If you prep the surface well and lay down nice, even coats then this paint will last a very long time. I sold my old '99 Mustang GT to a local guy that I still talk to, and the pieces I repainted in that car are still going strong after 7 years. -Landan
@marioatrucking11 жыл бұрын
Nice bro:)
@875daily11 жыл бұрын
i'm guessing this will work on any interior plastic pieces?
@LittleDropOfEmpathy11 жыл бұрын
i'm just looking for a good way to do interior parts for an 88 sprint. would this method work on plastic handles as well?? what clear coat would you suggest?
@bobkeller83835 жыл бұрын
How do you take the dash plastic out to repaint or dye?
@elaxel14697 жыл бұрын
Which is the best distance to avoid bubbles when painting?
@Archeides7 жыл бұрын
6"-8" is what he said in the video.
@jasonnapier85585 жыл бұрын
Why would you not use a different color to show the difference ?
@joshuapinkston761710 жыл бұрын
Do you need any clear coat?
@nayz-6 жыл бұрын
Is a prep spray really needed?
@DJdavefromlondon3 жыл бұрын
Hi. How do I tell what is vinyl vs what is plastic. I have a hard dashboard I want to paint
@latemodelrestoration3 жыл бұрын
Hey there, Our interior paint kits will work with both vinyl and plastic interiors. Check out the link for all of our interior paint kits here: lmr.com/products/79-93-Mustang-Interior-Paint-Spray-Dye
@koreynapier73908 жыл бұрын
On the bottom left?
@desert075765 жыл бұрын
Why didn't you do a demonstration on a color change
@regioexas8 жыл бұрын
My meduim grey airbag is peeling , i got black spots on it, its a 99 silver stang , can i use this can to cover the peeled area, also i lost the passanger airbag vinyl part, i could find the same color at local junk yard i got a tan one, can i use this bottle to change the color ? It will looks the same as factory vinyl on doors and center console?
@regioexas8 жыл бұрын
Could'nt*
@andersonsspeedshop30518 жыл бұрын
+Chris D Couldn't*
@chronosun1310 жыл бұрын
how many cans would you recommend to refresh all plastics and metals in the interior? Also will these sprays get tacky in the south texas heat?
@dragonrider90513 жыл бұрын
8 cans for a car 6 for a truck, 3 cans of plastic adhesive for prep. It's dye color not paint, it will bond if done correctly no tacky feeling like paint. Those first two coats going with a light dusting is key to longevity.
@robertboyd3214 жыл бұрын
I can't tell the difference between before & after
@justafanmarvel96697 жыл бұрын
can you dye or paint an interior from a darker color to a lighter color or only the other way around?
@Archeides7 жыл бұрын
I'm not positive, but I would think that if you put enough coats on it, it should be fine.
@bill1usmc6 жыл бұрын
Why would you paint a brand new part the exact same color it was? 🙄
@davies865 жыл бұрын
Was thinking the same thing
@finnishfatman5 жыл бұрын
For a demonstration purposes, if these guys are so pro, they only have brand new parts that they can work with? :P They'd be like "what? A used part?! Get that shit out of here!!!" :'D
@tonycervz89 Жыл бұрын
For boosting product performance
@baymechanic10098 жыл бұрын
Is there a Dye for Brown fox interiors?
@outtybeastjr365310 жыл бұрын
funny thing is about these paint videos, your surrounded by rims and sometimes cars, aren't you worried about overspray ?
@AkronKid3309 жыл бұрын
Haha right. But I'm sure they don't care it's only display items
@outtybeastjr36539 жыл бұрын
lol
@jfresh20547 жыл бұрын
why do you only sell mustang accessories?
@nick7.3985 жыл бұрын
Could this work to make it black interior? I have tan and want black
@latemodelrestoration5 жыл бұрын
Yes, you can go through your interior and paint or dye these items to do a complete color change.
@jaredallan0711 жыл бұрын
is any clear coat needed?
@gustavopolanco69257 жыл бұрын
Does the sun damage the paint if you paint the dashboard? I live in Florida and the heat its ridiculous. Lol
@latemodelrestoration7 жыл бұрын
The sun will damage anything when it's exposed. I would invest in a good windshield visor and ceramic window tint. -Landan